• 대한치과보철학회지
• /
• 제58권1호
• /
• pp.23-29
• /
• 2020

목적: 이번 후향적 연구의 목적은 수압을 이용하는 방식을 변형한 방식인 S-reamer 와 겔 형태의 이식재를 이용한 상악동 거상술을 시행한 임플란트의 5년 이상 추적 관찰을 함으로써 성공률과 생존률을 조사하여 이 술식에 대한 평가를 하는데 있다. 재료 및 방법: 2008년에서 2014년까지 환자들을 추적 관찰하였다. 관찰된 환자는 59명이었고 식립 임플란트는 117개였다. 남성 34명, 여성 25명이고 연령대는 다양하였다. 잔존 수직 골의 골 량은 1 - 6 mm로 다양하였다. 상악동 거상술은 막의 천공없이 상악동을 천공하는데 S-reamer를 사용하였고 막을 거상하는데 겔 형태의 이식재를 사용하여 상악동 거상술을 시행하였다. 모든 임플란트는 거상과 동시에 식립하였고 5 - 6개월 치유 기간 후 보철물을 장착하였다. 방사선 검사는 추적 검사 할 때와 식립 후 바로 찍은 방사선 검사를 비교하였다 그리고 탐침을 통하여 화농여부, 염증여부, 출혈여부 등등 임상 검사를 통하여 검진 평가 하였다. Buser의 성공 기준을 참고하였고 모든 임플란트를 성공 임플란트, 생존 임플란트, 실패 임플란트로 분류하였다. 결과: 실패하여 제거한 임플란트는 5개였고 골 소실을 동반한 급성 염증 치료를 했거나 염증을 보인 임플란트가 4개였다. 생존율은 95.7%이고 성공률은 92.3%였다. 결론: S-reamer와 겔 형태의 이식재를 이용한 상악동 거상술이 1 - 6 mm 잔존 골이 있는 상황에서 막 천공이 없이 상악동을 거상할 수 있는 성공적인 술식임을 알 수 있었다.

• 대한관절경학회지
• /
• 제14권1호
• /
• pp.33-35
• /
• 2010

This is a case of the core reamer breakage during anterior cruciate ligament reconstruction using bone-patellar tendon-bone autograft. A 19-year-old man with acute anterior cruciate ligament rupture had reconstruction surgery. During tunneling in the proximal tibia, the core reamer have been cracked open and broken. Rest of the procedure was performed routinely except the tibial sided fixation of bone block which was performed with larger interference screw than usual. The patient followed the accelerated rehabilitation program. The result was satisfactory at 2 years after surgery.

• 대한관절경학회지
• /
• 제1권1호
• /
• pp.123-127
• /
• 1997

Arthroscopic anterior cruciate ligament reconstructions using bone-patella tendon-bone have been considered the best method by which others are compared. The notchyplasty is one of the important steps of this procedure and it is emphasized recently to prevent retear of the reconstructed ACL caused by impingement. However, until now, there is controversy about adequate amount of notchyplasty. Also, it is hard to examine the adequacy of notchyplasty even in the arthroscopic field, The purpose of this paper is to describe the surgical technique of notchyplasty, using the flexible reamer and preliminary result of its operation. In this study the results of ACL reconstruction with notchyplasty which is made by us were analized from January. 1994 to December, 1995. The results were as follows: 1. The notchyplasty with flexible reamer is the method that can be obtained adequate amount of removal, perfectly smooth notchyplasty. 2. The range of motion of the affected knee joint was normal ROM after post operation 6 month. 3. In the last follow up, 2 cases were positive in anterior drawer test 4 cases were positive in Lachmann's test and 1 knee was positive in Pivot shift test 4. Average Lysholm knee scoring scale was 70 points at preoperative and 92 points at the last follow up.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.9-10
• /
• 2006

본 논문은 기존 Reamer Bolt 사용시 발생하는 여러 가지 문제점를 해결하고 고가의 수입품을 대체하기 위한 유압식 커플링 볼트의 국산화를 소개하였다.

• Restorative Dentistry and Endodontics
• /
• 제10권1호
• /
• pp.193-198
• /
• 1984

This study was conducted to compare the chip removal capability of root canal enlarging instruments. Fifty five buccal or mesial canals from upper and lower molar teeth were randomly selected and divided into three groups; Reamer, K-type file and K-flex file. Fifteen canals in each group were individually enlarged with one of three tested instruments and irrigated with 5cc of normal saline solution. After instrumentation, each canal was dried with paper point and the canal was splited longitudinally and the cleanness of root canal surface was evaluated under stereoscope by three observers. The results were as follows; 1. Most of the canals experimented showed varying degree of the presence of debris. 2. The canals prepared with reamers showed the most clean canal surface. 3. There was no significant difference in debridement effect between k-type file and k-flexfile.

• 대한치과의사협회지
• /
• 제15권8호
• /
• pp.611-615
• /
• 1977

The author observed histochemically the nature of the calcified tissue in the rabbit dental pulp, induced by pulpal injection of potassium permanganate. The pulp of rabbit mandibular incisors were exposed and enlarged by a dental hand reamer. The exposed pulps were injected with 0.05ml of 20mM solution of potassium permanganate dissolved in Ringer's solution in experimental tooth. Also the control tooth received a pulpal injection of 0.05ml of Ringer's solution. After pulpal injection, the tooth was plugged with a gutta-percha root canal point. The staining techniques were hematoxylin-eosin stain, van Gieson stain, PAS reaction, toluidine blue stain, alcian blue-hematoxylin stain and colloidal iron-picric acid stain. The results were as follows: 1. The pulp on experimental tooth showed osteodentin-like calcified tissue. Also, in some areas, false denticle-like substance were observed. 2. The central portion of the calcified matrix showed metachromasia in toluidine blue stain had strong staining capacity in alcian blue stain. 3. The peripheral portion of the calcified tissue revealed marked van Gieson positive reaction for collagen. But their staining ability in alcian blue was slight and metachromasia was not appeared.

• Restorative Dentistry and Endodontics
• /
• 제1권1호
• /
• pp.34-38
• /
• 1975

Artificial canals were prepared by means of engine reamer on the slab which was made of clear acrylic resin. The shape of this canal is similar to the natural canal, the size is almost same as Kerr File No. 70, and the length is about 20mm. Sealer, Zine oxide eugenol mixture was prepared as matched to spatula test. Lentulo filler was inserted as deep as middle portion and apical one-third portion of the canal and the dental engine was driven in the speed of 1,000 and 3,000 r.p.m. in 30 seconds and 60 seconds with feeding of the sealer. The author measured the excess flow of the canal sealer from Lentulo end. Following are the results obtained from this study. 1. Lentulo insertion at the middle portion 1,000 r.p.m. in 30 seconds case: 0.21mm Same as above in 60 seconds: 0.20mm 2. Lentulo insertion at apical-thirds. 1,000 r.p.m. in 30 seconds: 0.22mm. Same as above in 60 seconds: 0.20mm. 3. Lentulo insertion at middle portion. 3,000 r.p.m. in 30 seconds: 0.14mm Same as above in 60 seconds: 0.25mm. 4. Lentulo insertion at apical-thirds, 3,000 r.p.m. in 30 seconds: 0.11mm Same as above in 60 seconds: 0.27mm.

• 한국치위생학회지
• /
• 제7권3호
• /
• pp.213-230
• /
• 2007

The purpose of this study was to examine the state of infection control provided to members of Korean Dental Hygienists Association. The subjects in this study were dental hygienists who attended a symposium on July 1. 2006. after a survey was conducted, the answer sheets from 489 participants were analyzed, and the findings of the study were as follows: 1. Possession of disinfection room was being(72.7%), and person of infection control was zero(52.9%). Number of sterilizer was one(62.2%). 2. As a repetition choice, type of sterilizer was autoclave(97.9%), UV sterilizer(67.4%) and EO gas sterilizer(21.4%). As a repetition choice, infection materials was ethanol(84.1%). 3. Water tube of unit and chair was using of sterilized water(42.9%). Sterilizing of compressed air was no(69.0%). 4. Re-using of disposal was not using(62.5%), re-using disposal was suction tip(28.2%)(repetition choice) 5. In sterilization of instruments, hand-piece was every using time(28.4%), and reamer-file, bur, mirror, pincette, explorer, hand scaler and ultrasonic scaler were high in every using time. 6. Individual protection was high of using, cleaning of hands before treatment was every treatment(87.0%). Type of soap was liquid type in dental clinic(48.2%), infection soap in dental hospital(41.2%) and solid soap in public health center(50.6%). Answered that they need regular oral health education, and 82.9% respondents answered that they need oral health technicians in school. And 87.8% respondents needed individual oral health education for the benefit of better oral health.

• Hip & pelvis
• /
• 제30권4호
• /
• pp.269-275
• /
• 2018

Purpose: The purpose of this study is to describe a method of inserting cement in the femoral head before fixation with dynamic hip screw to prevent screw cut out due to osteoporosis and to evaluate its clinical outcome in these patients. Materials and Methods: In this prospective study, 30 patients aged 60 years and older with intertrochanteric fracture were included. Bone mineral density was measured. After reaming of the femoral head and neck with a triple reamer and polymethyl methacrylate, bone cement was introduced into the femoral head using a customized nozzle and a barrel fitted on a cement gun. A Richard screw was inserted and the plate was fixed over the femoral shaft. Patients were mobilized and clinical outcomes were rated using the Salvati and Wilson's scoring system. Results: More patients included in this study were between 66 and 70 years old than any other age group. The most common fracture according to the Orthopaedic Trauma Association classification was type 31A2.2 (46.7%). The T-score was found to be $-2.506{\pm}0.22$ (mean${\pm}$standard deviation); all patients were within the range of -2.0 to -2.8. The duration of radiological union was $13.67{\pm}1.77$ weeks. Salvati and Wilson's scoring at 12 months of follow up was $30.96{\pm}4.97$. The majority of patients were able to perform their normal routine activities; none experienced implant failure or screw cut out. Conclusion: Bone cement augmentation may effectively prevent osteoporosis-related hardware complications like screw cut out in elderly patients experiencing intertrochanteric fractures.

• Restorative Dentistry and Endodontics
• /
• 제16권2호
• /
• pp.143-154
• /
• 1991

The purpose of this study was to evaluate the sealing ability of five obturation methods in conjunction with sealer. Fifty extracted upper and lower anterior teeth were selected and the access cavities were prepared lingually with a round bur. The working length was determined with a #15K file, and the root canals were instrumented with a #40K file 1mm short of the apical foramen. The apical third of root canal was flared by step-back technique and the coronal two thirds of root canal using #2 - 3 Gates Glidden drills. And then, the teeth were randomly assigned to five groups of 10 teeth each. A thin coat of Tubliseal was placed into the canal into the canal using the # 35 reamer and the canals were filled by lateral condensation, vertical condensation, ultrasonic activated lateral condensation, ULTRAFIL injecting, and McSpadden compaction methods. All teeth were stored in 100 % relative humidity at 31c for 48 hours. The roots were suspended in 2 % methylene blue solution for 48 hours, left to dry for 24 hours and then, half side of root was removed longitudinally using the fissure bur. A Boley gauge wes used to measure the distance, to the nearest 0.1mm, from the apical foramen to the most coronal level of dye penetration. The measurement of dye penetration was statistically compared by Duncan's multiple range test The results were as follows 1. Ultrasonic group showed the best sealing ability among the all experimental groups, but there were statistically no significant difference in the sealing ability between ultrasonic group and vertical condensation group. 2. There were no statistically significant difference in the sealing ability among the lateral, vertical, and ultrasonic groups. 3. McSpadden group showed the worst sealing ability among the all exprimental groups.