• 대한기계학회논문집A
• /
• 제25권3호
• /
• pp.470-477
• /
• 2001

Constant ΔK fatigue crack growth tests were performed by applying an intermediate multiple overload for S45C steel. The purpose of the present study is to investigate effects of specimen thickness at various baseline stress intensity factor range levels (ΔK(sub)b), overload application position (a/W) and overload application frequency (OL(sub)HZ) on fatigue crack growth retardation behavior. The principal results are summarized as follows. The amount of retardation for a given ΔK(sub)b level is increased with increasing the baseline stress intensity factor range level for all specimen thickness. The normalized minimum crack growth rate is increased with increasing the specimen thickness, except for ΔK=45MPa√m. The retardation cycle is decreased with increasing a/W and increased with OL(sub)HZ.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 2001년도 추계학술대회 및 정기총회
• /
• pp.88-88
• /
• 2001

The effects of pH and temperature on the degradation of prokidn in various buffered aqueous solutions(pH 1.32~9.66) and temperatures (35, 45 and 6$0^{\circ}C$ were investigated. The effect of ionic strength on the degradation of prokidin was also measured by varying ionic strength (0.0466~1.5) at pH 1.35 and 45$^{\circ}C$ The effect of metal ions on the degradation of prokidin at pH 7.35 and 3.98 was observed. The degradation of prokidin followed the pseudo- first- order kinetics. The degradation rate of prokidin showed pH-dependent and temperature-dependent patterns. Prokidin was very stable at the pH below 3.95, where half-lives at 35, 45 and 6$0^{\circ}C$were 294, 206 and 107 day, respectively. However, it degraded very rapidly at pH above 6.49; the half-lives at 35, 45 and 6$0^{\circ}C$were 60, 25 and 13 day, respectively. As ionic strength increased, the degradation rate of prokidin increased. Some metal ions increased the degradation rate in the rank order of Mn > Fe > Cu >Fe On the other hand. other metal ions such as Bi, Ba. Zn, Ni, Co did not show unfavorable effect.

• 한국해양공학회지
• /
• 제32권6호
• /
• pp.502-510
• /
• 2018

In order to accumulate data to lower the friction coefficient of a press mold, tribological tests were performed before and after coating SM45C with a PVC/PO film and plasma coating (CrN, concept). The ultrasonic nanocrystal surface modification (UNSM)-treated material had a nano-size surface texture, high surface hardness, and large and deep compressive residual stress formation. Even when the load was doubled, the small amount of abrasion, small weight of the abrasion, and width and depth of the abrasion did not increase as much as those of untreated materials. A comparison of the weight change before and after the tribological test with the CrN and the concept coating material and that of the untreated material showed that the wear loss of the concept coating material and P-UNSM treated material (that is, the UNSM treated material treated with the concept coating) showed a tendency to decrease by approximately 55-75%. Concept 100N had a lower friction coefficient of about 0.6, and P-UNSM-30-100N showed almost the same curve as concept 100N and had a low coefficient of friction of about 0.6. The concept multilayer coating had a thickness of $5.32{\mu}m$. In the beginning, the coefficient of friction decreased because of the plasma coating, but it started to increase from about 250-300 s. After about 350 s, the coefficient of friction tended to approach the friction coefficient of the SM45C base metal. The SGV-280F film-attached test specimen was slightly pushed back and forth, but the SM45C base material was not exposed due to abrasion. The friction coefficient was 0.22, which was the lowest, and the tribological property was the best in this study.

• Structural Engineering and Mechanics
• /
• 제51권1호
• /
• pp.111-130
• /
• 2014

The aim of this study is to investigate the effects of the beam aspect ratio(L/h), hole diameter, hole location and stacking layer sequence ($[0/45/-45/90]_s$, $[45/0/-45/90]_s$ and $[90/45/-45/0]_s$) on natural frequencies of glass/epoxy perforated beams under room and high (40, 60, 80, and $100^{\circ}C$) temperatures for the common clamped-free boundary conditions (cantilever beam). The first three out of plane bending free vibration of symmetric laminated beams is studied by Timoshenko's first order shear deformation theory. For the numerical analyses, ANSYS 13.0 software package is utilized. The results show that the hole diameter, stacking layer sequence and hole location have important effect especially on the second and third mode natural frequency values for the short beams and the high temperatures affects the natural frequency values significantly. The results are presented in tabular and graphical form.

• Composites Research
• /
• 제12권1호
• /
• pp.28-36
• /
• 1999

본 연구에서는 얇은 탄소섬유/에폭시 복합적층판(두께 1mm)의 냉각열응력으로 인한 자유경계단 근처의 파손을 유한요소 수치해석과 초음파 C-scan, 광학 및 전자현미경 관찰을 통하여 검토하였다. 수치해석 결과, 복합적층판의 자유단 근처의 내부층에서 층냄 및 층간응력이 크게 나타났다. 액체질소에 의한 저온담금질 실험결과, 적층강도가 $[0_2/90_2]_s,\;[45_2/-45_0]_s,\;[0_2/60_2]_s$인 적층판의 층간근처의 내부층 쪽에서만 모재 및 계면부에서 진전하는 층내균열이 발생하였다. 이들 결과는 위의 수치해석 결과와 일치했다.

• 한국수산과학회지
• /
• 제28권2호
• /
• pp.183-193
• /
• 1995

본 연구에서는 그물을 그것의 영역권 내로 물을 유입한 후 영역권 밖으로 투과시키는 하나의 유공성 구조물로 간주하고, 벽 면적이 S되는 그물이 유속 v에서 받는 저항 R을 $R=kSv^2$으로 취하여, 레이놀즈수를 $R_e$, 그물 입구의 단면적을 $S_m$, 흐름에 수직인 평면에 대한 그물의 총 투영면적을 $S_m$이라 할 때 저항계수 k를 $$k=c\;Re^{-m}(\frac{S_n}{S_m})n(\frac{S_n}{S})$$으로 표시한 후, 지금까지 행해진 평면 그물감에 대한 저항 실험 결과들을 이용하여 이 식의 타당성과 각계수 값을 함께 조사하였다. 조사 결과, 발의 지름이 d, 그물코의 크기가 21, 전개각이 $2\varphi$ 그물감의 $R_e$에 관한 대표치수를 그물코의 면적에 대한 발의 체적의 비 $\lambda$, 즉 $$\lambda={\frac{\pi\;d^2}{21\;sin\;2\varphi}$$로 택하였을 때, c와 m의 값은 각각 $240(kg\;\cdot\;sec^2/m^4)$ 및 0.1로 일정해졌고, n의 합은 1.2로서 1.0보다 컸기 때문에 매듭과 발에서 생기는 반류가 그물코 속으로의 물의 투과를 나쁘게 하여 저항을 증대시킨다는 것을 알 수 있었다. 반면, $R_e$가 커서 그 영향이 무시되는 경우는 $cR_e\;^{-m}$의 값이 상수가 되는데, 그 값은 흐름에 대한 그물감의 영각 $\theta$가 $ 45^{\circ}<\theta\leq90^{\circ}$의 구간에 있을 때 100$(kg\cdot sec^2/m^4)$으로 주어졌고, $ 0^{\circ}<\theta\leq45^{\circ}$의 구간에 있을 때는 후류의 영향 때문에 $100(S_m/S)^{0.6}\;(kg\cdot\;sec^2/m^4)$으로 주어 졌다. 그런데, 평면 그물감에 대 한 $S_m$ 및 $S_n$의 값은 각각 $$S_m=S\;sin\theta$$ 및 $$S_n=\frac{d}{I}\;\cdot\;\frac{\sqrt{1-cos^2\varphi cos^2\theta}} {sin\varphi\;cos\varphi} \cdot S$$로 주어지므로, 이들과 상기 c, m 및 n 값을 이용하면 평면 그물감의 저항계수 k가 구해지는데, $\theta=0^{\circ}$인 경우는 저항 특성 자체가 변하여 k가 그물감 표면의 조도에 따라 달라졌으므로 $$k=9(\frac{d}{I\;cos\varphi})^{0.8}$$으로 주어졌다. 그러나, 이상의 결과를 실제 그물에 적용할 때는 $\theta=0^{\circ}$ 때의 것은 고려하지 않아도 되고, 전기한 c 및 m 값도 불충분한 자료에 의한 것들이기 때문에 $R_e$의 영향이 무시되는 경우의 것만을 이용하면, 그물 각부의 $\theta$가 $45^{\circ}<\theta\leq90^{\circ}$의 구간 또는 $0^{\circ}<\theta\leq45^{\circ}$의 구간에 들어오는 그물의 저항계수 $k(kg\cdot sec^2/m^4)$는 $$k=100(\frac{S_n}{S_m})^{1.2}\;(\frac{S_m}{S})$$ 또는 $$k=100(\frac{S_n}{S_m})^{1.2}\;(\frac{S_m}{S})^{1.6}$$으로 주어진다는 것을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제20권12호
• /
• pp.3899-3908
• /
• 1996

In order to clarify the effects of nonmetallic inclusion contents insteels (SM45C & SCM440) on the tool life, cutting experiment was performed under various cutting conditions. Tool life, cutting force, roughness of machined surface and cutting mechanism are examined on these two kinds of steel. The following conclusions were obtained from the analysis (1) Cutting force of the steels was not affected by chemical component and nonmetallic inclusion. (2) If the rate of amount, Ca/S has a value grater than about 0.2 and addition of less amount of Al, Mn, tool wear of tips decreasesinturning. (3) It is also proved that higher contents of nonmetallic inclusion improve roughness of the surface. (4) Less amount of Ca, higher amount of S, Mn and Al improve the chip breakability.

• 한국세라믹학회지
• /
• 제45권5호
• /
• pp.303-308
• /
• 2008

Mullite precursors were synthesized with aluminosilicate gels from mixture of aluminum nitrate and sodium orthosilicate by the geopolymer technique at ambient temperature. Then, the gel was heat-treated in air up to $1200^{\circ}C$ at intervals of $100^{\circ}C$. Raw and heat-treated gels were characterized by TG-DTA, XRD, FTIR, $^{29}Si$ MAS-NMR, TEM. The result to examine the crystallization of behavior though DTA, the synthesized precursors were crystallized in the temperature range from $950^{\circ}C$ to $1050^{\circ}C$. The XRD results showed that the gel compositions were begun to crystallize at various temperature. Also, it was found that the precursors of M-4 begun to crystallize at about $950^{\circ}C$. The M-4 XRD peaks were characterized better than $M-1{\sim}M-3$ at $1000^{\circ}C$. The formation temperature of mullite in this study is much lower than that of previous sol-gel methods, which crystallized at up of $1200^{\circ}C$. TEM investigations revealed that the sample with 10 nm particle size was obtained via heat-treated at $1000^{\circ}C$ for M-4.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.158-162
• /
• 2003

A study on friction welding of chrome molybedenum steel(SCM440) to carbon steel(S45C) is examined experimentally through tensile test, hardness test. So, this paper deals with optimizing the welding conditions and analyzing various mechanical properties about friction welds of SCM440 to S45C steel. The tensile strength of the friction welded joint was increased up to 100% of the S45C base matal under the condition of all heating time. Optimal welding conditions were n=2,000(rpm), $P_{1}=60(MPa)$, $P_{2}=100(MPa)$, $t_{1}=4(s)$, $t_{2}=5(s)$ when the total upset length is 5.7(mm).

• 대한수학회지
• /
• 제45권5호
• /
• pp.1417-1425
• /
• 2008

In this paper we consider the solvability and describe the set of the solutions of the operator equations $AX+X^{*}C=B$ and $AXB+B^{*}X^{*}A^{*}=C$. This generalizes the results of D. S. Djordjevic [Explicit solution of the operator equation $A^{*}X+X^{*}$A=B, J. Comput. Appl. Math. 200(2007), 701-704].