• Proceedings of the Korea Contents Association Conference
• /
• 2013.05a
• /
• pp.171-172
• /
• 2013

우울은 군대 내 발생되는 극단적인 사고 중 하나인 자살의 주요 원인으로 제시되어 왔다. 본 연구는 군인들의 우울, 불안 및 자아존중감의 수준을 파악하고, 우울의 영향요인을 탐색하고 이들을 예측하는데 주로 사용해 왔던 다중회귀분석 방법과 효과적인 의사결정방법으로 알려진 회귀나무모형의 효과성을 비교해보고자 하였다. 방법: 횡단적 조사연구이며, 우울측정에는 CES-D, 불안측정은 SAI, 자아존중감은 Rosenberg(1965)의 도구를 사용하였다. 연구대상자는 강원도 전방 부대 근무 중인 군인이며, 534부가 회수되었다. SPSS/WIN 18.0을 이용하여 위계적 다중회귀분석과 회귀나무모형을 실시하였다. 결과: 대상자들의 우울, 불안 및 자아존중감의 정도는 각각 $10.7({\pm}9.8)$, $38.5({\pm}10.2)$과 $31.7({\pm}5.2)$이었다. 대상자의 23.6%(126명)가 경한 우울을 나타내었다. 다중회귀분석에 의한 우울 영향요인은 불안, 자아존중감과 복무기간이었으며, 우울에 대하여 62.0%의 설명력을 가지고 있었다. 또한 회귀나무모형에서는 높은 불안과 불안이 다소 낮더라도 전역 후 진로가 불확실한 집단이 우울 위험군일 것으로 예측되었다. 결론: 본 연구 대상자들의 우울의 주요 영향요인은 불안으로 나타났다. 군대 내에서 적용할 수 있는 불안 조절 방법 개발이 필요할 것으로 보인다. 또한 일부 요인에서 차이가 있어, 반복 연구가 필요하지만, 주요 변인인 불안을 예측했다는 점에서 보면 다중회귀분석과 회귀나무모형은 군인들의 우울을 예측에 유용한 방법으로 보인다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.2
• /
• pp.69-74
• /
• 2015

In this work, we studied the shell and helically coiled tube heat exchangers. Shell and coil heat exchangers with different rate of water flow and plate heat exchanger with same capacity were tested for condensing conditions. We proposed design guide using modified Wilson plot method. We compared fouling characteristics between shell and coil heat exchanger and plate heat exchanger, when they were washed and were not washed. The shell and coil heat exchanger showed 120% of higher saturated fouling resistance value and 4% of better heat transfer ratio than the plate heat exchanger.

• Journal of Korean Medical classics
• /
• v.28 no.2
• /
• pp.87-102
• /
• 2015

Objectives : I intended to find out the origin and development of symptom discrimination based on theory of triple energizers before Tang Dynasty(唐代). Methods : I extracted the topic-related contents from books in this era. After arraying them in a chronological order, I analyzed the materials. Results : The author in Zhong Zang Jing(中藏經) first mentioned that symptom of Huo Luan(霍亂) was deeply related with triple energizers. Ge Hong(葛洪) did not only come out with some symptoms and mechanisms for Shang Han(傷寒) and Za Bing(雜病), but also applied them to their usages for herb medicine. Chao Yuan Fang(巢元方) suggested its symptoms were more closely related with Shang Han and Za Bing than before. For the first time, Chao subdivided its symptoms to both cold-heat and weakness-strength sides. Sun Sai Miao(孫思邈) supplemented its discrimination invented by Chao(巢元方), adding more symptoms and prescriptions for triple energizers. Wang Tao(王燾) showed more prescriptions for triple energizers than before, and initially designed the discrimination for Huo Luan, diabetes(消渴), and epidemic Wen Bing(溫病). Conclusions : Before Tang dynasty, the symptom discrimination based on theory of triple energizers had been originated and developed for the purpose of repairing Za Bing, not just treating Wen Bing.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.187-196
• /
• 2009

The foot type is classified into normal, high or low arch according to either foot print or medial longitudinal arch (MLA) height. Plantar fasciitis, heel pain, Achilles tendinitis, stress fracture, metatarsalgia, knee pain, shin splint pain, and etc are common foot disorders and associate to the foot type. The purpose of this study was to evaluate several suggested bony inclination used to classified the abnormal foot and if the arch index (AI) was correlated with foot morphology. Lateral view and dorso-plantar view of radiographic images and flatbed scanner measurements obtained from 57 college students were analyzed. Results showed that AI measured in this study was higher than Caucasian Americans and European, but similar with African. The ethnic origin could influent the AI distribution. The AI provided a simple quantitative means of assessing the structure of lateral and medial longitudinal arches. The correlation coefficients of true bone height with AI could be further improved by normalized foot width rather than foot length. AI also demonstrated as a good indicator of inclination between calcaneus-fifth metatarsal (CalM5) and calcaneus-first metatarsal (CalX), it is a good means to classify the foot type.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.11
• /
• pp.726-732
• /
• 2011

The aerodynamic and aeroacoustic performance of discharge grille of outdoor unit of air-conditioner was investigated in this study. Discharge grille is one of outdoor unit's important parts to affect the flow rate and Overall Sound Pressure Level(OSPL). New type of discharge grille was suggested based on the results of numerical simulation. To simulate the flow pattern near the propeller fan, commercial flow solver FLUENT was used. Sliding mesh method was used for rotating propeller fan and initial condition for unsteady model was calculated by Multiple Reference Frame(MRF) method. To minimize the interaction noise between fan blade wake and discharge grille, new discharge grille has radial rib which is aligned with trailing edge of fan blade. And inclined radial rib was adopted for reducing flow rate drop in discharge grille. The optimization of inclined angle of radial grille was performed experimentally.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.3 no.1
• /
• pp.8-16
• /
• 2015

In the later quarter of the twentieth century, the need for foreign capital is realized among the various countries of the world. Developing countries especially developed multi-pronged strategies to attract foreign capital into the country. One such strategy is the adoption of liberalization policy. Almost all the developing countries started opening their economy, out of the compulsion, to achieve faster rate of economic growth and development. Even a communist country like China adopted liberalization policy as a strategy for accelerated economic growth during 1979. India also joined the race by 1991, when the government announced the policy of liberalization. The importance of FDI extends beyond the financial capital that flows into the country. The huge size of the market in this sector and high returns on investment are two important factors in boosting FDI inflows to power sector. 100 percent FDI is allowed under automatic route in almost all the sub sectors of power sector except the atomic energy. Major foreign investment is made in this sector during 2000 to 2009 is Mauritius with an investment of US$ 4490.96 i.e., 4.24 percent of the total FDI inflows into the country during the period. The estimation of future FDI flow shows a marginal decline in the year 2010. Then from 2011 to 2015 onwards upward trend of FDI was observed.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.395-404
• /
• 2016

A 6-bit 3.4 GS/s flash ADC in a 65 nm CMOS process is reported along with the proposed 4x time-domain interpolation technique which allows the reduction of the number of comparators from the conventional $2^N-1$ to $2^{N-2}$ in a N-bit flash ADC. The proposed scheme effectively achieves a 4x interpolation factor with simple SR-latches without extra clocking and calibration hardware overhead in the interpolated stage where only offset between the $2^{N-2}$ comparators needs to be calibrated. The offset in SR-latches is within ${\pm}0.5$ LSB in the reported ADC under a wide range of process, voltage supply, and temperature (PVT). The design considerations of the proposed technique are detailed in this paper. The prototype achieves 3.4 GS/s with 5.4-bit ENOB at Nyquist and consumes 12.6 mW power at 1 V supply, yielding a Walden FoM of 89 fJ/conversion-step.

• Structural Engineering and Mechanics
• /
• v.62 no.4
• /
• pp.443-453
• /
• 2017

The performance of bolted side-plated (BSP) beams is affected by the degree of transverse partial interaction, which is a result of the interfacial slip caused by transverse shear transfer between the bolted steel plates and the reinforced concrete beams. However, explicit formulae for the transverse shear transfer profile have yet to be derived. In this paper, a simplified piecewise linear shear transfer model was proposed based on force superposition principle and simplification of shear transfer profiles derived from a previous numerical study. The magnitude of shear transfer was determined by force equilibrium and displacement compatibility condition. A set of design formulae for BSP beams under several basic load cases was also derived. Then the model was verified by test results. A worked example was also provided to illustrate the application of the proposed design formulae. This paper sheds some light on the shear force transfer mechanism of anchor bolts in BSP beams, and offers a practical method to evaluate the influence of transverse partial interaction in strengthening design.

• Journal of Plant Biology
• /
• v.16 no.1_2
• /
• pp.1-5
• /
• 1973

Six young trees of Alnus tinctoria grown in isolation, each having different growing stage, were selected and the surface area of their roots, stems and leaves was determined. Each of the roots of more than 0.2mm in diameter and stems was cut at intervals of 10cm and their surface area was calculated with 2$\pi$rl from the average diameter (2r) of both sections (upper and lower) by making cylindrical estimation of the cut pieces. The leaf area measured was only one side area, and the volume of cut piece and amount of dry matter of each organ were also measured. The percentage to the surface area of the whole plant body by each organ was 4-12% in root, 7-9% in stem and 69-89% in leaf, respectively. There was relatively a little individual difference. However, the surface area ratios of root and stem showed a slightly increasing tendency while that of leaf decreasing according to the growing stage. The ratio of sum leaf area index (LAIi) was 2.3-4.0$m^2$/$m^2$-and that of the surface area index(SaIi) was 0.16-0.33$m^2$/$m^2$, respectively. It has been known that the stem surface area(SAI) to the leaf area index(LAI) is within the range of 31-53%, but the SAIi is within the range of 8-11% of the LAIi.

• Computers and Concrete
• /
• v.20 no.4
• /
• pp.461-468
• /
• 2017

With the increasing demand in the production of concrete, there is a need for adopting a feasible, economical and sustainable technique to fulfill practical requirements. Self-Compacting Concrete (SCC) is one such technique which addresses the concrete industry in providing eco-friendly and cost effective concrete. The objective of the present study is to develop a mix design for SCC with Crushed Rock Fines (CRF) as fine aggregate based on the plastic viscosity of the mix and validate the same for its fresh and hardened properties. Effect of plastic viscosity on the fresh and hardened properties of SCC is also addressed in the present study. SCC mixes are made with binary and ternary blends of Fly Ash (FA) and Ground Granulated Blast Slag (GGBS) with varying percentages as a partial replacement to Ordinary Portland Cement (OPC). The proposed mix design is validated successfully with the experimental investigations. The results obtained, indicated that the fresh properties are best achieved for SCC mix with ternary blend followed by binary blend with GGBS, Fly Ash and mix with pure OPC. It is also observed that the replacement of sand with 100% CRF resulted in a workable and cohesive mix.