• The Plant Pathology Journal
• /
• v.17 no.6
• /
• pp.383.4-383
• /
• 2001

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.10
• /
• pp.495-499
• /
• 2004

Characteristics of ohmic Ni/Si/Ni contacts to n-type 4H-SiC are investigated systematically. The ohmic contacts were formed by annealing Ni/Si/Ni sputtered sequentially The annealings were performed at 950℃ using RTP in vacuum ambient and N₂ ambient, respectively. The specific contact resistivity(p/sub c/), sheet resistance(R/sub s/), contact resistance (R/sub c/) transfer length(L/sub T/) were calculated from resistance(R/sub T/) versus contact spacing(d) measurements obtained from TLM(transmission line method) structure. While the resulting measurement values of sample annealed at vacuum ambient were p/sub c/ = 3.8×10/sup -5/Ω㎠, R/sub c/ = 4.9 Ω and R/sub T/ = 9.8 Ω, those of sample annealed at N₂ ambient were p/sub c/ = 2.29×10/sup -4/Ω㎠, R/sub c/ = 12.9 Ω and R/sub T/ = 25.8 Ω. The physical properties of contacts were examined using XRD 3nd AES. The results showed that nickel silicide was formed on SiC and Ni was migrated into SiC. This result indicates that Ni/Si/Ni ohmic contact would be useful in high performance electronic devices.

• Journal of Life Science
• /
• v.19 no.6
• /
• pp.765-769
• /
• 2009

Recent studies have reported that the distribution of HPV-16 sequence variation differs geographically, and more specifically that HPV-16 E6/E7 intratypic variants might carry a high risk for development of ICC (invasive cervical cancer) and CIN (cervical intraepithelial neoplasia) in a given population. To investigate the genetic diversities of HPV-16 E6/E7 oncogene by region, we collected nineteen HPV-16 isolates from sexually high-risk women in Busan, and analyzed the HPV-16 E6/E7 coding regions (nt 34 to 880) with HPV-16 E6/E7 specific PCR amplification. At the nucleotide levet eleven variants of the E6 genes and nine variants of the E7 genes were identified as follows: E6 T178G (n=l1), E6 T178A (n=l), E6 T350G (n=3), E6 A442C (n=2), E6 AI04T, E6 All1G, E6 C116T, E6 G145T, E6 T183G, E6 C335T, E6 G522C and E7 A647G (n=12), E7 A645C, E7 A777C, E7 G663A, E7 T732C, E7 T760C, E7 A775T, E7 T789C and E7 T795G, respectively. At the amino acid levet the isolated HPV-16 E6 and E7 genes showed eleven E6 variants: E6 D25E (n=12), E6 L83V (n=4), E6 E113D (n=2), E6 MIL, E6 Q3R, E6 P5S, E6 Q14H, E6 D25N, E6 127R, E6 H78Y, E6 C140S and three E7 variants: N29S (n=12), L28F, T72S. HPV16 E6 L83V, the dominant variant in the Caucasian population, showed relatively low frequencies in our study population. We elucidated that the dominant HPV-16 E6/E7 variants were HPV-16 E6 D25E (63.2%) and HPV-16 E7 N29S (63.2%), which were phylogenetically included in Asian lineage. Further study is needed to evaluate the risk of cervical cancer related HPV-16 E6/E7 intratypic variants in the Korean population.

• Food Science and Preservation
• /
• v.8 no.3
• /
• pp.320-325
• /
• 2001

In fermentation characteristics, R2 was suitable for fast start and fermentation, while UCD530 was tool suitable far complete fermentation at 25$^{\circ}C$. T73 and AC- strains produced much more total acid compared to other strains and it was concerned with producing large amount of succinic acid and acetic acid. OC-2, UCD530, Beaujolais, and BC strains revealed low fermentation efficiency (below 62.0%), but EC1118, RC212, T73 and BM45 strains showed opposit result (above 70.0%). D254 and Wadenswil 27 seemed to have excellent cohesive ability because these two yeast strains made somewhat hard precipitation at the bottom after complete fermentation. T73 and CEG gave higher amounts of acetic acid (above 630 mg/L), while UCD530, W-3 and Beaujolais recorded low concentration (below 200 mg/L). In sulfur dioxide tolerance, preferable culturing temperature and times were 25$^{\circ}C$ and 72 hr respectively. The strains R2, BM45 and L2056 revealed high sulfur dioxide tolerance (above 30mg/L), white 71B, Wadenswil 27 and Beaujolais showed the opposite result (below 5mg/L)

• Journal of applied mathematics & informatics
• /
• v.30 no.1_2
• /
• pp.161-171
• /
• 2012

We consider the fourth-order differential equation with one-dimensional $p$-Laplacian (${\phi}_p(x^{\prime\prime}(t)))^{\prime\prime}=f(t,x(t),x^{\prime}(t),x^{\prime\prime}(t)$) a.e. $t{\in}[0,1]$, subject to the boundary conditions $x^{\prime\prime}}(0)=0$, $({\phi}_p(x^{\prime\prime}(t)))^{\prime}{\mid}_{t=0}=0$, $x(0)={\sum}_{i=1}^n{\mu}_ix({\xi}_i)$, $x(t)=x(1-t)$, $t{\in}[0,1]$, where ${\phi}_p(s)={\mid}s{\mid}^{p-2}s$, $p$ > 1, 0 < ${\xi}_1$ < ${\xi}_2$ < ${\cdots}$ < ${\xi}_n$ < $\frac{1}{2}$, ${\mu}_i{\in}\mathbb{R}$, $i=1$, 2, ${\cdots}$, $n$, ${\sum}_{i=1}^n{\mu}_i=1$ and $f:[0,1]{\times}\mathbb{R}^3{\rightarrow}\mathbb{R}$ is a $L^1$-Carath$\acute{e}$odory function with $f(t,u,v,w)=f(1-t,u,-v,w)$ for $(t,u,v,w){\in}[0,1]{\times}\mathbb{R}^3$. We obtain the existence of at least one nonconstant symmetric solution by applying an extension of Mawhin's continuation theorem due to Ge. Furthermore, an example is given to illustrate the results.

• Journal of Food Hygiene and Safety
• /
• v.28 no.4
• /
• pp.349-353
• /
• 2013

This study was performed to evaluate the bactericidal efficacy of Fumagari OPP$^{(R)}$, fumigation disinfectant, containing 20% ortho-phenylphenol against Staphylococcus aureus (S. aureus). In this research, efficacy test of fumigant against S. aureus was carried out according to French standard NF T 72-281. S. aureus working culture suspension number (N value), all of the colony numbers on the carriers exposed with the fumigant (n1, n2, and n3), the number of bacterial test suspentions by pour plate method (N1), the number of bacterial test suspentions by filter membrane method (N2) and the mean number of bacteria recovered on the control-carriers (T value) were obtained from the preliminary test. In addition, the reduction number of S. aureus exposed with the fumigant (d value) was calculated using T value, the mean number of bacteria in recovery solution (n'1) and the mean number of bacteria on carriers plated in agar (n'2). N value was $4.0{\times}10^8$ CFU/mL, and n1, n2, and n3 were higher than 0.5N1, 0.5N2 and 0.5N1, respectively. Additionally, T value was $3.4{\times}10^6$ CFU/mL. In the bactericidal effect of the fumigant, the d value was 6.43 logCFU/mL. According to the French standard for the fumigant, the d value for the effective bactericidal fumigant should be over than 5 logCFU/mL. The results indicated that Fumagari OPP$^{(R)}$ had an effective bactericidal activity against S. aureus, then the fumigant can be applied to disinfect food materials and kitchen appliances contaminated with pathogenic bacteria.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2159-2161
• /
• 1997

This paper presents the investigations and the reduction methods for EMI in the Elevator(E/L) system. In the large capacity E/L. Power factor controlled IGBT converter is used, so that the conducted EMI level is mostly determined by a high frequency input current. We suggest the low cost EMI countermearsure for E/L system using by a LCL filter ed a low cost noise filter.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.6
• /
• pp.93-103
• /
• 1998

The nucleate boiling heat transfer experiments are performed using a ternary refrigerant R407C which is a candidate of alternatives of HCFC 22. The boiling phenomena of R-32, R-125 and R-134a which are the constituent refrigerants of R407C are also investigated. The nucleate boiling heat transfer coefficients of R407C are less than those of HCFC 22 which have the similar physical and transport properties. In our experimental pressure range, which is similar to the operational pressure of air conditioning system, the deterioration of boiling heat transfer coefficients of mixture refrigerant R407C does not appear for moderate wall superheat region. Since nucleate boiling heat transfer coefficients cannot be obtained from ideal mixing law of mixture, Thome's method was used to predict. To account for the heat flux effect and system pressure in Thome's method, the correcting factor, a(P.L1T), was introduced and obtained from experiments for ternary refrigerant R407C.

• Korean journal of applied entomology
• /
• v.40 no.2
• /
• pp.149-153
• /
• 2001

We surveyed on the host plants of Fungus gnat, Bradysia app. and found 21 species in the greenhouse and field. These are as follows: Cucumis sativus L., Cucumis melo L., Citrullus lanatus T., Cucurbita moschata F., Lycopersicon esculentum M., Capsicum annuum L (Pepper), Capsicum annuum L (Paprika), Lillium longiflorum T., Dianthus caryophyllus L., Rosa hybrida H., Gerbera jamesonii B., Chrysanthemum morifolium R, Phalaenopsis schilleriane R., Gladiolus grandiflours H., Zingiber officinale R., Cnidium officinale M., Canavalia gladiata DC., Angelica utilis M., Polygonatum odoratum D., Pinus densiflora S., and Pinus thunbergii P. Fungus gnat larvae cause damages to the root and promote decay and wilt by feeding on the roots and burrowing in plant tissue.

• Journal of Sensor Science and Technology
• /
• v.1 no.1
• /
• pp.23-34
• /
• 1992

In order to fabricate magnetoresistive sensor, Fe-Ni and Co-Ni alleys were evaporated on the slide glass and the silicon wafers. Saturation magnetic induction($B_{s}$), coercive field strength($H_{c}$) and magnetoresistance were measured for fabricated samples. The evaporated Fe-Ni thin films show that the saturation magnetic induction was 0.65 T, and coercive field strength was 0.379 A/cm, and this value was changed to 0.370 A/cm(//), 0.390 A/cm(${\bot}$), respectively after magnetic annealing. For the measurement of coercive field strength, magnetizing frequency of 1 kHz was used. For the fabricated sensor element, the change of magnetoresistance (${\Delta}R/R$) was excessively unstable due to oxidation in the process of fabrication. The evaporated Co-Ni alloy thin films show that saturation magnetic induction was 0.66 T, and coercive field strengthes were 5.895 A/cm(//), 5.898 A/cm(${\bot}$), respectively, after magnetic annelaing. The change of magnetoresistance(${\Delta}R/R$) was $3.6{\sim}3.7%$ of which value was excessively stable to room temperature. Fe-Ni thin film could have many problems due to large affinity in the process of fabrication of magnetoresistance sensor, but Co-Ni thin film could be a suitable material for fabrication of magnetoresistance sensor, because of its small affinity and definite magnetoresistance effects.