• Safe Food
• /
• v.6 no.2
• /
• pp.34-39
• /
• 2011

• Safe Food
• /
• v.5 no.2
• /
• pp.14-19
• /
• 2010

• Safe Food
• /
• v.6 no.4
• /
• pp.3-12
• /
• 2011

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.1
• /
• pp.40-46
• /
• 2015

Arctic Ocean has rapidly melted due to global warming, by this, commercial ship has been operating through the area. Reason to develop the Northern Sea Route(NSR) even in extreme conditions, the distance than the existing route is shortened, which bring economic benefits. For these reason, the International Maritime Organization(IMO) established safety standards of the Arctic navigation(Polar Code) in order to ensure safe operation in the Northern Sea Route. In this study, it has been described ice types and safety standards of Artic vessel what officer needs to know for safe navigation on the Arctic Ocean. And It was verified by simulation the theoretical knowledge for the safe operation of the Arctic vessel. As a result, it was found that ship needs to reduce speed and analyze ice for safe operation before enter into the ice, it is necessary to enter at right angle to break ice safety and efficiently. Also according to the result of the simulation of navigation entering in ice channel(Lead), it was difficult to change course, it is believed that require emergency training for passing Vessel. In the future, It shall be analyzed precisely under various conditions of scenario.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.4
• /
• pp.309-316
• /
• 2020

Waterway design should prioritize appropriate channel width to ensure preferential safe passage for the arrival and departure of vessels. To calculate the minimum channel width required for safe passage a comprehensive review of several factors is required. These factors include vessel maneuverability, determined by vessel size, type and speed; environmental factors such as wind, tide, and wave action; human factors, including personal experience and operator judgment as well as marine traffic and navigation support facilities for decision making. However, the Korean channel width design standard is based only on vessel length, and requires improvement when compared with the standards of PIANC, USA, and Japan. This study aims to estimate the appropriate channel width required for one-way traffic in a straight channel, considering various vessel and environmental factors, using Fast Time Simulation (FTS). When the wind speed is 25 knots, with a current speed of 2 knots and a normal vessel speed of 10 knots FTS shows that a 150K GT Cruise Ship requires a minimum channel width of 0.67-0.91 the vessel length (L), whereas a 120K TEU Container Ship and a 300K DWT VLCC require 0.79-1.17 and 1.02-1.59, respectively. Such results can be used to calculate the minimum channel width required for safe passage as an improved Korean design standard.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.05a
• /
• pp.137-140
• /
• 2006

As underground construction is a large component of the cost of construction and a term of works in Top-Down construction, it is important to reduce the term of works in underground construction. The purpose of this study is to analyse buckling stress and load of prefounded columns as the process of excavation is changed, and propose a suitable process of excavation to increase the speed of works. When several floors are excavated, the valid buckling length of profounded column is increase and allowable buckling stress is decreased. The result shows that all columns are safe in buckling down to B3th story whether 2 stories or 3 stories are excavated straightly. However, several columns are not safe from B4th story when 2 or 3 stories are excavated straightly. With these results, a process can be designed that first B3 stories are excavated straightly, and then excavate B4th story putting concrete on B1st and B2nd story.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.877-880
• /
• 2017

Impeller blades in the centrifugal compressor are subjected to static loads due to the high-speed rotation and steady aerodynamic forces. At the same time, aerodynamic excitations by the interaction between the impeller and the diffuser vanes(DV) periodically excite the impeller blades in resonant conditions, which may lead to high cycle fatigue (HCF) and eventually result in failure of the blades. In order to predict the structural response accurately, the aerodynamic excitation and the major resonant conditions were predicted by performing the unsteady flow analysis and modal analysis using ANSYS. Next, a unidirectional forced vibration analysis was performed by using fluid-structure interaction (FSI) method, and the safety of HCF was evaluated based on the results.

• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.10-19
• /
• 2014

We designed bearingless rotor hub system which replace mechanical hinge/bearing with composite beam component and conducted fatigue analysis for flexbeam and torque tube. Extension/bending/torsional stiffness was calculated from 2D section analysis using VABS and 2D section structure analysis was applied for strain calculation. S-N curve of each composite material was generated using Wohler equation and fatigue analysis was conducted on weakness section which was decided from static structure analysis. CAMRAD II was used for load analysis and load analysis result was applied HELIX/FELIX standard load spectrum to generate bearingless rotor system load spectrum which was used fatigue safe life analysis.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.2
• /
• pp.99-105
• /
• 1983

In the Steering and Sailing Rules of International Regulations for Preventing Collicions at Sea, 1972, any relative distance between two vessels necessary for taking action to avoid collision in head-on situation is not referred. In this paper, the author analyzed the ship's collision avoiding actions from a viewpoint of ship motions and worked out mathematical formulas to calculate the relative distances necessary for collision avoiding actions. Figuring out the values of maneuvering indices through experiments of actual ships, the author applied these values to the calculationg formulas and calculated the minimum safe relative distances. On the assumption that two vessels same in size and condition are approaching each other in head-on situation, the minimum safe relative distance was calculated as 5.0 times, sufficient safe relative one as 10.0 times their own length.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.5
• /
• pp.476-482
• /
• 2013

This study aims to enhance the effectivity of VTS(Vessel Traffic Service) control by investigating the minimum safe distance between vessel and vessel, vessel and land(obstacle) for the vessel's safe navigation within the VTS control area. In addition, to suggest basic data for the safe navigation, this study has done survey and analysis to each VTS center, and individual on the minimum safe distance to VTS operators of each ports of korea. Through ocean voyage by training ship, Singapore and Malacca strait's congested vessel traffic zone's control distance was compared and investigated the difference on safe distance by the different VTS operators. As a result, there was huge difference of minimum safe distance between the VTS operators belong to the same center. Over all, the port with gentle coastline, like donghae, the safe distance was wider than the other port. On the other hand, port with complex coastline and frequent entry and departure of the vessel, like mokpo, the safe distance was the shortest of all. Therefore, development of module suitable to port's natural conditions and traffic volume's necessity is required, for the operators affiliated to the same VTS center control according to formal method. Lastly, the full discussion by the expert group about establishment of standard control procedure in the future should be considered as well.