• Journal of KSNVE
• /
• v.10 no.3
• /
• pp.423-429
• /
• 2000

This paper investigates the use of boundary element method(BEM) to analyze the insertion loss of a noise barrier. To begin with the validity of the BEm for the analysis of noise barrier insertion loss in checked by both Lam's theoretical method and the measurements in the anechoic chamber for the scale-down models. Through simulation it is shown that using 2D BEM model is sufficient to the analysis for the barrier with large ratio of length to height. By using 2D BEM model the insertion loses are predicted for the real noise barriers in several cases which are the case that they are built parallel on both roadsides the one that there are multiple sound sources and the one that there is a gap between a concrete structure and a barrier plate.

• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.281-286
• /
• 2005

To understand fundamental characteristics of combustion in a small scale device, the effects of the momentum and heat loss on the stability of laminar premixed flames in a narrow channel are investigated by two-dimensional high-fidelity numerical simulation. A general finding is that momentum loss promotes the Saffman-Taylor (S-T) instability which is additive to the Darrieus-Landau (D-L) instabilities, while the heat loss effects result in an enhancement of the diffusive-thermal (D-T) instability. These effects are also valid in nonlinear behavior of the premixed flame. The simulations of multiple cell interactions are also conducted with heat and momentum loss effects.

• Management & Information Systems Review
• /
• v.21
• /
• pp.239-269
• /
• 2007

The purpose of this thesis is to analyze empirically the relationship between market structure, measured by Herfindahl-Hershmann Index(HHI), and financial factors, and innovation in Korean industry panel datasets for 2000-2006. Results show that debt ratio and scale of the firm has a consistent positive effect on the investment in research and development. As more scale of the firm is getting bigger, the investment in R&D decrease. Also, as more debt ratio of firm rise, the investment for innovation increase. Concentration ratio, the HHI and the classification factor of High-tech industry and Low-tech industry has a consistent positive effect on the innovation. Factors affecting the investment in research and development include market structure and characteristics of industry as well as the internal affairs of the firm.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.755-756
• /
• 2006

In this paper, We design the high performance 2D product Iterative decoder using three different external value design. We improved the external value operation in two ways to reduce the delay and speed. In this proposed operation, each design has been simulated on Matlab and MaxPlusII, and implemented on the FPGA to measure their performance.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1819-1824
• /
• 2004

The common method to improve heat transfer in Nuclear fuel rod bundle is install a mixing vane in space grid. The previous split mixing vane is guides cooling water to swirl flow in sub-channel of fuel assembly. But, this swirl flow decade rapidly after mixing vane and the effect of enhancing the heat transfer vanish behind this short region. The large scale secondary vortex flow was generated by rearranging the inclined angle direction of mixing vanes to the coordinated directions. This LSVF mixing vanes generate the most strong secondary flow vortices which maintain about 35 $D_H$ after the spacer grid and the streamwise vorticity in subchannel with LSVF mixing vane sustain two times more than that in subchannel with split mixing vane. The turbulent kinetic energy and the Reynolds stresses generated by the mixing vanes have nearly same scales but maintain twice more than previous type.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.109-110
• /
• 2008

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.132-132
• /
• 1998

Ion bombardment in the keV range is known to induce drastic chemical modifications in organic and inoranic molecular comppounds. A degrading effects in orgainc materials such as the release of ppolymer compponents and the chemistry of the iradiation pprocess have been observed. The work to be described was carried out in order to understand the irradiation effect better. The sampple(ppolyimide : Kappton ) Were irradiated by Ar+, Ne+, H+ ions and electrons (3 keV) to fluence ranging from ~1$\times$1015 to ~1$\times$1017 ions/$cm^2$ at room tempperature. The impplant was usually rastered over an area of a few $cm^2$ . These ion impplantation were carried out in an electron sppectrometer ESCA 5700 (ppHI Ltd) at a residual gas ppressure of ~5$\times$10-10 Torr. X-ray pphotoelectron sppectroscoppy(XppS) measurements were made using a monochromatized Al Kａ(1486.6 eV) excitation source. The pphotoemitted electrons were detected by hemisppherical analyser with a ppass energy of 23.5 eV. Core-level binding energies were referenced to the Fermi level. To avoid the charging effect it was used the neutralizer. We studied the irradiation effects on ppolyimide with Ar+, Ne+, He+ ions and electrons by XppS which 추 pprovide detailed information concerning the bonding-induced changes.

• Journal of the Korean Vacuum Society
• /
• v.7 no.s1
• /
• pp.57-77
• /
• 1998

Heteroepitaxial $Y_2O_3$ films were grown on a Si(111) substrate by ionized cluster beam deposition(ICBD) in ultra high vacuum, and its qualities such as crystllitnity, film stress, and morphological characteristics were investigated using the various measurement methods. The crystallinity was investigated by x-ray diffraction (XRD) and reflection high energy electron diffraction (RHEED). Interface crystallinity was also examined by Rutherford backscattering spectroscopy(RBS) channeling, transmission electron microscopy(TEM). The stress of the films was measured by RBS channeling and XRD. Surface and interface morphological characteristics were investigated by atomic force microscopy (AFM) and x-ray scattering method. Comparing the interface with the surface characteristics, we can conclude that many defects at the interface region were generated by interface reaction between the yttrium metal and SiO2 layer and by ion beam characteristic such as shallow implantation, so that they influenced the film qualities. The film quality was dominantly depended on the characteristic temperature range. In the temperature range from $500^{\circ}C$ to $600^{\circ}C$, the crystallinity was mainly improved and the surface roughness was drastically decreased. On the other hand, in the temperature range from $600^{\circ}C$ to $700^{\circ}C$, the compressive stress and film density were dominantly increased, and the island size was more decreased. Also the surface morphological shape was transformed from elliptical shape to triangular. The film stress existed dominantly at the interface region due to the defects generation.

• Korean Journal of Psychosomatic Medicine
• /
• v.11 no.1
• /
• pp.60-68
• /
• 2003

Objectives: The purpose of this study was to develop a Korean version of the Levels of Emotional Awareness Scale(LEAS-K) and to examine its validity and reliability. Methods: LEAS-K was developed from translating original LEAS into Korean. The subjects were 476 Korean medical students(322 males and 154 females). The internal consistency was evaluated with the Cronbach's alpha coefficients and 40 protocols were independently scored by two raters to confirm interrater reliability. Additionally, a Korean version of 20-item Toronto Alexithymia Scale(TAS-20K), Korean versions of the Openness to Experience Inventory(OE), the Marlowe-Crowne Scale (MCS), the Bendig short form of the Taylor Manifest Anxiety Scale(TMAS) and the Emotional Expressivity Scale(EES) were rated to evaluate concurrent validity. Results: The internal consistency measured by Cronbach's alpha was 0.81 and interrater reliability was high{r(40)=0.99}. Correlation coefficients for concurrent validity were nonsignificant with TMAS and EES. LEAS-K correlated significantly with TAS-20K{r(476)=-0.10, p<0.05}, OE {r(476)=0.10, p<0.05} and MCS {r(476)=0.10, p<0.05}. Conclusion: LEAS-K was demonstrated to have high reliability and validity.

• Journal of Technology Innovation
• /
• v.21 no.2
• /
• pp.137-167
• /
• 2013

This article estimates the scale of impact of expanding governmental fiscal expenditure for R&D investment on the private business enterprise's investment for R&D, and the relationship between business enterprise and university for expanding investment of R&D. According to my results, first, an expanding fiscal expenditure from government for R&D investment leads to increase R&D investment from business enterprise. However, an expanding expenditure from university rather leads to decrease R&D investment from business enterprise. Secondly, the crowding-out effect of expanding R&D investment from University on business enterprise's is very strong, and it is affected by structural changes such as the country's economic power, fiscal stance and cyclical volatility. Third, the more governmental expenditure on university expansive is, the stronger asymmetric relationship between business enterprise and university is, and investment sources of university from business enterprise is the main factor of this relationship. Finally, it is not easy to solve out this asymmetric relationship even through the governmental subsidy.