• Bulletin of the Korean Chemical Society
• /
• v.18 no.8
• /
• pp.880-886
• /
• 1997

Ab initio calculations were carried out on the gas phase acid-catalyzed hydrolysis reactions of sulfinamide using the 3-21G* basis sets. Single point calculations were also performed at the MP2/6-31G* level. The first step in the acid-catalyzed hydrolysis of N-methylmethanesulfinamide, Ⅰ, involves protonation. The most favorable form is the O-protonated one, Ⅱ, which is then transformed into a sulfurane intermediate, Ⅲ, by addition of a water molecule. The reaction proceeds further by an intramolecular proton transfer from O to N (TS2), which is followed by N-S bond cleavage (TS3) leading to the final products. The rate determining step is the N-S bond cleavage (TS3) at the RHF/3-21G* level, whereas it becomes indeterminable at the MP2/6-31G*//3-21G* level of theory. However, the substituent effect studies with N-protonated N-arylmethanesulfinamide, ⅩⅢ, at the MP2/6-31G*//3-21G* level support the N-S bond breaking step as rate limiting.

• Food Science and Preservation
• /
• v.15 no.5
• /
• pp.754-759
• /
• 2008

The effect of citric acid-aqueous chlorine dioxide ($ClO_2$) treatment of radish seeds artificially contaminated with Salmonella typhimurium was studied. Radish seeds were inoculated by immersion, in more than 106 log CFU/g seed, of a suspension of S. typhimurium, dried, and stored sealed at $4^{\circ}C$ Radish seeds soaked in 200 ppm aqueous ClO2 solution for 10 min showed a bacterial reduction of 1.08 log CFU/g seed, and the lowering of microbial burden noted in seeds soaked in 2% (w/v) citric acid solution for 10 min was 2.89 log CFU/g seed. Next, radish seeds were exposed to 0.5% (v/v) glycerol solution for 10 min either before or after treatment with 200 ppm aqueous ClO2 or 2% (w/v) citric acid for 10 min. Glycerol exposure after citric acid treatment reduced bacteria by 3.46 log CFU/g seed, and glycerol treatment after aqueous $ClO_2$ treatment reduced the microbial burden by 2.14 log CFU/g seed. Both glycerol treatments yielded better elimination of S. typhimurium than did a single treatment with either citric acid or aqueous $ClO_2$. Radish seeds inoculated with S. typhimurium were treated throughout the entire growth period. Although radish seed treatment was effective, treatment by citric acid and aqueous $ClO_2$ after sprouting was not effective to eliminate S. typhimurium.

• Journal of Energy Engineering
• /
• v.13 no.1
• /
• pp.75-81
• /
• 2004

ZZFCa sorbents for hot gas desulfurization in IGCC were prepared by adding calcium oxide to ZZF sorbent in order to improve its attrition resistance in this study. ASTM attrition test for the sorbent was performed at several different weight percentages of CaO to investigate the attrition characteristics of ZBFCa sorbents as a function of CaO content. Attrition index of ZZF without CaO was 28.3% and its collected attrition index was 10.8％. ZZFCa-3 containing 3 wt% CaO showed the lowest attrition index (AI=17.3％, CAI=8.8％) in the test. From the results of SEM morphologies and particle size distribution measurements, ZZFCa-3 maintained a fine shape and a desirable average particle size even after attrition test. In the experiments of sulfidation/regeneration for ZZFCa-3 sorbent concentration of hydrogen sulfide in coal gas was lowered from 10000 ppm to below 1 ppm. Sulfur removing capacity was about 28.8 g S/100 g sorbent. Neither formation of CaSO$_4$ was observed in XRD measurement nor SO$_2$ slippage was observed during sulfidation process.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.4
• /
• pp.458-465
• /
• 2010

To investigate the growth and nutrient uptake response of sorghum${\times}$sudangrass ($S{\times}S$) hybrid to different rate of livestock manure compost, a field experiment was conducted in the experimental grassland of Chonnam National University. Six treatments were laid out in a randomized block design with triplicates; control (no input), synthetic fertilizer (20 g N $m^{-2}$ and 20 g $P_2O_5\;m^{-2}$), compost 1 (3.4 g N $m^{-2}$ and 3.6 g $P_2O_5\;m^{-2}$), compost 2 (6.8 g N $m^{-2}$ and 7.2 g $P_2O_5\;m^{-2}$), compost 4 (13.4 g N $m^{-2}$ and 14.4 g $P_2O_5\;m^{-2}$), and compost 6 (20.2 g N $m^{-2}$ and 21.6 g $P_2O_5\;m^{-2}$). Ninety days after treatment, above-ground parts of the plants were harvested and measured for dry matter yield (DMY) and amounts of nutrients (N and P) uptake. Synthetic fertilizer application achieved the greatest DMY (2.4 kg $m^{-2}$) and nutrient uptake (38.3 g N $m^{-2}$ and 15.3 g $P_2O_5\;m^{-2}$). Increasing compost application rate tended to enhance DMY accumulation and nutrient uptake (P<0.01), but DMYs of compost 4 (1.9 kg $m^{-2}$) and 6 (1.8 kg $m^{-2}$) treatments were not different. Therefore, it was suggested that application compost alone may not achieve DMY of $S{\times}S$ hybrid compatible to synthetic fertilizer application. As nutrient uptake efficiency data showed that availability of compost P could be better than SF, it might be a strategy to apply compost as P source with supplementary N application such as liquid manure, SF or green manure if necessary considering availability of N input and the yield goals.

• Proceedings of the CALSEC Conference
• /
• 1999.07a
• /
• pp.389-402
• /
• 1999

o 자금지원 : 정보화추진 소요 시설 및 운전자금 o 진단/지도 : 중소기업의 정보화추진 진단/지도 o 정보은행 : 기업의 경영, 기술에 필요한 정보제공 o 인터넷 중소기업관 : G7국가 프로젝트 참여(GIN) o S/W도서관 : 중소기업에 필요한 각종 S/W전시(중략)

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.5
• /
• pp.397-410
• /
• 1997

An annular denuder filter pack sampling system (ADS) was used to collect acidic air pollutants in Pusan. During the study period (from June 1995 to November 1995), forty eight samples were collected every 12 hours starting from 6:00 in the morning. These samples were devided into two sets of data for day (6:00 a.m.-6:00 p.m.) and night (6:00 p.m.-6:00 a.m.). The chemical species were analyzed for HN $O_3$, HN $O_2$, S $O_2$ and N $H_3$ in the gas Phase, and N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$ and N $H_4$$^{+}$ in the particulate phase. The mean concentrations measured from this study were 0.24, 1.91, 30.07 and 4.24 $\mu\textrm{g}$/㎥ for HN $O_3$, HN $O_2$, S $O_2$ and N $H_3$, respectively. The mean concentrations of N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$ and N $H_4$$^+{\ulcorner}$ were 1.95, 7.36 and 3.48 $\mu\textrm{g}$/㎥, respectively. The mean concentrations of gaseous species except for HN $O_2$ were higher in daytime than in nighttime, but the reverse was true in the particulates except for N $H_4$$^{+}$. +/..

• Nano
• /
• v.13 no.12
• /
• pp.1850148.1-1850148.9
• /
• 2018

The interconnected three-dimensional Ni-Co-S nanosheets were successfully deposited on ZnO nanorods by a one-step potentiostatic electrodeposition. The Ni-Co-S nanosheets provide a large electrode/electrolyte interfacial area which has adequate electroactive sites for redox reactions. Electrochemical characterization of the ZnO@Ni-Co-S core-shell nanorods presents high specifc capacitance (1302.5 F/g and 1085 F/g at a current density of 1 A/g and 20 A/g), excellent rate capabilities (83.3% retention at 20 A/g) and great cycling stability (65% retention after 5000 cycles at a current density of 30 A/g). The outstanding electrochemical performance of the as-prepared electrode material also can be ascribed to these reasons that the special structure improved electrical conductivity and allowed the fast diffusion of electrolyte ions.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12a
• /
• pp.196-199
• /
• 2011

In this study we synthesized mesoporous carbon supported CuO by using mesoporous silica i.e. SBA-15 as the template and cupric nitrate trihydrate ($Cu(NO_3)_23H_2O$)as copper source. The porous CuO was characterized with XRD, TGA, SEM and BET. The result reveals porous CuO has good crystal structure with uniform size of spherical crystal particles. The surface are a ($S_{BET}$) of porous CuO was found to be $153.46m^2g^{-1}$ with a total pore volume ($V_p$)of$0.1516cm^3g^{-1}$ and average pore size of 3.9 nm which was much higher than that of commercial CuO ($S_{BET}$, $7.6m^2g^{-1}$; $V_p$, $0.01cm^3g^{-1}$). The obtained porous CuO was studied for adsorption of $CO_2$and the maximum $CO_2$ adsorption capacity was found to be 67.5 mg/g of the sorbent at $25^{\circ}C$.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.2E
• /
• pp.91-97
• /
• 2002

One of the most important things in mobile phone service is Hand-Off (H/O). Meantime soft H/O and softer H/O have been used between the same generations (2G↔2G) and there is little problem. With user's needs and the development of communication technology, the system with different generation coexists and pilot beacon and time-periodic beacon are used for H/O between generations (2.5G↔2G) to start service, but it is not economic and efficient. To improve such problems, ENHHO developed in April 2001 has recently used. Unfortunately, this method also has the defect of momentary cutoff of communication information during the procedure of H/O in case of more than 5 pilot signals. Accordingly, we suggest algorithm to improve the problem of ENHHO and examines its propriety by analyzing the results of field survey using the algorithm.

• Carbon letters
• /
• v.9 no.2
• /
• pp.108-114
• /
• 2008

We have demonstrated the feasibility of using electrospinning method to fabricate long and continuous composite nanofiber sheets of polyacrylonitrile (PAN) incorporated with zinc oxide (ZnO). Such PAN/ZnO composite nanofiber sheets represent an important step toward utilizing carbon nanofibers (CNFs) as materials to achieve remarkably enhanced physico-chemical properties. In an attempt to derive these advantages, we have used a variety of techniques such as field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and high resolution X-ray diffraction (HR-XRD) to obtain quantitative data on the materials. The CNFs produced are in the diameter range of 100 to 350 nm after carbonization at $1000^{\circ}C$. Electrical conductivity of the random CNFs was increased by increasing the concentration of ZnO. A dramatic improvement in porosity and specific surface area of the CNFs was a clear evidence of the novelty of the method used. This study indicated that the optimal ZnO concentration of 3 wt% is enough to produce CNFs having enhanced electrical and physico-chemical properties.