• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.9
• /
• pp.716-723
• /
• 2014

Vibration measurement using image processing is a fully non-contact measurement method and has many application fields. The resolution of vibration data measured by image processing depends on the camera performance and is lower than that measured by accelerometers. This work discusses the method to increase resolution of vibration signal measured by image processing based on the image mosaic technique with a high-power lens. The working principle of resolution enhancement was explained theoretically and verified by several experiments. It was shown that the proposed method can measure vibrations of relatively large scale structures with increased resolutions.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.39-45
• /
• 2012

For a fundamental study for high concentration pigment coating, the effects of alkali swellable emulsion (ASE) type rheology modifier and surface adsorption emulsion (SAE) type rheology modifier on both the stability and the viscoelastic behavior of a coating color were elucidated. The coating color prepared with SAE type rheology modifier showed superior thermal and mechanical stability than that with ASE type. In the high concentration and high speed coating process, the mechanical stability of a coating color was a key parameter since both impact force and shear force were increased with the increase of coating color concentration and coating speed, respectively.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.785-788
• /
• 2012

본 논문에서는 접착제로 접합된 DCB 구조체의 피로 해석을 수행하였다. 두께가 25및 40 mm인 두 모델들의 피로수명과 피로손상의 해석 결과를 비교해보면, 두께 25 mm인 모델이 두께 40 mm인 모델에 비하여 수명과 손상이 불리한 것으로 나타났으며 불규칙 피로하중에서는 'SAE transmission'에서 가장 불리한 값을 나타냈다. 또한 'SAE transmission'에서 가장 안정한 경향을 보이고 있고 상대적인 손상으로서 약 1.1에서 1.8 % 정도로 가장 작은 것으로 나타났다. 본 연구에서 얻어진 해석 결과를 접착제로 접합된 실제 복합재 구조물에 적용시켜 피로거동을 분석하고 그 기계적인 특성을 파악할 수 있다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.350-353
• /
• 2006

We enhance the stability of SaeManGeum Drainage Sluice Gate Bridge. We prevent a destruction disaster of it. We extend the life cycle of it. So We have developed the safety control system to manage the facility of bridge to the continuance. In this study, sensitive sensor and measuring instrument has been taken to consider the characteristic of the box-girder type concrete bridge. And CDMA type has adapted for wireless communication. Control program has been developed on web base. In this program, the advanced systems have applied like this; the setup of control range for management from the statistical analysis, the evaluation system for force and deformation and the control system for a heavy vehicle permit.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.917-921
• /
• 1991

Hydraulic fitting impulse tester is equipment which produce impulse pressure waveform that specified foreign standard of SAE, JIS etc. Test conditions of SAE J1453 about waveform standard indicates frequency of 35-70 cycle/min, pressure of 560 bar, oil temperature of 93 .+-.3.deg. C etc. and required cycle is a million over. In additions, Test condition operated continuously equipment. This development item adopted new pattern method such as intensifier and rotary distributor is different from already established fitting impulse tester applied servo valve and high pressure direct directional control valve. Therefore, this development item which compares already established item is good reliability, low cost of manufacture and save of electric energy. especially, Domestic small and medium enterprise uses this tester because of economical cause. We develope appropriateness tester which conforms to demand of user.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.2
• /
• pp.199-205
• /
• 2013

Stress and deformation on forklift happened at loading, unloading or moving freight are studied by structural and fatigue analysis in this study. As model 1 as closing type between forks has lower stress and stain than model 2 at opening type, model 1 has more durability than model 2. Among the cases of nonuniform fatigue loads, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. In case of 'SAE bracket history' with the severest change of load at model 1 and 2, maximum life is shown with Cycle. Minimum damage with 854 at model 2 becomes much higher than model 1. As the gap between forks becomes open, the damage probability becomes higher. The structural result of this study can be effectively utilized with the safe and stable design of forklift by investigating prevention and durability against its damage.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.6
• /
• pp.731-739
• /
• 2006

Corrosion and lassitude are very important in the metal construction Currently, the shot peening is used much for removing the defect on the surface, improving the fatigue strength on surface. In this study. the influence of shot peening to the corrosion property were investigated in 3.5% NaCl, 10% HNO3 + 3% HF. 6% FeC13. The immersion test was performed on two kind of specimen(Removed corrosion product. RCP and Continuous immersed specimen: CIS). The immersion periods was 3600hours. Corrosion potential. weight loss, and fatigue crack growth characteristics were investigated. The result, shot peening in corrosion potential showed stable potential. Also, shot peening displayed small Weight loss than un peening. And Fatigue crack resistivity of shot peening in corrosion solution's fatigue crack appeared greatly than un peening.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.2
• /
• pp.201-206
• /
• 2009

This study investigates fatigue life and possibility damaged at disk brake of automobile by the simulation of fatigue analysis. Among nonconstant fatigue loads, the case of 'SAE Bracket History' which is the severest at the variation of load tends to be most unstable. The case of 'Sample History' which becomes slower at the variation of load tends to be most stable. The value of maximum relative damage in case of 'SAE Bracket History' is occurred near the average stress '0' and this case can be shown to have the possibility to affect more damage than another case. As the result of this study is applied to automobile parts with non constant loads, durability can be improved during drive by preventing any damage.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1394-1400
• /
• 2008

This study investigates the Failure Modes, Effects and Criticality Analysis (FMECA) Method for the railroad vehicle. Recently, RAMS (Reliability, Availability, Maintainability and Safety) is one of the most important issues in the railroad industry. FMECA is prerequisite for the RAMS Analysis, and it is a procedure to identify the potential failure modes and their effects and to reduce or mitigate the critical effects on the system. FMECA is used in various industries and it is specialized in each industry. For instance, MIL-1629a and SAE-J1739 are specialized FMECA method for Military industry and Automotive industry, respectively. Although the railroad industry requires the high reliability system, it does not have a specialized FMECA yet. Thus, in this paper, an FMECA method specialized to the railroad vehicle was proposed through analyses and comparison of the MIL-1629a, SAE-J1739 and IEC-60812 standards.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.10
• /
• pp.817-824
• /
• 2014

Accelerometer and laser vibrometers are widely used to measure vibration of structures like a building or piping. Recently, the research measuring vibration by using camera image is introduced. However, this method has a disadvantage. If camera moves by the vibration cannot measure the vibration displacement of structure. We proposed the enhanced technique for measuring vibration using camera. This paper took the experiment for correction of error due to camera shaking. We verified through an experiment. And the accuracy of the method measuring the vibration displacement by using the camera images was analyzed.