• 복식
• /
• 제53권1호
• /
• pp.67-75
• /
• 2003

From ancient times. lotus pattern had esthetic factor and symbolic factor. Lotus pattern was introduced to China, and it was grafted together with Chinese peculiar culture symbol system, thereafter it has changed and developed. The Chinese taking a serious view meaning that things include, and they frequently use several lucky omen patterns in their everyday life. In this study, I investigated laying stress on symbolism about Lotus patterns of China lucky omen patterns, and I wanted to present possibility that can approach to Chinese culture in new angle. Through result of this study, symbol of Lotus patterns can divide two directions. First, symbol by natural properties of lotus are same as following. 1. Lotus grows in the mud, but it is uncontaminated - clearness and uprightness, 2. Root, branches, loaves and flowers are vegetative together, and all of basis and branches are exuberant. - plenty, 3. Bear fruit simultaneously with blooming, and it is procreant. - fecundity and many descendants. Symbol that use same pronunciation and intention are same as following. 1. 'Lian(연)'-'Lian(연)' : repeatability, continuance, plenty and intercommunicate, 2. 'Lian(연)'-'Lian(염)': integrity, 3. 'He (하)'-'He(화)' : peace, harmony and combination, 4. 'He(하)'-'He(하)' : clear river, 5.'He(하)'-'He(하)' ; all work goes well. When the Chinese use lotus patterns in lucky omen patterns, same pronunciation and pitch of Chinese language more prominent than natural properties or the image of Buddhism. I guess that it cause praying individual's peace and happiness more serious than philosophical meaning or symbol that base in Buddhism for ordinary people.

• 한국의류산업학회지
• /
• 제13권6호
• /
• pp.990-995
• /
• 2011

This study analyzed the effects of the knit stitch type, fiber composition, and yarn thickness on the mechanical properties of knitted fabric. The results were as follows: The course density was the highest in the case of the rib stitch. On the other hand, the wale density was the highest in the case of the float stitch. The thickness was the highest in the case of the rib stitch. The same results were obtained even for different fiber compositions and yarn thicknesses considered in this study. The burst strength of wool knit fabric was higher than that of A/W knit fabric. The stiffness was the lowest in the case of the plain stitch. The same results were obtained even for different fiber compositions and yarn thicknesses. The pilling properties were excellent for all knit stitches, fiber composition, and yarn thicknesses as pilling degree : 5. The air permeability decreased in the following order : rib > plain > float stitch. The same results were obtained even for different fiber compositions and yarn thicknesses. The heat retention rate decreased in the following order : rib > float > plain stitch. The same results were obtained even for different fiber compositions and yarn thicknesses.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.214-215
• /
• 2002

Generally uniform dose distribution is assumed to be formed in a target region when a conventional dose formation method using a broad proton beam, a fixed modulation technique, a bolus and an aperture is employed. However, actual situations differ. We usually find non-uniformity in the target region. This is due to the insertion of a range-compensating bolus before the patient. Since the range-compensating bolus has an irregular shape, the scattering in the bolus depends on the lateral position. Dose distribution is overlapping results of dose distribution of pencil-proton beams traversing different lateral positions of the bolus. The lateral extent of dose distribution of each pencil beam traversing the different position differs each other at the same depth in the target object. This is a cause of the non-uniformity of the dose distribution. Therefore the same lateral extent of dose distribution should be attained for different pencil beams at the same depth to obtain a uniform dose distribution. For that purpose, we propose here a bi-material bolus. The bi-material bolus consists of a low-Z material determining mainly the range loss and a high-Z material defining mainly the scattering in the bolus. After passing through the bi-material bolus, protons traversing different lateral positions will have different residual range yet with the same lateral spread at a certain depth. Using the optimized bi-material bolus, we can obtain a more uniform dose distribution in the target region as expected.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.739-742
• /
• 2000

From the experimental study of W-EDM for alloyed steel, the characteristics such as Hand Drum Form and surface roughness have been observed and evaluated for various conditions. In square hole, the increase of If as to made condition the calculate high value of surface roughness. Also compare dimensionless square hole with circle hole' graph. In circle hole, if a value of surface roughness IP 6 in a side of circle it show a 0.4${\mu}{\textrm}{m}$ and in IP 8, 0.6${\mu}{\textrm}{m}$, in IP 10, 0.7${\mu}{\textrm}{m}$, in IP 12. 0.8${\mu}{\textrm}{m}$ higher than before. This figure show the surface roughness is higher than before, because a table move in either X-axis or Y-axis in square hole, on the contrary, in circle there table move in X-axis and Y-axis at the same time. hand drum form getting small when wire tension increase 1000gf to 1500gf, at the same working conditions. the smaller of off time, the mailer of hand drum form in same condition and same wire tension. but if you compare square hole with circle hole' graph hand drum form displayed in maintained term of working condision, on the contrary, in case of square hole variation of hand drum form is more increase than a grow of IP

• Journal of Welding and Joining
• /
• 제19권6호
• /
• pp.622-629
• /
• 2001

The aim of this experiment is to establish the method that obtains symmetrically two nuggets in microresistance series spot welding. The sheets of austenite stainless steel STS304 applied to various electronic parts were experimented by the inverter welding power source of polarity controllable type and by the twin head for left and right electrode force to be controlled separately. The experimental results were obtained as follows : 1) When series spot welding was carried out by DC 1 pulse as welding current with same electrode force at left and right, the asymmetry of nuggets was resulted from the larger nugget of the (-) pole because of the Peltier effect. The dynamic resistance of weld spot at left and right was appeared differently according to the growth of nuggets. 2) When AC 1 cycle by welding power source of polarity controllable type was applied, the nuggets were almost symmetrically formed. 3) In a twin head, if the electrode force of (-) pole was larger than that of (+) pole, the diameters of two nuggets became to same. It was confirmed that the dynamic resistance of (-) pole was decreased to the same level as it of (+) pole. 4) Although the forces of left and right electrode were same, and only DC 1 pulse was applied, symmetric nuggets were obtained if the conductivity of (+) pole was lower than it of (-) pole.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.567-572
• /
• 2000

From the experimental study of W-EDM for alloyed steel, the characteristics such as Hand Drum Form and surface roughness have been observed and evaluated for various conditions. In square hole, the increase of IP as to made condition, the calculate high value of surface roughness. Also compare dimensionless square hole with circle hole' graph, In circle hole, if a value of surface roughness IP 6 in a side of circle it show a 0.4${\mu}{\textrm}{m}$ and in IP 8, 0.6${\mu}{\textrm}{m}$, in IP 10, 0.7${\mu}{\textrm}{m}$, in IP 12, 0.8${\mu}{\textrm}{m}$ higher than before. This figure show the surface roughness is higher than before, because a table move in either X-axis or Y-axis in square hole, on the contrary, in circle there table move in X-axis and Y-axis at the same time. hand drum form getting small when wire tension increase 1000gf to 1500gf, at the same working conditions. The smaller of off time, the maller of hand drum form in same condition and same wire tension. but if you compare square hole with circle hole' graph, hand drum form displayed in maintained term of working condision, on the contrary, in case of square hole variation of hand drum form is more increase than a grow of IP

• Fisheries and Aquatic Sciences
• /
• 제3권3_4호
• /
• pp.222-227
• /
• 2000

Fabrea salina living at salt pond is an interesting ciliate in the research of photobiology and live food for aquaculture. This study was carried out to understand the natural habitat of F. salina at salt pond, which would be a basic biological knowledge for the indoor mass culture of this ciliate. In this research, the water quality as temperature, salinity, dissolved oxygen, and chlorophyll-a was examined with the population density of the ciliate at salt pond. The highest population density of F. salina occurred at 109 ppt and $31^{\circ}C$with 2,390 inds./L in August, and the distribution of the ciliate was positively correlated with salinity, temperature, and chlorophyll­a. Even though F. salina is a very euryharine ciliate, it did not occur at the salinity below 47 ppt in this study. Its reason is able to be explained with the occurrence of many predators as small fish and food competitors as zooplankton living at low salinity of salt pont. While F. salina occurred with Anemia at the same habitat using the same food source, the optimum salinity for the ciliate was a little higher than that of Anemia, and the optimum temperature for the former was a little lower than that of the later. This should be a reason for that these two species have different ecological nich at the same habitat using the same food source.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.64-65
• /
• 2017

The existing hot and cold water supply system have a few problems such as construct ability, damage of the building, maintenance and the unequal distribution of water supply flow. So the system has needs to be improved and the Flow Equal Distribution System(FEDS) in series connection has been innovated by Idin Lab which relieve the existing problems. Thus, the purpose of this study is aimed to show the merits of FEDS with an real example of construction site of Wirye Terrace, D builder. 1. FEDS enables builders to save construction cost as the system in series connection does not need to equip both allotters and loop piping system. 2. FEDS contains a cartridge of water saving function so it mainly reduce the unequal distribution of flow and sudden temperature deviation of hot water supply at the same time. 3. FEDS allows repairer to maintain the water supply system at the same floor that could get rid of disharmony between dwellers who live the upper/lower story of the same building. Therefore, the FEDS will be applied when the building is remodeled and constructed.

• 한국과학교육학회지
• /
• 제15권3호
• /
• pp.263-274
• /
• 1995

The purpose of this study was to find out effect of problem solving by mental demand of items and chunking level of problem solver on the item. The principal findings of study were as follows ; 1) According to increase of mental demand of items. students' achievement score appeared to decrease and the more mental demand an item needed. the higher or at least the same hierarchical item was. These results showed that mental demand of item was main factor which decided difficulties of problem solving. 2) Though items have the same mental demand. students' achievement score were different between balance beam task and 2nd law task (achievement score of balance beam task < achievement score of 2nd law task). 3) Achievement score of LM group who used chunked knowledge to solve balance beam task were higher than non LM group who used non chunked knowledge. 4) The level of chunked knowledge was different between two tasks when non LM group solved items of two tasks. On the other hand, LM group used the same level of chunked knowledge to solve items of two tasks. 5) Achievement score of non LM group was the same between items of two tasks after treatment due to chunking effect by treatment. But achievement score of LM group didn't change before and after treatment. The chunking effect by treatment had an effect on non LM group, but it was not on LM group.

• 한국컴퓨터정보학회논문지
• /
• 제22권10호
• /
• pp.179-187
• /
• 2017

In spite of the rapid change of the technology, the university education cannot escape from the traditional form of classroom teaching. University education is assessed through listening the same content of lecture, completing the same assignment and test at the same time, same place. To prepare for the 4th industrial revolution, it is investigated to reorganize the curriculum(32.5%), strengthen the lifelong education(21.4%), expand the compulsory education(17.6%), expand the innovation school(13.7%), expand the educational finance(10.4%) as the field of education which need to be strengthen. The change of the education is essential to prepare for the 4th industrial revolution which creativity, collaboration, fusion, problem solving are the core ability. In this thesis, it is to be compared that the subjects opened in liberal arts of domestic and overseas university in this 4th industrial revolution and Basic Liberal Art Education Curriculum is promoted for the smooth management for preparing the future and taking the action to the change. Stereotyped and inflexible frame should be changed to 'Structure', 'Recognition', 'Attitude' for making the base of 'Diversity', 'Personalization', 'Flexibility' which are needed to uplift 'Imagination', 'Creativity' for education of the future and the new era.