• 한국수학사학회지
• /
• 제30권6호
• /
• pp.353-365
• /
• 2017

In general, there is summability among the mathematical tools that are the criterion for the convergence of infinite series. Many authors have studied on the summability of infinite series, the summability of Fourier series and the summability factors. Especially, $H{\ddot{u}}seyin$ Bor had published his important results on these topics from the beginning of 1980 to the end of 1990. In this paper, we investigate the minor academic genealogy of teachers and pupils from Fourier to $H{\ddot{u}}seyin$ Bor in section 2. We introduce the $H{\ddot{u}}seyin$ Bor's major results of the summability for infinite series from 1983 to 1997 in section 3. In conclusion, we summarize his research characteristics and significance on the summability of infinite series. Also, we present the diagrams of $H{\ddot{u}}seyin$ Bor's minor academic genealogy from Fourier to $H{\ddot{u}}seyin$ Bor and minor research lineage on the summability of infinite series.

• 대한기계학회논문집B
• /
• 제38권3호
• /
• pp.197-202
• /
• 2014

촉매 변환기의 효율은 촉매 물질이 포함되어 있는 하니콤 브릭 입구의 유동장 분포와 밀접한 관계가 있다. 하니콤 브릭 표면의 유동장 분포가 균일하지 않으면 시스템의 전환 효율이 감소하고 균일한 유동장 분포를 갖는 촉매 변환기에 비해 크기가 커져 제작비용도 증가한다. 따라서 촉매 변환기의 내부유동 해석은 매우 중요하다. 본 연구에서는 변환기 내부 하니콤 브릭 사이부분과 2번째 하니콤 브릭 출구부분의 유동분포를 단축을 따라 37.8 l/s와 94.4 l/s 유동영역에서 측정하였다. 또한, 자동차 제작사에서 이루어진 전산해석 결과를 측정 결과와 비교하여 실험적으로 검증하였다. 하니콤 브릭 사이부분의 ${\upsilon}$-속도분포 측정은 다소 변화하는 유동패턴이 형성되는 것을 보여주지만 입구 반대쪽 벽 부근영역에서 음의 유동장이 형성되고 음의 속도는 감소하여 중심 부근에서는 정체현상을 보이고 계속 입구 쪽까지 지속되는 것을 보여준다. 대부분의 속도 값에서 전산해석 결과는 측정치에 비하여 크게 나타났다.

• 한국작물학회지
• /
• 제33권2호
• /
• pp.122-125
• /
• 1988

반하의 조직부위별 배양기간에 따른 단백질 및 4종의 중요 효소에 대한 전기영동적 특성이 비교연구 결과는 다음과 같다. 1. 각 조직 유내 Callus의 단백질 pattern 은 야생식물체 각 조직과 현저한 차이가 있었다. 2. 각 조직 유내 Callus의 Esterase isozyme pattern은 야생 식물체 각 조직과 뚜렷한 차이가 있었다. 3. 각 조직 유내 4주 배양 Callus의 GOT isozyme pattern은 야생식물체 각 조직과 비슷하였으나 배양 8주 Callus에서는 분자량이 큰 새로운 isozyme band 1개가 출현하였다. 4. 각 조직 유내 4주 배양 Callus의 Peroxidase isozyme band pattern 에서는 야생식물체 총 기관에서 출현했던 1개의 분자량이 작은 band 가 나타나지 않았다.

• 한국콘텐츠학회논문지
• /
• 제15권1호
• /
• pp.86-94
• /
• 2015

본 연구는 2014년 7월29일 시행된 '대중문화예술산업발전법'의 핵심인 청소년 대중문화예술인의 보호 조항의 적절성 여부를 비판적 관점에서 분석하여 미비점 등 법률 개정 방향을 모색하고자 실시되었다. 분석 결과 이 법률은 성매매 알선, 노예계약, 제3자의 수익 편취 금지 등 논란이 되어온 사회적 요구를 포괄적으로 수용하였다. 그러나 연령별로 노동시간을 차등적으로 규정하지 않은 데다 청소년에게 강요해서는 안 되는 위험한 연기장면의 사례, 수면권 건강권 학습권 보장의 절차와 방법, 위반 시 벌칙(처벌) 조항 등을 충분하게 규정하지 않아 구체성과 적용성을 충족하는 방향으로 보완이 필요한 것으로 나타났다.

• 소성∙가공
• /
• 제11권8호
• /
• pp.682-690
• /
• 2002

The formation of adiabatic shearband in tungsten heavy alloys(WHA) was studied in this investigation. Five prismatic specimens were loaded by high velocity impacts and treated as plane strain problems. To find out the effect of particle's volume ratio, specimens containing 81%, 93% and 97% volume percents of tungsten particles were used. Also the effects of particle's geometry and size on the formation of shearband were studied for 81% volume percent alloys by small size particle model, large size particle model and undulated particle models, and the results were discussed.be used to diagnose the causes of necking and fracture in industrial practice and to investigate whether these defects were caused by material property variation, changes in lubrication, or incorrect press settings. In non-axisymmetric deep drawing, three modes of forming regimes are found: draw, stretch, plane strain. The stretch mode for non-axisymmetric deep drawing could be defined when the major and minor strains are positive. The draw mode could be defined when the major strain is positive and minor strain is negative, and plane strain mode could be defined when the major strain is positive and minor strain is zero. Through experiments the draw mode was shown on the wall and flange are one of a drawn cup, while the plane strain and the stretch mode were on the punch head and the punch corner area respectively, We observed that the punch load of elliptical deep drawing was decreased according to increase of die corner radius and the thickness deformation of minor side was more large than major side.

• 미생물학회지
• /
• 제54권4호
• /
• pp.436-441
• /
• 2018

인삼은 우수한 약리 활성 작용을 보이는 전통적인 약초이다. 본 연구에는 프로바이오틱스 Lactobacillus helveticus KII13과 Pediococcus pentosaceus KID7 균주를 진세노사이드(ginsenoside) 함량을 증가시키기 위해 조 인삼 추출물을 발효시켜 진세노사이드를 형질전환 시키는데 사용되었다. 발효삼 추출물의 TLC(Thin-layer chromatography) 분석 결과, 5일간의 발효 후 주요 사포닌인 진세노사이드 Rg3, Rh1 및 Rh2로 변환되는 것으로 나타났다. HPLC 분석을 수행하여 주요 및 미량 진 세노사이드를 정량화하였다. 3일째에는 Rg3가 나타나고, 5일째에는 Rh2 및 Rh1이 나타난다. L. helveticus KII13과 P. pentosaceus KID7의 공동 배양은 주요 진세노사이드(Rb1과 Rg1)를 미량 진세노사이드(Rg3, Rh2, Rh1)로 전환시키는 것을 학인하였다.

• Nutrition Research and Practice
• /
• 제17권1호
• /
• pp.62-72
• /
• 2023

BACKGROUND/OBJECTIVES: Many studies have revealed an association between fat mass and the obesity-related gene (FTO) and obesity. On the other hand, no meta-analysis was conducted with data from only Koreans. Therefore, this study performed a meta-analysis using Korean data to provide evidence for the association between FTO single nucleotide polymorphisms (SNPs) and the risk of obesity among Korean adults. SUBJECT/METHODS: Meta-analysis was finally conducted with data extracted from seven datasets of four studies performed on Korean adults after the screening passed. Five kinds of FTO SNPs (rs9939609, rs7193144, rs9940128, rs8050136, and rs9926289) were included, and the relationship between FTO SNPs and body mass index (BMI) was investigated using linear regression with an additive model adjusted for covariants, such as age, sex, and area. RESULTS: The minor alleles of FTO SNPs were associated with increased BMI (odds ratio [OR], 1.31; 95% confidence interval [CI], 1.21-1.42). In sub-group analysis, FTO rs9939609 T>A was significantly associated with BMI (OR, 1.23; 95% CI, 1.06-1.42). The other FTO SNPs together were significantly associated with BMI (OR, 1.37; 95% CI, 1.25-1.49). The publication bias was not observed based on Egger's test. CONCLUSIONS: This meta-analysis showed that minor alleles in the FTO SNPs were significantly associated with an increased BMI among Korean adults. This meta-analysis is the first to demonstrate that minor alleles in the FTO SNPs contribute significantly to the increased risk of obesity among Korean adults using data from a Korean population.

• Archives of Plastic Surgery
• /
• 제44권3호
• /
• pp.210-216
• /
• 2017

Background In treating minor-form or microform cleft lip, obtaining an optimal result is a challenge because of the visible scarring caused by traditional surgery. We present a refined method using muscle overlapping with a minimal skin incision in patients younger than 3 years, a group characterized by thin muscle. Methods The surgical technique involves restoration of the notched vermillion using Z-plasty, formation of the philtral column using overlapping of an orbicularis oris muscle flap through an intraoral incision, and correction of the cleft lip nasal deformity using a reverse-U incision and V-Y plasty. A single radiologist evaluated ultrasonographic images of the upper lip. Results Sixty patients were treated between September 2008 and June 2014. The age at the time of operation ranged from 6 to 36 months (mean, 26 months). The follow-up period ranged from 8 to 38 months (mean, 20 months) in minor-form cases and from 14 to 64 months (mean, 37 months) in microform cases. A notched cupid's bow was corrected in 10 minor-form cases and 50 microform cases. Ultrasonographic images were obtained from 3 patients with minor-form cleft lip and 9 patients with microform cleft lip 12 months after surgery. The average muscle thickness was 4.5 mm on the affected side and 4.1 mm on the unaffected side. Conclusions The advantages of the proposed procedure include the creation of an anatomically natural philtrum with minimal scarring. This method also preserves the continuity and function of the muscle and provides sufficient augmentation of the philtral column and nostril sill.

• 한국해양공학회지
• /
• 제21권4호
• /
• pp.34-37
• /
• 2007

The safety of ships is one of the most important concerns in terms of the environment and human life. A ship in bad condition is likely to be subject to accidents, such as collision and grounding. When a ship has minor collision damages in the form of circle or ellipse, its ultimate strength will be reduced. It is important to evaluate the reduction ratio of a ship's ultimate strength that results from damages. The strength reduction of a plate with a cutout in the form of hole has been treated by many researchers. A closed-form formula for the reduction of ultimate strength of a plate, considering the effect of several forms of cutout, has been suggested. However, the structure of ships is composed of plates and stiffeners so-called stiffened plates and it is likely that plates and stiffeners will be damaged together in collisions. This paper investigates the effect of minor collision damages on the ultimate strength of a stiffened plate by using numerical analysis. For this study, the deformed shape of minor collision damages on a stiffened plate was made by using a contact algorithm and was used as the initial shape for ultimate stress analysis. Then, a series of nonlinear FE analyses was conducted to investigate the reduction effects on the ultimate strength of the stiffened plate. The boundary conditions were simply supported at all boundaries, and the tripping of stiffener was neglected. The results are presented in the form of reduction ratio between the ultimate strength of an original, intact stiffened plate and that of a damaged stiffened plate.

• 대한통합의학회지
• /
• 제7권3호
• /
• pp.149-157
• /
• 2019

Purpose : This study aims to check the relationship between the size of curvature in scoliosis patients and the reduction rate of curvature after wearing a brace and the relationships of the size of curvature and correction angle with Body Mass Index (BMI). Methods : With 30 adolescent girls who had never worn a brace, their Cobb angle and BMI were measured before manufacturing braces, and their corrected Cobb angle was measured after wearing the manufactured scoliosis braces. Results : The size of the major curvature before wearing the brace and the reduction rate of the curvature after putting it on had a negative correlation in both the major curvature (r=-.465, p<.01) and the minor curvature (r=-.516, p<.01). The size of the minor curvature and the reduction rate of the minor curvature before and after putting it on also had a negative correlation (r=-.429, p<.05). As for the relationship between the size of curvature and BMI, they had a negative correlation in both the major curvature (r=-.141) and the minor curvature (r=-.123), and as for the relationship between the reduction rate of curvature and BMI after wearing the brace, they had a positive correlation in both the major curvature (r=.251) and the minor curvature (r=.136); however, it was not statistically significant (p>.05). Conclusion : In conclusion, the larger the size of curvature, the lower the reduction rate of curvature after wearing the brace became. The larger the size of curvature, the lower the BMI became. The higher the BMI, the higher the correction ratio of the brace became. Therefore, it is judged that it is necessary to provide early treatment and manage body composition before scoliosis progresses.