• 생물환경조절학회지
• /
• 제25권3호
• /
• pp.153-161
• /
• 2016

본 연구는 딸기 '매향' 품종의 과실을 수확 한 후 LPE 용액에 침지처리 한 뒤 저장기간 동안 당도, 색도, 경도 및 생체중 변화를 조사하여 적정 LPE 처리 농도 및 적정 숙도를 구명하고자 실시하였다. 숙도 70%인 과실을 LPE 0(증류수, 대조구), 10, 50, $100mg{\cdot}L^{-1}$ 농도에 1분간 침지하거나, 딸기 꼭지에서부터 익은 비율로 숙도 0%, 50%, 70%, 100%로 등급화한 후에 LPE 0(증류수, 대조구), 2.5, 5, 10, $25mg{\cdot}L^{-1}$ 농도에 1분간 침지한 후 실온($20^{\circ}C{\pm}1$)에서 40분간 자연건조 한 뒤 $4^{\circ}C$ 저장고에 12일간 저장하였다. 저장 기간 동안 생체중, 종경도, 횡경도, 색도 및 당도 변화를 조사하였다. 숙도 70% 과실을 수확 후 LPE 0, 10, 50, $100mg{\cdot}L^{-1}$ 농도에 침지 후 저장하며 과실의 생체중을 측정하였을 때 처리 농도별 유의차가 없었다. 종경도는 저장 3일째에는 무처리구와 LPE $10mg{\cdot}L^{-1}$ 처리구에서 가장 높았다. 저장 6일째부터 12일까지는 $10mg{\cdot}L^{-1}$ 처리구에서 가장 높았다. 횡경도는 저장 9일째 10과 $50mg{\cdot}L^{-1}$에서 가장 높게 측정되었으나 12일째에는 $10mg{\cdot}L^{-1}$ 처리구는 무처리구와 차이가 없었고 50과 $100mg{\cdot}L^{-1}$에서 가장 낮았다. 색차계 $L^*$과 $b^*$ 값은 LPE 처리 농도별 저장 기간 별유의차가 없었고, $a^*$ 값은 저장 12일째에 LPE $10mg{\cdot}L^{-1}$ 처리를 포함한 모든 농도에서 무처리구에 비하여 높았다. 숙도 0%, 50%, 70%, 100%로 등급화한 후에 LPE 0(증류수, 대조구), 2.5, 5, 10, $25mg{\cdot}L^{-1}$ 농도에 침지한 후 저장하였을 때 과실 생체중은 LPE 처리농도별 유의차가 없었다. 종경도와 횡경도는 LPE 처리농도와 상관없이 숙도 0% >50%> 70%> 100% 순으로 높았다. LPE 농도 처리에 의한 영향은 종경도는 숙도 70% 과실의 경우 저장 3, 6, 12일째 모두 LPE $5mg{\cdot}L^{-1}$에서 가장 높았고 12일째는 LPE 처리구 모두 무처리구에 비해 높았다. 숙도 100% 과실의 경우 저장 12일째에 LPE $10mg{\cdot}L^{-1}$에서 종경도가 무처리구에 비해 높았지만 $25mg{\cdot}L^{-1}$에서는 종경도 및 횡경도 모두 가장 낮았다. 색차계 L, b 값은 LPE 처리와 관계없이 숙도 0% > 50% > 70% > 100% 순으로 높아 숙도에 따라 유의차가 있었다. 숙도100%에서 가장 낮은 $L^*$과 $b^*$값이 측정되었다. 숙도 50%와 70% 과실의 경우 저장기간 중 다른 처리구에 비해 $5mg{\cdot}L^{-1}$에서 $L^*$, $b^*$ 값이 가장 높았다. 숙도 100%의 경우 $25mg{\cdot}L^{-1}$에서는 가장 낮은 값을 보여 과숙이 유발된 것으로 판단된다. 색차계 $a^*$ 값은 $L^*$과 $b^*$와는 반대로 그 값의 증가는 숙도가 높음을 의미하는 것으로 숙도 0, 50, 70, 100% 모두에서 LPE 처리 효과를 구분할 수 없었고, 당도는 처리별, 기간별 유의차가 없었다. 결론적으로, LPE는 저장 중인 딸기 과실의 생체중에 영향을 주지 않으면서 경도 및 색도 변화에는 영향을 주는 것을 알 수 있다. 숙도 70% 과실은 타 숙도에 비해 저장성 증대효과가 크며, 숙도 70%일때 처리농도 LPE $5mg{\cdot}L^{-1}$에서 저장성 증대에 효과적 이였다.

• Tuberculosis and Respiratory Diseases
• /
• 제42권6호
• /
• pp.923-933
• /
• 1995

연구배경: 석면분진의 흡입으로 인한 호흡기 변화중 가장 조기에 그리고 가장 빈번하게 발견되는 것은 늑막 변화이다. 늑막변화에는 늑막상출액, 늑막반, 미만성늑막섬유화로 분류되기도 하나 일반적으로 늑막비후를 단순히 석면폭로의 지표로 여기고 간과하는 경우가 많다. 그러나 석면에 관련된 질환은 대부분이 만성적이고 뒤에 질환이 발현되는 경우가 빈번하여 늑막변화를 나타내는 근로자에 대한 합리적인 관리와 검사가 필요할 것으로 생각된다. 방법: 석면분진을 취급하는 9개 시업장의 작업장 부서별 석면분진농도를 측정하고 석면을 취급하는 업무에 종사하고 있는 222명을 대상으로 하여 설문조사, 흉부 방사선 사진, 폐기능검사를 실시하여 우리나라 석면 취급 근로자들에서 발생되는 늑막변화에 대한 역학조사와 함께 늑막변화에 따른 폐기능의 변화, 그리고 폐기능의 저하에 미치는 인자들에 대한 조사를 실시 하였고 성적은 SAS을 이용하여 분석하였다. 결과: 1) 조사대상 사업장은 총 9개 였으며 대상 사업장중 1개소를 제외하고는 석면분진 농도는 허용농도 이하였다. 조사대상 근로자중 폐기능 검사를 실시한 222명을 대상으로 하였고 남자가 196명(88.3%), 여자 26명(11.7%)였으며 평균 연령은 $41.9{\pm}9.8$세 이었고 평균 석면분진 폭로기간은 $10.6{\pm}7.8$년 이었다. 2) 흉부 방사선 소견상 정상소견을 보인 198명(89.19%), 결핵병변이 관찰된 경우 6명(2.7%), 늑막비후가 보인 경우 17명(7.66%), 망상형 간질성 음영이 의심되는 경우 2명(0.90%)이었다. 3) 늑막비후가 있는 군과 없는 군 사이에 평균신장, 흡연력, 분진농도에는 차이가 없으나, 늑막비후가 없는 군에 비하여 있는군에서 연령, 흡연자의 누적 흡연력, 분진 폭로기간이 유의하게 증가되어 있었다. 4) 늑막비후가 있는 군과 없는 군에서 폐기능의 차이를 보면, 모든 폐기능의 지표에서 늑막비후가 있는 군에서 늑막비후가 없는 군에 비해 유의한 감소를 보였다. 5) 단순회귀분석에서 누적흡연력이 클수록, 폭로기간이 길수록, 그리고 분진농도가 높을 수록 폐기능지표들은 감소하였으며 특히 소기도폐색의 지표인 $FEF_{75}$에서 유의하게 변화하였고 누적흡연력은 $FEF_{50}$의 변화에 유의한 영향을 미쳤다. 6) 다중회귀분석시 폐기능지표등이 누적흡연력이 증가할수록 감소하는 경향을 보였으나 주로 소기도폐색지표에 유의한 감소를 보였으며, 늑막비후가 있는 군에서 없는 군에 비하여 폐기능이 현저히 감소하였다. 결론: 석면 취급 근로자에서 여러가지 폐기능 검사 항목과 석면분진농도등 영향을 미칠수 있는 인자를 조사한 결과 분진폭로농도와 폭로기간에 따라 $FEF_{50}$와 $FEF_{75}$이 특히 민감하게 반응하여 석면에 대한 폐질환의 조기진단을 위하여 도움이 될 것으로 생각되며, 본 연구에서 폐실질병변은 없으나 늑막비후만 관찰되는 경우에도 폐기능이 현저하게 감소한 것으로 미루어 이에 대한 적극적인 관리가 필요하다.

• 대한방사선치료학회지
• /
• 제34권
• /
• pp.21-30
• /
• 2022

목 적: 본원에서 방사선치료를 받는 두경부암 환자들에게 적용하기 위하여 도입한 구강용 고정장치 BinkieRT^TM의 구강 내 재현성을 평가하고 기존 고정장치와의 재질과 선량 비교를 통해 그 유용성을 평가하고자 한다. 대상 및 방법: BinkieRT^TM를 사용하여 치료한 두경부암 환자 24명을 대상으로 혀 재현성 평가를 위해 치료계획용 CT와 치료 중 3일 간격으로 촬영된 CBCT영상에 혀를 그린 후 DSC와 중심축 이동값을 분석하였다. 또한 BinkieRT^TM를 사용하는 경우와 다른 종류의 구강 고정장치(mouth piece, paraffin wax)를 사용했을 때 선량 분포측면에서 혀에 조사되는 선량을 비교하였다. 이를 위해 상악에 위치한 종양 치료를 받는 환자들과 편측 두 경부암 환자들을 각 10명씩 선정하고 전산화 치료 계획 시 혀에 조사되는 선량을 확인하였다. 마지막으로 재질 평가 측면에서는 임상에서 혀를 치료부위 반대 방향으로 보내 고정하는 목적으로 많이 사용하는 Paraffin Wax나 Putty와의 비교를 통하여 BinkieRT^TM의 단순 물질 특성을 알아보기 위해 전산화 치료 장비로 Mass density 및 상대전자밀도 등을 확인하고, 팬텀과 이온챔버를 이용하여 Transmission Factor를 측정하였다. 결 과: BinkieRT^TM를 사용 시 DCS (n=144) 의 평균은 0.8 ± 0.07, 95% 신뢰구간은 0.79~0.82 로 나타났고, 빈도분포 분석 결과는 왜도 -0.8, 첨도 0.61 로 나타났다. 치료 기간 중 혀 중심축 이동에 대한 편차를 분석하기 위해 LR, SI, AP 방향 이동에 대한 95% 신뢰구간과 편차의 이상값인 0에 대한 일표본 t검정을 실시하였다.(n=144) t검정 결과 LR, SI 방향의 평균은 각각 0.01 ± 0.14 cm(p>.05), 0.03 ± 0.25 cm(p>.05), AP 방향은 -0.08 ± 0.25 cm(p<.05) 로 나타났다. 혀를 치료부위의 반대 방향으로 고정한 경우인 편측 귀밑샘 종양 환자들의 경우 BinkieRTTM를 사용한 환자들의 혀 평균선량은 처방선량 대비 평균 16.92% ± 3.58%, Paraffin Wax 환자 23.99% ± 10.86% 로 BinkieRT^TM 사용 시 혀 선량이 비교적 더 낮은 것으로 나타났다(p<.05). 반면, 혀를 아래로 누르는 목적으로 BinkieRT^TM를 사용한 환자들 중 비강암 환자의 혀 평균선량은 평균 4.4% ± 5.6%, mouth piece를 사용한 환자들은 5.9% ± 6.8% 로 나타났으나, 통계적으로 유의하지 않았다(p>.05). Paraffin Wax와 BinkieRT^TM, Putty의 상대전자밀도 측정 결과 각각 0.94, 0.99, 1.26, Transmission Factor는 각각 0.99, 0.98, 0.96로 나타났다. 결 론: BinkieRT^TM의 치료기간에 걸쳐 나타난 혀 DSC분석 결과는 약 0.8, 고정력은 LR, SI 방향으로의 편차가 0에 가까울 정도로 매우 우수하였으며, AP방향의 고정력 또한 평균 0.08 cm 로 우수한 편이었다. 또한 혀를 옆으로 밀어 치료부위 반대 방향으로 고정하는 편측 두경부암 환자의 경우 Paraffin wax나 Putty를 사용하는 것보다 BinkieRT^TM를 사용하는 것이 혀에 조사되는 불필요한 선량을 줄일 수 있는 것으로 나타났다. 그러므로 본 실험 결과와 BinkieRT^TM의 특성을 적절히 고려하여 두경부암 치료에 적용한다면 혀의 재현성 유지 및 선량 감소에 도움이 되리라 사료된다.

• Journal of Preventive Medicine and Public Health
• /
• 제30권1호
• /
• pp.45-59
• /
• 1997

소아에서부터 청소년기까지 혈청 지질의 지속성(tracking)은 서구에서 행해진 연구들에 의해서 이미 잘 알려져 있으나 국내에서는 이에 관한 연구가 거의 이루어지지 않았다. 본 연구는 우리나라 청소년의 혈청 지질치의 변화를 조사하고 지속성이 있는지를 분석하였다. 연구대상은 경기도 강화군에서 진행하고 있는 강화 아동 혈압 코호트(719명)의 청소년들로 12세, 14세, 16세 세 번에 걸쳐서 공복 후 혈액검사(혈청 총 콜레스테롤, 중성지방, LDL 콜레스테롤, HDL 콜레스테롤을 포함)와 신체계측을 시행하였다. 이 중 3번의 혈액 검사에서 10시간 이상의 공복이 확인된 청소년 309명 (남자 162명, 여자 147명)을 최종 연구대상으로 선정하였다. 연구대상이 된 청소년들과 연구대상에서 제외한 청소년들의 12세때 초기 검사치들을 t 검정을 이용하여 서로 비교한 결과 통계학적으로 유의한 차이는 없었다. 연구방법은 우선 혈청 지질치의 변화양상을 보기 위하여 각 검사 년도간에 반복 측정된 분산분석을 시행하였다. 각 혈청지질의 지속성을 보기 위해서는 첫께, 초기값을 바탕으로 사분위 집단으로 나누어 각 사분위 집단의 혈청지질치가 매 검사 연도마다 어떻게 변하는 지를 그림으로 나타내었다. 둘째, 혈청지질치의 검사 시기사이의 스피어맨 상관계수를 구하였다. 그리고 마지막으로 각 검사 년도의 혈청지질치를 사분위 집단으로 구분하여 초기검사에서 가장 위험도가 큰 집단에 속한 사람들이 지속적으로 위험도가 큰 집단에 속하는 백분율을 계산하였다. 연구결과 남녀 모두 4년간 세 번의 검사에서 혈청 총 콜레스테롤은 남자가 초기검사에서 $160.7{\pm}25.3mg/dl$, 최종 추적검사에서 $150.0{\pm}27.8mg/dl$, 여자가 초기검사에서 $168.8{\pm}29.7mg/dl$, 최종 추적검사에서 $168.8{\pm}29.7mg/dl$, 중성지방은 남자가 $98.0{\pm}45.7mg/dl$에서, $114.1{\pm}67.9/mg/dl$로, 여자가 $109.9\geq37.1mg/dl$에서, $104.9{\pm}47.6mg/dl$로, LDL 콜레스테롤은 남자가 $93.6{\pm}21.2mg/dl$에서, $83.0{\pm}25.0mg/dl$로 여자가 $83.0{\pm}25.0mg/dl$에서, $94.7{\pm}24.4mg/dl$로, HDL 콜레스테롤은 남자가 $47.6{\pm}9.1mg/dl$에서, $44.2{\pm}9.4mg/dl$로, 여자가 $48.8{\pm}10.0mg/dl$에서, $47.8{\pm}11.3mg/dl$ 변화하였다. 반복 측정한 분산분석 결과 남녀 모두 4년 동안 혈청 총 콜레스테롤, LDL 콜레스테롤, HDL콜레스테롤이 통계적으로 유의하게 감소하였다. 특히 남자 LDL 콜레스테롤은 두 번의 추적검사에서 모두 감소한 것으로 나타났다. 중성지방은 남자에서는 지속적으로 증가하였고 여자에서는 변화가 없었다. 같은 연령에서 남녀간의 각 혈청지질치를 비교해보면 중성지방을 제외하고는 모두 여자가 남자보다 더 컸다. 혈청 지질의 초기 검사와 최종 검사간의 스피어맨 상관분석과 각 혈청 지질치의 위험도가 가장 큰 사분위집단에 잔류하는 백분율을 보면 지속성이 존재하였다. 혈청 총 콜레스테롤과 HDL 콜레스테롤에서 각 시기의 검사치들의 상관계수는 남자가 0.6 이상, 여자가 약 0.7 이상이었으며 통계적으로 유의하였다. 첫 번께 검사에서 위험도가 가장 큰 사분위 집단에 속한 사람 중 두 번째 검사에서도 위험도가 가장 큰 사분위 집단에 속한 백분율은 여자의 중성지방(42.9%)을 제외하고는 모두 50%이상이었다. 이들이 세 번째 검사에서도 같은 사분위 집단에 잔류한 백분율은 여자의 중성지방(25.7%)을 제외하고 모두 35%이상이었다. 결론적으로 청소년기의 혈청 지질치는 지속성이 있음을 알 수 있었다. 그러나 본 연구는 4년 동안의 변화이고 성인까지의 변화를 보기 위해서는 좀 더 장기적인 연구가 필요하다.

• Journal of Chest Surgery
• /
• 제39권10호
• /
• pp.739-748
• /
• 2006

토끼의 25분간의 척수허혈 모델에서 cyclosporin A의 신경보호효과를 신경병리학적 연관성과 면역조직화학적분석을 통하여 알아보고자 하였다. 대상 및 방법: 몸무게가 3.0 kg 전후의 뉴질랜드산 토끼를 이용하였고 복부 대동맥을 25분간 차단하였다. 32마리의 토끼를 무작위로 4군으로 나누어 대조군인 12군(n=8)과 17군(n=8)은 복부 대동맥 차단만 시행한 후 12군은 2일째, 17군은 7일째 희생시켜 신경학적 평가와 조직학적 검사를 시행하였다. 실험군인 Cs2군(n=8)과 Cs7군(n=8)은 복부 대동맥을 차단 후 재관류 15분 후에 cyclosporin A (25 mg/kg)를 정맥 주입한 후 Cs2군은 2일째, Cs7군은 7일째 희생시켜 신경학적 평가와 조직학적 검사를 시행하였다. 결과: 모든 토끼가 술 후 생존하였으며 술 후 2일째 신경학적 평가에 있어서는 군들 간 차이가 얼었으나 술 후 7일째 시행한 평가에서 복부대동맥 허혈 후 cyclosporin A를 투여한 Cs7군의 Tarlov score가 평균 $2.75{\pm}0.89$로 투여하지 않은 17군의 $1.25{\pm}1.39$에 비해 의미 있게 높아 신경학적 평가상 덜 손상을 받았음을 알 수 있었다(p<0.05). 또한 대조군 17군에서는 신경학적 평가가 2일째보다 7일째 악화하는 경향이었으나 통계학적으로 의미 있는 차이는 없었고 실험군 Cs7군에 있어서는 신경학적 평가가 2일째 $1.87{\pm}0.83$에 비해 7일째 $2.75{\pm}0.89$로 의미 있게 호전되었다(p<0.05). 모든 군을 조직학적으로 손상의 정도에 따라 등급을 매겼으며 신경학적 평가와의 상관관계를 분석하였는데 상관계수 -0.44로 조직학적 손상정도와 신경학적 평가사이에 유의한 관계가 있었다(p=0.009). 병리조직학적 등급을 4군 간 비교하였을 때 2일째 희생시킨 대조군과 실험군 사이에는 유의한 차이가 없었으나 7일째 희생시킨 17군은 조직학적 등급이 $2.13{\pm}1.36$이었으나 Cs7군은 $1.0{\pm}0.53$으로 두 군 간 유의한 차이가 있어 병리학적으로도 cyclosporin A를 투여한 실험군 Cs7군이 대조군 17군에 비해 덜 손상을 받았음을 알 수 있었다(p=0.039). 12군과 Cs2군에서 TUNEL 염색에 양성반응을 보이는 신경세포의 수는 12군이 $17.5{\pm}22.6$개였고 Cs2군이 $12.5{\pm}11.1$개로 통계학적으로 유의한 차이가 없었다. Heat shock protein-70 (HSP70)과 neuronal nitric oxide synthase (nNOS)에 대한 면역조직화학검사에서 실험군 Cs2군의 신경세포가 대조군 12군에 비해 HSP70과 nNOS의 과발현을 보였으며, 이는 통계학적으로 유의한 차이를 보였다(p<0.05). nNOS와 HSP70의 발현은 강한 연관성을 보였고(상관계수 0.91, p=0.000), nNOS를 발현하는 세포가 동시에 HSP70도 발현함을 확인할 수 있었다. 결론: 우리는 cyclosporin A가 토끼의 25분간의 척수허혈에 대해 척수보호 효과가 있었으며 이는 HSP70의 과발현과 연관이 있으리라 생각한다.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1995년도 제27회 학술발표회
• /
• pp.101-113
• /
• 1995

The objective of this research is to test the feasibility of developing a statewide truck traffic forecasting methodology for Wisconsin by using Origin-Destination surveys, traffic counts, classification counts, and other data that are routinely collected by the Wisconsin Department of Transportation (WisDOT). Development of a feasible model will permit estimation of future truck traffic for every major link in the network. This will provide the basis for improved estimation of future pavement deterioration. Pavement damage rises exponentially as axle weight increases, and trucks are responsible for most of the traffic-induced damage to pavement. Consequently, forecasts of truck traffic are critical to pavement management systems. The pavement Management Decision Supporting System (PMDSS) prepared by WisDOT in May 1990 combines pavement inventory and performance data with a knowledge base consisting of rules for evaluation, problem identification and rehabilitation recommendation. Without a r.easonable truck traffic forecasting methodology, PMDSS is not able to project pavement performance trends in order to make assessment and recommendations in the future years. However, none of WisDOT's existing forecasting methodologies has been designed specifically for predicting truck movements on a statewide highway network. For this research, the Origin-Destination survey data avaiiable from WisDOT, including two stateline areas, one county, and five cities, are analyzed and the zone-to'||'&'||'not;zone truck trip tables are developed. The resulting Origin-Destination Trip Length Frequency (00 TLF) distributions by trip type are applied to the Gravity Model (GM) for comparison with comparable TLFs from the GM. The gravity model is calibrated to obtain friction factor curves for the three trip types, Internal-Internal (I-I), Internal-External (I-E), and External-External (E-E). ~oth "macro-scale" calibration and "micro-scale" calibration are performed. The comparison of the statewide GM TLF with the 00 TLF for the macro-scale calibration does not provide suitable results because the available 00 survey data do not represent an unbiased sample of statewide truck trips. For the "micro-scale" calibration, "partial" GM trip tables that correspond to the 00 survey trip tables are extracted from the full statewide GM trip table. These "partial" GM trip tables are then merged and a partial GM TLF is created. The GM friction factor curves are adjusted until the partial GM TLF matches the 00 TLF. Three friction factor curves, one for each trip type, resulting from the micro-scale calibration produce a reasonable GM truck trip model. A key methodological issue for GM. calibration involves the use of multiple friction factor curves versus a single friction factor curve for each trip type in order to estimate truck trips with reasonable accuracy. A single friction factor curve for each of the three trip types was found to reproduce the 00 TLFs from the calibration data base. Given the very limited trip generation data available for this research, additional refinement of the gravity model using multiple mction factor curves for each trip type was not warranted. In the traditional urban transportation planning studies, the zonal trip productions and attractions and region-wide OD TLFs are available. However, for this research, the information available for the development .of the GM model is limited to Ground Counts (GC) and a limited set ofOD TLFs. The GM is calibrated using the limited OD data, but the OD data are not adequate to obtain good estimates of truck trip productions and attractions .. Consequently, zonal productions and attractions are estimated using zonal population as a first approximation. Then, Selected Link based (SELINK) analyses are used to adjust the productions and attractions and possibly recalibrate the GM. The SELINK adjustment process involves identifying the origins and destinations of all truck trips that are assigned to a specified "selected link" as the result of a standard traffic assignment. A link adjustment factor is computed as the ratio of the actual volume for the link (ground count) to the total assigned volume. This link adjustment factor is then applied to all of the origin and destination zones of the trips using that "selected link". Selected link based analyses are conducted by using both 16 selected links and 32 selected links. The result of SELINK analysis by u~ing 32 selected links provides the least %RMSE in the screenline volume analysis. In addition, the stability of the GM truck estimating model is preserved by using 32 selected links with three SELINK adjustments, that is, the GM remains calibrated despite substantial changes in the input productions and attractions. The coverage of zones provided by 32 selected links is satisfactory. Increasing the number of repetitions beyond four is not reasonable because the stability of GM model in reproducing the OD TLF reaches its limits. The total volume of truck traffic captured by 32 selected links is 107% of total trip productions. But more importantly, ~ELINK adjustment factors for all of the zones can be computed. Evaluation of the travel demand model resulting from the SELINK adjustments is conducted by using screenline volume analysis, functional class and route specific volume analysis, area specific volume analysis, production and attraction analysis, and Vehicle Miles of Travel (VMT) analysis. Screenline volume analysis by using four screenlines with 28 check points are used for evaluation of the adequacy of the overall model. The total trucks crossing the screenlines are compared to the ground count totals. L V/GC ratios of 0.958 by using 32 selected links and 1.001 by using 16 selected links are obtained. The %RM:SE for the four screenlines is inversely proportional to the average ground count totals by screenline .. The magnitude of %RM:SE for the four screenlines resulting from the fourth and last GM run by using 32 and 16 selected links is 22% and 31 % respectively. These results are similar to the overall %RMSE achieved for the 32 and 16 selected links themselves of 19% and 33% respectively. This implies that the SELINICanalysis results are reasonable for all sections of the state.Functional class and route specific volume analysis is possible by using the available 154 classification count check points. The truck traffic crossing the Interstate highways (ISH) with 37 check points, the US highways (USH) with 50 check points, and the State highways (STH) with 67 check points is compared to the actual ground count totals. The magnitude of the overall link volume to ground count ratio by route does not provide any specific pattern of over or underestimate. However, the %R11SE for the ISH shows the least value while that for the STH shows the largest value. This pattern is consistent with the screenline analysis and the overall relationship between %RMSE and ground count volume groups. Area specific volume analysis provides another broad statewide measure of the performance of the overall model. The truck traffic in the North area with 26 check points, the West area with 36 check points, the East area with 29 check points, and the South area with 64 check points are compared to the actual ground count totals. The four areas show similar results. No specific patterns in the L V/GC ratio by area are found. In addition, the %RMSE is computed for each of the four areas. The %RMSEs for the North, West, East, and South areas are 92%, 49%, 27%, and 35% respectively, whereas, the average ground counts are 481, 1383, 1532, and 3154 respectively. As for the screenline and volume range analyses, the %RMSE is inversely related to average link volume. 'The SELINK adjustments of productions and attractions resulted in a very substantial reduction in the total in-state zonal productions and attractions. The initial in-state zonal trip generation model can now be revised with a new trip production's trip rate (total adjusted productions/total population) and a new trip attraction's trip rate. Revised zonal production and attraction adjustment factors can then be developed that only reflect the impact of the SELINK adjustments that cause mcreases or , decreases from the revised zonal estimate of productions and attractions. Analysis of the revised production adjustment factors is conducted by plotting the factors on the state map. The east area of the state including the counties of Brown, Outagamie, Shawano, Wmnebago, Fond du Lac, Marathon shows comparatively large values of the revised adjustment factors. Overall, both small and large values of the revised adjustment factors are scattered around Wisconsin. This suggests that more independent variables beyond just 226; population are needed for the development of the heavy truck trip generation model. More independent variables including zonal employment data (office employees and manufacturing employees) by industry type, zonal private trucks 226; owned and zonal income data which are not available currently should be considered. A plot of frequency distribution of the in-state zones as a function of the revised production and attraction adjustment factors shows the overall " adjustment resulting from the SELINK analysis process. Overall, the revised SELINK adjustments show that the productions for many zones are reduced by, a factor of 0.5 to 0.8 while the productions for ~ relatively few zones are increased by factors from 1.1 to 4 with most of the factors in the 3.0 range. No obvious explanation for the frequency distribution could be found. The revised SELINK adjustments overall appear to be reasonable. The heavy truck VMT analysis is conducted by comparing the 1990 heavy truck VMT that is forecasted by the GM truck forecasting model, 2.975 billions, with the WisDOT computed data. This gives an estimate that is 18.3% less than the WisDOT computation of 3.642 billions of VMT. The WisDOT estimates are based on the sampling the link volumes for USH, 8TH, and CTH. This implies potential error in sampling the average link volume. The WisDOT estimate of heavy truck VMT cannot be tabulated by the three trip types, I-I, I-E ('||'&'||'pound;-I), and E-E. In contrast, the GM forecasting model shows that the proportion ofE-E VMT out of total VMT is 21.24%. In addition, tabulation of heavy truck VMT by route functional class shows that the proportion of truck traffic traversing the freeways and expressways is 76.5%. Only 14.1% of total freeway truck traffic is I-I trips, while 80% of total collector truck traffic is I-I trips. This implies that freeways are traversed mainly by I-E and E-E truck traffic while collectors are used mainly by I-I truck traffic. Other tabulations such as average heavy truck speed by trip type, average travel distance by trip type and the VMT distribution by trip type, route functional class and travel speed are useful information for highway planners to understand the characteristics of statewide heavy truck trip patternS. Heavy truck volumes for the target year 2010 are forecasted by using the GM truck forecasting model. Four scenarios are used. Fo~ better forecasting, ground count- based segment adjustment factors are developed and applied. ISH 90 '||'&'||' 94 and USH 41 are used as example routes. The forecasting results by using the ground count-based segment adjustment factors are satisfactory for long range planning purposes, but additional ground counts would be useful for USH 41. Sensitivity analysis provides estimates of the impacts of the alternative growth rates including information about changes in the trip types using key routes. The network'||'&'||'not;based GMcan easily model scenarios with different rates of growth in rural versus . . urban areas, small versus large cities, and in-state zones versus external stations. cities, and in-state zones versus external stations.

• 마케팅과학연구
• /
• 제19권1호
• /
• pp.23-35
• /
• 2009

A hypermarket as the one of the most globally standardized retailing format is also the type of store among various types of stores that the most active in expanding into other foreign markets. Recently, as several Korean retailing companies start to penetrate into Chinese market they differentiate themselves with modern facilities and customers service oriented high-end concept. China and Korea as Far East Asian countries share many common values, however precise and careful analysis should be carried out since there may also be critical differences in socio-economic aspects as well as in consumption patterns due to the level of development stages of retail industry among two countries. Even though precise and careful study is crucial on Chinese retailing market and consumers, none of researches and studies on 'how the quality of service dimensional structure is different between Korea and China', and 'what will be the most important and influential service dimensional factors for Chinese consuers compared to the hypermarkets customers in Korea' in order to improve the level of Chinese consumers satisfaction' have been fulfilled At this point of view, this study uses KD-SQS (Rho Eun Jung & Sir Yong Gu, 2008) which is a measure of Korean hypermarkets service quality to set up a hypothesis on Korean and Chinese consumers, and an empirical analysis is conducted. We try to get the answers about how the comparative importance of Service quality dimensions which decides the level of customer satisfaction is different depending on the cultural dimensions and socio-economic factors among two countries, Korea and China. Based upon the results, we try to give a valuable suggestion of what service dimensional factors should be reinforced to improve the level of CS in Chinese retailing market. Hypotheses for this study are as follows : H1. Each dimension of Service Quality significantly affects the level of CS H2. The effect of 'Basic Benefit' in service quality dimensions on the level of CS is greater in China than in Korea H3. The effect of 'Promotion' in service quality dimensions on the level of CS is greater in China than in Korea H4. The effect of 'Physical Aspects'in service quality dimensions on the level of CS is greater in Korea than in China. H5. The effect of 'Personal Interaction' in service quality dimensions on the level of CS is greater in China than in Korea H6. The effect of 'Policy' in service quality dimensions on the level of CS will be greater in Korean than in China H7. The effect of additional convenience in service quality dimensions on the level of CS will be greater in Korean than in China. More than 1,100 data were collected directly from the surveys of Chinese and Korean consumers in order to verify the hypotheses above. In Korea, stores which have floor space of over $9,000m^2$and opened later than year 2000 were selected for the samples, and thus Gayang, Wolgye, Sangbong, Eunpyeong, Suh-Suwon, Gojan stores and their customers were surveyed. In China, notable differences in the income levels and consumer behaviors between cities and regions were considered, and thus the research area was limited to the stores only in Shanghai. 6 stores which have the size of over $6,000m^2$ and opened later than 2000, such as Ruihong, Intu, Mudanjang, Sanrin, Raosimon, and Ranchao stores were selected for the survey. SPSS 12.0 and AMOS 7.0 were used as statistical tools, and exploratory factor analysis, confirmatory factor analysis, and multi-group analysis were conducted. In order to carry out a multi group analysis that decides whether the structure variables which shows the different effects of 6 service dimensions in Korean and Chinese groups is statistically valid, configural invariance, metric invariance, and structural invariance are tested in order. At the results of the tests, 3 out of 7 hypotheses were supported and other 4 hypotheses were denied. According to the study, 4 dimensions (Basic Benefit, Physical Environment, Policy, and additional convenience) were positively correlated with CS in Korea, and 3 dimensions (i.e. basic benefit, policy, additional convenience) were significant in China. However, the significance of the service-dimensions was turned out to be partially different in Korea and China. The Basic Benefit is more influential in deciding the level of CS in china than Korea, however Physical Aspect is more important factor in Korea. 'Policy dimension' did not make significant difference between two countries. In the 'additional convenience dimension', the differences in 'socio-economic factors' than in'cultural background' were considered as more important in Chinese consumers than Korean. Overall, the improvement of Service quality will be crucial factors to increase the level of CS in Chinese market same as Korean market. In addition, more emphases need to be placed on the service qualities of 'Basic Benefit' and 'additional convenience' dimensions in China. In particular, 'low price' and 'product diversity' that constitute 'Basic Benefit' are proved to be comparatively disadvantageous and weak points of Korean companies compared to global players, and thus the prompt strengthening those dimensions would be urgent for Korean retailers. Moreover, additional conveniences such as various tenants and complex service and entertaining area will be more important in China than in Korea. Besides, Applying advanced Korean Hypermaret`s customer policy to Chinese consumers will help to get higher reliability and to differentiate themselves to other competitors. However, as personal interaction, physical aspect, promotions were proved as not significant for the level of CS in China, Korean companies need to reconsider the priority order of resource allocations when they tap into Chinese market.

• 대기
• /
• 제24권3호
• /
• pp.303-315
• /
• 2014

HadGEM2-CC 모델에서의 $CO_2$ 농도증가에 대한 RCP 시나리오의 결과는 21세기 말 전 지구 연평균 기온과 강수 증가가 전망되고 이에 따라 식물의 생산량 및 호흡량 증가가 전망된다. 20세기 말 일차생산량(GPP와 NPP), 호흡량, LAI가 21세기 말 기온 증가에 따라 증가하는 점은 기존의 Shao et al. (2013)와 유사하였다. 특히 이전 연구와 유사하게 21세기 말 일차생산량과 호흡량은 고위도보다 열대 저위도 지역에서 증가량이 더 컸다. 기온이 상승하고 강수량이 증가하면서 식생이 자라지 않던 나지 면적이 감소하였고, 이에 따른 식생 면적 증가는 식생의 생산량(GPP, NPP) 증가로 나타났다. 특히, 본 연구에서는 C3 초지, 활엽수의 면적 증가가 뚜렷하였다. 이는 Beck and Goetz (2011)에서 언급한 대로 온난화에 따른 식생 면적 증가가 식생 생산성과 연관되어 $CO_2$ 흡수작용을 강화하는 데 기여할 수 있음을 의미한다. Shao et al. (2013)에 따르면 21세기 말 누적 NEE는 증가가 전망되고 이는 특히 열대와 고위도 지역이 주요 흡수원으로 작용하였기 때문으로 그 원인을 설명하였다. 본 연구에서 사용된 HadGEM2-CC에서는 전 지구 평균적으로 NEE 흡수가 증가하는 경향은 동일하게 전망하며, 이는 열대보다는 북반구 고위도지역인 유라시아와 북미 대륙에서 증가한 흡수가 그 원인으로 분석되었다(Fig. 8). 앞서 Mynenl et al. (1997)에 따르면 기온상승에 따라 식생의 광합성활동, 생장시기 길이와 시작시기의 당겨짐을 보고하였다. 본 연구 실험에서도 이와 유사하게 미래에 기온 상승에 따라 식생 성장 기간이 길어지고 LAI도 증가하며 식생 지대가 점차 고위도로 북상할 것을 전망하였다(Figs. 5, 12b). 이에 따라 육상 생태계의 $CO_2$ 흡수량은 20세기 말보다 21세기 말에 증가하였고 우리나라가 속해있는 동아시아지역($90^{\circ}E{\sim}140^{\circ}E$, $20^{\circ}N{\sim}60^{\circ}N$)은 기온, 강수뿐 아니라 $CO_2$ 흡수량도 같은 위도대의 전 지구 동서평균보다 크게 모의되었다. RCPs에 따른 흡수율은 21세기 중반까지는 대기 중 이산화탄소 농도 변화율과 유사한 경향을 보이는데 RCP 8.5에서는 21세기 후반에 흡수 증가율이 감소하며 이는 Liddicoat et al. (2013) 에서 보인것과 유사하다. 하지만 대기 중 $CO_2$의 증가와 식생분포 지역의 확대에도 불구하고 21세기 말 육상생태계의 순생태계흡수량은 크게 증가하지 않음을 확인할 수 있었다. 이는 기온 상승이 크게 일어난 21세기 후반부터 토양 호흡의 급격한 증가로 인하여 육상생태계의 이산화탄소 흡수 능력은 감소한 것에 기인하였다. 향후 본 연구결과의 유의성을 확보하기 위해 다양한 모델의 자료를 추가할 필요가 있다. Shao et al. (2013)에 따르면 미래 탄소 흡수 전망에 있어 전 지구 및 위도별 모의 결과가 모델마다 매우 다양한데 이는 지면생태모형 간의 식생역학, 물리과정의 차이로 해석된다. 미래 육상생태계의 이산화탄소 흡수 능력의 변화와 기후변화를 보다 정확하게 예측하기 위해서는 다른 모델의 자료를 이용한 불확실성을 정량화 하는 것이 필요하며 이는 전 지구 및 지역별 탄소 순환 이해를 높이는 데 기여할 것이다.

• 지능정보연구
• /
• 제18권3호
• /
• pp.185-202
• /
• 2012

오늘날 정보사회에서는 정보에 대한 가치를 인식하고, 이를 위한 정보의 활용과 수집이 중요해지고 있다. 얼굴 표정은 그림 하나가 수천개의 단어를 표현할 수 있듯이 수천 개의 정보를 지니고 있다. 이에 주목하여 최근 얼굴 표정을 통해 사람의 감정을 판단하여 지능형 서비스를 제공하기 위한 시도가 MIT Media Lab을 필두로 활발하게 이루어지고 있다. 전통적으로 기존 연구에서는 인공신경망, 중회귀분석 등의 기법을 통해 사람의 감정을 판단하는 연구가 이루어져 왔다. 하지만 중회귀모형은 예측 정확도가 떨어지고, 인공신경망은 성능은 뛰어나지만 기법 자체가 지닌 과적합화 문제로 인해 한계를 지닌다. 본 연구는 사람들의 자극에 대한 반응으로서 나타나는 얼굴 표정을 통해 감정을 추론해내는 지능형 모형을 개발하는 것을 목표로 한다. 기존 얼굴 표정을 통한 지능형 감정판단모형을 개선하기 위하여, Support Vector Regression(이하 SVR) 기법을 적용하는 새로운 모형을 제시한다. SVR은 기존 Support Vector Machine이 가진 뛰어난 예측 능력을 바탕으로, 회귀문제 영역을 해결하기 위해 확장된 것이다. 본 연구의 제안 모형의 목적은 사람의 얼굴 표정으로부터 쾌/불쾌 수준 그리고 몰입도를 판단할 수 있도록 설계되는 것이다. 모형 구축을 위해 사람들에게 적절한 자극영상을 제공했을 때 나타나는 얼굴 반응들을 수집했고, 이를 기반으로 얼굴 특징점을 도출 및 보정하였다. 이후 전처리 과정을 통해 통계적 유의변수를 추출 후 학습용과 검증용 데이터로 구분하여 SVR 모형을 통해 학습시키고, 평가되도록 하였다. 다수의 일반인들을 대상으로 수집된 실제 데이터셋을 기반으로 제안모형을 적용해 본 결과, 매우 우수한 예측 정확도를 보임을 확인할 수 있었다. 아울러, 중회귀분석이나 인공신경망 기법과 비교했을 때에도 본 연구에서 제안한 SVR 모형이 쾌/불쾌 수준 및 몰입도 모두에서 더 우수한 예측성과를 보임을 확인할 수 있었다. 이는 얼굴 표정에 기반한 감정판단모형으로서 SVR이 상당히 효과적인 수단이 될 수 있다는 점을 알 수 있었다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.