• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.265-267
• /
• 2003

The wavelet transform(WT) has been extensively applied in solving many problems in applied science and engineering following its introduction in early 1980's. The WT analyzes a signal in a changeable frequency range by employing a moving window whereby along time window is used to obtain low frequency information and short time window is used to obtain high frequency information. In this paper, after various fault types in 154 KV transmission system was simulated by using EMTP, and the RMS values by changing Mother wavelet was calculated by applying wavelet transform to the simulated voltage and current signal.

• 제어로봇시스템학회논문지
• /
• 제6권7호
• /
• pp.551-558
• /
• 2000

In this paper a systematic approach to automatic classificationi of power system harmonic disturbances is proposed where the proposed approach consists of the following three steps:(i) detecting and localizing each harmonic disturbance by applying discrete wavelet transform(DWT) (ii) extracting an efficient feature vector from each detected disturbance waveform by utilizing FFT and principal component analysis (PCA) along with Fisher's criterion and (iii) classifying the corresponding type of each harmonic disturbance by recognizing the pattern of each feature vector. To demonstrate the performance and applicability of the proposed classification procedure some simulation results obtained by analyzing 8-class power system harmonic disturbances being generated with Matlab power system blockset are also provided.

• 전자공학회논문지S
• /
• 제35S권5호
• /
• pp.59-67
• /
• 1998

This paper propose a new vector-quantizer design method for coefficients of wavelet transformed images. In conventional wavelet transform, it is quite often to employ wavelet transformed coefficients, not containing images to be encoded, as training sequences for designing a vector-quantizer. This method has a serious drawback ; it is not known how to find a proper set of training images. This paper investigates characteristics of images that should be considered in the design of vector-quantizers for wavelet transformed images. Besides the statistical parameters such as correlation and standard deviation, edge components are shown to characterise wavelet transform images. Training sequences established in accordance with the above knowledge are used in the design of quantizers having guaranteed range of applicable images. Results of computer simulations are shown to demonstrate the effectiveness of the proposed method.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1999년도 KOBA 방송기술 워크샵 KOBA Broadcasting Technology Workshop
• /
• pp.69-76
• /
• 1999

This paper proposes a new region-oriented coding scheme of still images. The scheme first segments an image into homogeneous regions by making use of Voronoi diagrams. Then luminance components in each Voronoi region are encoded using a transform coding technique which employs the Schmidt's orthogonalization method to produce orthonormal basis-functions for arbitrarily shaped regions. In this technique, coding efficiency depends on the properties of initial vectors to be orthogonalized. Therefore we adaptively select a set of initial vectors as well as the order in which these vectors are orthogonalized. Simulation results indicate that the proposed coding scheme achieves higher coding performance with much less computation than the KLT-based scheme which we reported formerly.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.14-16
• /
• 2004

A DC railway system has low feeder voltage, The remote fault current can be smaller than the current of load starting. So it is important to discriminate between the small fault current and the load starting current. The load starting current increases step by step but the fault current increases all at once. As for the load starting current, the time constant of load current at each step is much smaller than that of the fault current. To detect faults in DC railway systems, an algorithm using the time constant calculated by the method of least squares was presented. But, It have a weakness about harmonic to calculate time constant. So in this paper, new protection algorithm for DC railway systems using estimation of time constant based on fourier transform was presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.214-216
• /
• 2004

Power quality has become concern both utilities and their customers with wide spread use of electronic and power electronic equipment. This paper deals with the use of a multiresolution analysis and a discrete wavelet transform to detect interruption, sag, swell, transients and etc. The simulation system is constructed by using PSCAD/EMTDC. To show the effectiveness of the proposed method, a various case studies are simulated.

• International Journal of Reliability and Applications
• /
• 제16권1호
• /
• pp.27-34
• /
• 2015

Based on increasing concave ordering a new class of life distribution is introduced. The new class of life distribution is named used better than aged in increasing concave ordering and is denoted by UBAC(2). The implication of our proposed class of life distribution with other classes is given. The properties of UBAC(2) under convolution, discrete mixture and formation of a coherent system are studied. Finally a characterization of the proposed class of life distributions by Laplace transform is discussed.

• Steel and Composite Structures
• /
• 제25권2호
• /
• pp.177-186
• /
• 2017

In this work, the model of magneto-thermoelasticity based on memory-dependent derivative (MDD) is applied to a one-dimensional thermal shock problem for a functionally graded half-space whose surface is assumed to be traction free and subjected to an arbitrary thermal loading. The $Lam{\acute{e}}^{\prime}s$ modulii are taken as functions of the vertical distance from the surface of thermoelastic perfect conducting medium in the presence of a uniform magnetic field. Laplace transform and the perturbation techniques are used to derive the solution in the Laplace transform domain. A numerical method is employed for the inversion of the Laplace transforms. The effects of the time-delay on the temperature, stress and displacement distribution for different linear forms of Kernel functions are discussed. Numerical results are represented graphically and discussed.

• ETRI Journal
• /
• 제36권3호
• /
• pp.479-489
• /
• 2014

This paper presents a model-based image steganography method based on Watson's visual model. Model-based steganography assumes a model for cover image statistics. This approach, however, has some weaknesses, including perceptual detectability. We propose to use Watson's visual model to improve perceptual undetectability of model-based steganography. The proposed method prevents visually perceptible changes during embedding. First, the maximum acceptable change in each discrete cosine transform coefficient is extracted based on Watson's visual model. Then, a model is fitted to a low-precision histogram of such coefficients and the message bits are encoded to this model. Finally, the encoded message bits are embedded in those coefficients whose maximum possible changes are visually imperceptible. Experimental results show that changes resulting from the proposed method are perceptually undetectable, whereas model-based steganography retains perceptually detectable changes. This perceptual undetectability is achieved while the perceptual quality - based on the structural similarity measure - and the security - based on two steganalysis methods - do not show any significant changes.

• 호남수학학술지
• /
• 제34권4호
• /
• pp.505-512
• /
• 2012

In this paper, we give some properties on submodule transforms.