• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.5
• /
• pp.861-867
• /
• 2000

The feasibility of simultaneous phosphorus and nitrogen removal by enhancing anoxic phosphorus uptake was investigated in a sequencing batch reactor (SBR). By introducing an anoxic phase into an anaerobic-aerobic SBR (AO SBR), significant amounts of denitrifying phosphorus accumulating organisms (DPAOs) which can utilize nitrate as electron acceptor could be accumulated in the reactor (anaerobic-aerobic- anoxic-aerobic SBR, $(AO)_2$ SBR). A direct comparison of phosphorus uptake rate under anaerobic and aerobic conditions showed that the fraction of DPAOs in P-removing sludge were increased from 10% in the AO SBR to 64% in $(AO)_2$ SBR. The $(AO)_2$ SBR showed stable phosphorus and nitrogen removal efficiency: average removal efficiencies of TOC, total nitrogen, and phosphorus were 92%, 88%, and 100%. respectively. Results of the $(AO)_2$ SBR operation and batch tests showed that nitrite (up to 10 mg-N/L) was not detrimental to anoxic phosphorus uptake and could serve as good electron acceptor like nitrate.

• Advances in Traditional Medicine
• /
• v.10 no.4
• /
• pp.304-309
• /
• 2010

Scutellaria pinnatifida A. Hamilt. (Lamiaceae) is an endemic Turkish herb. This plant is also endemic to Iran, and grows abundantly in other central and western Asian countries. Several species of the Scutellaria are known for their traditional uses in the treatment of hypertension, arteriosclerosis, inflammatory diseases, hepatitis, allergy, cancer and diarrhoea. Free-radical-scavenging property, antibacterial activity and brine shrimp toxicity of the n-hexane, dichloromethane (DCM) and methanol (MeOH) extracts of S. pinnatifida were assessed using the 2,2-diphenyl-1-picryl-hydrazyl (DPPH) assay, the resazurin microtitre plate based assay, and the brine shrimp lethality assay, respectively. The DCM and MeOH extracts exhibited free-radical-scavenging property, with the $RC_{50}$ values of 0.362 and 0.127 mg/ml, respectively. Among the solid-phase extraction fractions of the MeOH extract, the 50% aqueous-MeOH fraction showed the highest level of free-radicalscavenging activity ($RC_{50}$ = 0.039 mg/ml). While the DCM extract showed low level of antibacterial activity against Bacillus subtilis and ampicillin-resistant Escherichia coli, the MeOH extract was active against B. cereus, B. subtilis, E. coli and ampicillin-resistant E. coli. However, the minimum inhibitory concentrations (MIC) of the MeOH extract against these bacterial strains were >10 mg/ml. None of the extracts showed any significant toxicity towards brine shrimps ($LD_{50}$ = > 1.00 mg/ml).

• Journal of Korean Critical Care Nursing
• /
• v.7 no.1
• /
• pp.11-23
• /
• 2014

Purpose: As the number of cases of heart transplantation (HT) and the survival rate have increased, concerns regarding post-HT life have grown. This study was conducted to explore the relationships of perceived social support to the depression and health status of HT recipients. Methods: This descriptive study targeted all recipients who had undergone HT at S University Hospital since 1994, and 32 recipients were recruited. Results: 90.6% of the recipients were men, and the average age at the time of surgery was $47.4{\pm}13.4$ years. The ejection fraction was increased from $18.47{\pm}5.63%$ to $63.25{\pm}7.57%$, and 31 cases of New York Heart Association (NYHA) class III and IV improved to class I or II after HT. The patients reported mild depression even with high perceived social support and improved health status after HT. Among those resource persons who offered support, they reported their spouse, doctors, and nurses as most meaningful to them. Conclusion: This study confirmed the positive effects of HT on the recipients' physical improvement. It also added the discovery that the importance of recipients' subjective perception of social support might be critical for their more successful recovery and adjustment to post-HT life. Focusing on a different approach to social support and types of social resources in the recovery phase is suggested for future studies on quality of life after HT.

• Journal of the Korean Magnetics Society
• /
• v.12 no.2
• /
• pp.57-63
• /
• 2002

In order to increase the magnetic properties of a Nd-Fe-B sintered magnet, the general factors including particle size and its distribution, volume fraction of Nd$_2$Fe$_{14}$B phase, degree of alignment of Nd$_2$Fe$_{14}$B grain, oxygen content and grain size etc. should be optimized by controlling the composition of Nd-Fe-B alloy as well as the manufacturing process. In this study, fabrication of the Nd-Fe-B sintered magnet was carried out in a laboratory scale by controlling the composition of Nd-Fe-B alloy and the manufacturing process. The optimum milling condition was found by investigating the milling media, milling time and ball size. The addition of FeGa was effective to increase the coercivity of the Nd-Fe-B sintered magnet. A remanence of 14.4 kG, a coercivity of 9.4 kOe and a maximum energy product of 47 MGOe were obtained from the sintered magnet.

• Nuclear Engineering and Technology
• /
• v.44 no.7
• /
• pp.727-734
• /
• 2012

A new advanced safety feature of DVI+ (Direct Vessel Injection Plus) for the APR+ (Advanced Power Reactor Plus), to mitigate the ECC (Emergency Core Cooling) bypass fraction and to prevent switching an ECC outlet to a break flow inlet during a DVI line break, is presented for an advanced DVI system. In the current DVI system, the ECC water injected into the downcomer is easily shifted to the broken cold leg by a high steam cross flow which comes from the intact cold legs during the late reflood phase of a LBLOCA (Large Break Loss Of Coolant Accident)For the new DVI+ system, an ECBD (Emergency Core Barrel Duct) is installed on the outside of a core barrel cylinder. The ECBD has a gap (From the core barrel wall to the ECBD inner wall to the radial direction) of 3/25~7/25 of the downcomer annulus gap. The DVI nozzle and the ECBD are only connected by the ECC water jet, which is called a hydrodynamic water bridge, during the ECC injection period. Otherwise these two components are disconnected from each other without any pipes inside the downcomer. The ECBD is an ECC downward isolation flow sub-channel which protects the ECC water from the high speed steam crossflow in the downcomer annulus during a LOCA event. The injected ECC water flows downward into the lower downcomer through the ECBD without a strong entrainment to a steam cross flow. The outer downcomer annulus of the ECBD is the major steam flow zone coming from the intact cold leg during a LBLOCA. During a DVI line break, the separated DVI nozzle and ECBD have the effect of preventing the level of the cooling water from being lowered in the downcomer due to an inlet-outlet reverse phenomenon at the lowest position of the outlet of the ECBD.

• Geomechanics and Engineering
• /
• v.22 no.4
• /
• pp.361-374
• /
• 2020

This paper is concerned with the thermoelastic bending of FG beams resting on two-layer elastic foundations. One of these layers is Winkler springs with a variable modulus while the other is considered as a shear layer with a constant modulus. The beams are considered simply supported and subjected to thermo-mechanical loading. Temperature-dependent material properties are considered for the FG beams, which are assumed to be graded continuously across the panel thickness. The used theories contain undetermined integral terms which lead to a reduction of unknowns functions. Several micromechanical models are used to estimate the effective two-phase FG material properties as a function of the particles' volume fraction considering thermal effects. Analytical solutions for the thermo-mechanical bending analysis are obtained based on Navier's method that satisfies the boundary conditions. Finally, the numerical results are provided to reveal the effect of explicit micromechanical models, geometric parameters, temperature distribution and elastic foundation parameters on the thermoelastic response of FG beams.

• Journal of the Korean Vacuum Society
• /
• v.12 no.2
• /
• pp.130-135
• /
• 2003

Polycrystalline silicon thin films have been used for low cost thin film device application. However, it was very difficult to fabricate high performance poly-Si at a temperature lower than $600^{\circ}C$ for glass substrate because the crystallization process technologies like conventional solid phase crystallization (SPC) require the number of high temperature (600-$1000^{\circ}C$) process. The objective of this paper is to grow poly-Si on flexible substrate using a rapid thermal crystallization (RTC) of amorphous silicon (a-Si) layer and make the high temperature process possible on molybdenum substrate. For the high temperature poly-Si growth, we deposited the a-Si film on the molybdenum sheet having a thickness of 150 $\mu\textrm{m}$ as flexible and low cost substrate. For crystallization, the heat treatment was performed in a RTA system. The experimental results show the grain size larger than 0.5 $\mu\textrm{m}$ and conductivity of $10^{-5}$ S/cm. The a-Si was crystallized at $1050^{\circ}C$ within 3min and improved crystal volume fraction of 92 % by RTA. We have successfully achieved a field effect mobility over 67 $\textrm{cm}^2$/Vs.

• Transactions of Materials Processing
• /
• v.8 no.3
• /
• pp.247-247
• /
• 1999

The segregation (distribution) of nickel and the composition of its constituents influence the low thermal expansion characteristics (Invar effect) in Fe-30 wt.% Ni-12.5 wt.% Co-xC Invar alloy. The change of coefficient of the thermal expansion and magnetic properties were studied as an aspect of carbon addition causing the segregation of Ni in primary austenite of as-cast Fe-30 wt.% Ni-12.5 wt.% Co Invar alloy. The coefficient of thermal expansion of Fe-30 wt.% Ni-12.5 wt.% Co-xC Invar alloy showed its lowest value at 0.08 wt.% carbon, increased with increasing carbon content in the range of 0.08-1.0 wt.%C, kept constant at 1.0-2.0 wt.%C and decreased at carbon higher than 2.0 wt.%. The effective distribution of the coefficient of nickel in as-cast Fe-30 wt.% Ni-12.5 wt.% Co-xC Invar alloy increased with increasing carbon content. The volume fraction of they phase of Fe-30 wt.% Ni-12.5 wt.% Co-xC alloy increased with increasing carbon content. The microstructure of Fe-30 wt.% Ni-12.5 wt.% Co-xC alloy changed with the carbon content was independent of the coefficient of thermal expansion. The Curie temperature changed linearly with the carbon content and was similar to the change of the coefficient of thermal expansion. Moreover, the coefficient of thermal expansion decreased when the ratio of saturation magnetization to Curie temperature ($\sigma_s/T_c$) increased, decreasing the Curie temperature and showed a specific relationship with the magnetic properties of the Fe-30 wt.% Ni-12.5 wt.% Co-xCInvar alloy.

• Korean Journal of Head & Neck Oncology
• /
• v.10 no.2
• /
• pp.102-105
• /
• 1994

The indolent course of most thyroid papillary carcinomas, even the presence of regional lymph node metastasis, make them unique among human malignant head and neck cancers. Age, sex, extracapsular invasion and anaplastic change are known to be correlated with prognosis. The purpose of this study is to clarify the significance of DNA content analysis as a prognostic factor. Twenty five thyroid papillary carcinomas were possible to be examined by flow cytometric analysis using fresh surgical specimens and three nodular hyperplasias and seven follicular adenomas were included as control group. The results were as follows: l) All of twenty five thyroid papillary carcinomas showed diploidy. 2) S-phase fraction was $1.94{\pm}2.77%$ in normal control group and $2.60{\pm}2.66%$ in papillary carcinoma group. The proliferation index was $8.44{\pm}3.89%$ in normal control and $7.70{\pm}3.63%$ in papillary carcinoma group with even low value. 3) Age, sex, extracapsular spread and lymph node metastasis showed no significant difference. In conclusion, low proliferative activity of thyroid papillary carcinomas are thought to be related with good prognosis.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.3
• /
• pp.301-307
• /
• 2015

Phlorotannins and marine algal polyphenols, including dieckol, 6,6-bieckol, phloroglucinol, phlorofucofuroeckol-A, and eckol, were isolated from brown seaweeds. These compounds have beneficial bioactivities, and Ecklonia cava has become widely used for the extraction and isolation of phlorotannins. Eckol, in particular, has been to shown to have antioxidant, anti-inflammatory, anticoagulatory, and photoprotective properties. However, due to its low abundance in weaweed, the isolation and purification of eckol are difficult. Its limited availability renders the isolation and purification of eckol labor-intensive processes. Centrifugal partition chromatography (CPC) is an efficient technique for the isolation and purification of eckol. In this study, eckol was isolated from the ethyl acetate fraction of the 70% ethanol extract of E. cava using CPC with a two-phase solvent system of a n-hexane:EtOAc:methanol:water (2:8:3:7, v/v) solution. The purity and anti-inflammatory activity of the isolated eckol were verified by high-performance liquid chromatography and by assaying lipopolysaccharide-induced inflammatory responses in an immortalized murine BV2 microglial cell line, respectively. In conclusion, CPC is a useful technique for simple and efficient isolation of eckol from E. cava.