• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.3
• /
• pp.197-203
• /
• 2008

This study analyzed the characteristics of sea water transport between Busan New-port and the Nakdong River estuary. Numerical modeling was used to evaluate the characteristics of the tidal current. Numerical simulations of three different topographies were conducted. The results are summarized as follows: 1) The volume of sea water transport was reduced by $0.7{\sim}18.4%$ when water depth was decreased at Busan New-port (10 m); 2) The volume of sea water transport was increased by $3.5{\sim}21.9%$ when a channel (depth 5 m) was constructed in the direction of the Nakdong River estuary.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.4
• /
• pp.101-111
• /
• 2013

In this study, DEA (Data Envelopment Analysis) was carried out on the four bridges, which have the same extension (L=1,615m), in order to select the most superior, economical method of construction using the LCC concept of each bridge structure in the case of the Ulsan-Pohang double track railway which is scheduled to be constructed. DEA models were analyzed with the CCR model, which was designed for the evaluation of relative efficiency of each model. The initial construction costs, maintenance costs, indirect costs (user costs + indirect loss of social costs), and life cycle costs were used as input variables, and average duration was applied as the output variable. LCC was applied to calculate the input variables, and to get the costs of LCC, 100 years of period and 4.83% of real discount rate were applied, and the costs are classified into initial construction, maintenance, user, and indirect loss of social cost. The analysis results showed that the Method 2 and 3 were evaluated as the most efficient, and the other alternatives were evaluated as the following order; Method 1, the default, and Method 4.

• Journal of Wetlands Research
• /
• v.23 no.4
• /
• pp.342-351
• /
• 2021

The objective of this study is to evaluate the change of groundwater and its effect to hydraulic head or parameter sensitivity in order to predict the effect of a new groundwater well using MODFLOW. With the downstream area of the Jun stream basin in the Donghae city, two condition were simulated; (i) First simulation condition is to simulate natural steady-state and the groundwater heads for observation wells are calibrated. After the calibration, existing wells are simulated to find out the pure effect of the next simulation condition, (ii) Secondly, the design wells are planed and simulated for the solution of water shortage problem at Donghae city. As a result of the simulation, the maximum drawdown which is approximately 0.35m occurs in layer 1. This represents that there is no intrusion of salty water and the design plan is acceptable. Finally, the sensitivity analysis of each parameter in MODFLOW is accomplished. We found out that the sensitive parameters are initial head, anisotropic factor, hydraulic conductivity, and general head boundary

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.3 s.25
• /
• pp.133-140
• /
• 2007

Spatial structures is a appropriate shape that resists external force with only inplane force by reducing the influence of bending moment, and it maximizes the effect of structure system. An economic analysis is one of the most important factors to determine the project feasibility. Large spatial structures project is more need to comprehensive technology than a general construction project. In order to result in success of these project, it is desired that analyze an essential elements(for example, large budget, professional engineer, construction method, etc.) in the whole life cycle of buildings by schematic preparation from the early feasible study steps. We collect the data and analyze construction cost through this study which examines general remarks of existing spatial structures and researches its examples. This study is aimed to apply basic data to establish database the spatial structures.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.5 s.54
• /
• pp.25-31
• /
• 2003

Numerical experiments have been conducted using the nonlinear combined refraction-diffraction model, in order to analyze the generation characteristics of stem wave, which is formed by the interaction between vertical structure and the oblique incident waves. The results of stem wave are discussed through the stem wave height distribution along/normal vertical structure, under the wide range of incident wave conditions-wave heights, periods, depths, and angles. Under the same wave height and period, the larger the incident wave angle, the higher the stem wave heights. According to the results of wave height distribution, in front of vertical structure, the maximum of stern wave heights occurs in the location bordering the vertical wall. Furthermore, the most significant result is that stem waves occur under the incident angles between $0^{\circ}\;and\;30^{\circ}$, and the stem wave height ratio has the maximum value, which is approximately 1.85 times the incident wave height when the incident wave angle becomes $23^{\circ}$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.957-961
• /
• 2009

본 연구에서는 강우시 발생되는 비점오염원의 모니터링시 측정되는 강우자료와 유출자료, 수질 자료에 대한 효율적이고 신뢰성 있는 자료관리시스템을 제안하고자 한다. 비점오염 모니터링 자료관리시스템(NP-DAQ, Nonpoint-Data Quality Assessment)의 구성요소는 크게 다음과 같은 세가지로 이루어진다. 비점오염원 분석이 요구되는 유역에서의 모니터링 유무 및 실시간 측정 장치의 유무를 확인하는 전처리단계, 선행무강우시간 및 강우지속시간, 강우강도를 평가하고 수질 측정 간격과 유출 수문곡선을 평가하는 품질관리 단계, 측정된 자료의 이상치 분석과 유출모형의 입력자료를 생성하는 후 처리 단계로 나눌수 있다. 본 연구의 적용 대상 자료는 낙동강수계 환경기초조사사업으로 수집된 비점오염원 모니터링에 대한 자료를 사용하였으며 측정된 자료는 지목별 지역별 특성에 따라 분류하여 자료관리시스템에 적용하여 분석하였다. 따라서 비점오염원 모니터링 결과 얻어진 강우 및 유출, 수질 자료를 대상으로 하여 자료의 신뢰성 평가 및 불확실성을 평가하여 보다 정확한 오염물질 유출 특성을 분석하는데 기초가 되는 시스템을 구축하고자 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.123-130
• /
• 1992

The quantity point has been considered prior to the quality point in the water resources development and management. However, the quality problems have become as important as quantity problems due to the industrialization and civilization. This paper presents a methodology of the integrated management of multiple reservoir systems by considering both water quantity and quality problems. It also presents a long-term forecasting technique of reservoir water quality by using the developed phosphorous model. The methodology was applied to the Han river reservoirs operation, in which five major reservoirs were considered. The result shows that the spatially and temporally distributed water quantity and quality resources can be utilized by meeting all the required constraints.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.269-273
• /
• 2008

기상청(KMA, Korea Meteorological Administration)에서는 기상수치예보모델을 적용하여 수치예보를 하고 있으며 전지구 모델로는 GDAPS(Global Date Assimilation and Prediction System)를 지역모델은 RDAPS(Regional Date Assimilation and Prediction System)를 사용하고 있다. 수치예보결과를 이용하여 유출량을 예측할 경우 일반적으로 해상도가 높은 지역모델인 RDAPS의 수치예보 결과값을 사용한다. RDAPS는 00UTC와 12UTC에 3시간으로 누적된 자료를 30km 격자에 대하여 예측시간으로부터 48시간에 대하여 자료를 생성한다. 일강우자료를 입력자료로 사용하는 강우-유출 모형의 경우 3시간 누적 자료를 나타나는 RDAPS 수치예보 결과를 이용 시 3시간 scale에서 일(day)시간 scale로 변환시켜주어야 한다. 본 연구에서는 RDAPS의 수치예보 결과의 일(day)시간 scale 변환 방법에 따른 정확도를 비교하여 RDAPS 수치예보 결과의 일(day)시간 scale 변환에 대한 정확도를 비교하여 일(day)시간 scale 변환에 대한 지침을 제공하고자 한다. RDAPS 수치예보 결과값의 특징을 이용하여 RDAPS 결과값을 일(day)시간 scale로 변환하는 방법으로 총 9개방법을 적용하였으며, 참 값으로는 기상청 강수자료를 사용하였으며, 금강유역을 대상으로 유역평균강수량을 계산하여 각 변환 방법에 따른 정확도를 비교하였다.

• Journal of Technologic Dentistry
• /
• v.36 no.2
• /
• pp.91-96
• /
• 2014

Purpose: The purpose of this study was evaluate the validity of polyurethane model fabricated by intra oral scanning method. Methods: Ten sam cases of stone models were manufactured from master model, and polyurethane models were made with the intra oral scanning and CNC milling method. One examiner individually measured 6 distances(intercanine distance, intermolar distance, two dental arch lengths(right, left) and two diagonal of dental arch lengths(right, left) on the stone models and the polyurethane models. The Mann-Whitney U test(${\alpha}$=0.05) were used for statistical analysis. Results: The mean difference between measurements made directly on the stone models and those made on the polyurethane models was 0.31-0.38mm. No statistically differences between the two groups were founded 4 distances(p>0.05), but 2 distances were statistically significant(p<0.05). Conclusion: Stone models showed larger than polyurethane models fabricated by intra oral scanning method.

• Journal of Korean Society on Water Environment
• /
• v.25 no.3
• /
• pp.375-385
• /
• 2009

The estimation of delivery ratio is a essential part of Korean Total Maximum Daily Loads (TMDL) procedure which needs a number of observed stream flow and pollutants data. If observed data were not sufficient, researchers have to find other alternatives. One of them is to make indirect data by using watershed models, such as Soil and Water Assessment Tool (SWAT) and Hydrological Simulation Program - FORTRAN (HSPF) and so on. In this study, indirect daily data was made by using SWAT model. To build the Byongseong-SWAT model accurately, crop cultures are reflected by handling the MGT.file in SWAT model. Especially, mass of manure and schedule of crop culture are inputted through investigating domestic research papers as well as fieldwork. After calibrating SWAT model in comparison with the 22-years flow and pollutants observed outlet data, the delivery ratio of Byongseong watershed is calculated by using daily simulated data during 2004-2007. Empirical equations for delivery ratio through multi-regression analysis are developed by using meteorological and physical factors such as flow, watershed area, stream length, catchment slope, curve number (CN) and subbasin's pollutant discharge loads.