• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.417-419
• /
• 1995

Polymer-coated piezoelectric crystals were applied to analyze response characteristic of organic gases. AT-cut quartz crystal with 9 MHz resonant frequency can measure mass of 1 nanogram. Flow type gas-sensing system was used in this experiment. Flow type gas-sensing system has very simple apparatus and shows very fast frequency response for injection of organic gas. We have made parameter using relaxation ratio of frequency response for organic gas. Consequently, we found that the parameter had no relation with quantity of gas injection and dipping.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.5
• /
• pp.63-70
• /
• 1993

In 1980's to 1990's the marine propulsion diesel engines have been developed into lower speed and longer stroke for the energy saving(small S.F.O.C.). As these new trends the convetional mechnical-hydraulic governors were not adapted to the new requirements and the digital governors have been adopted in the marine use. The digital governors usually use the control algorithms such as the PID control, optimal control, adaptive control and etc. While the engine has delay time and parameter variations these control algorithms have difficulty in considering the stability and the robustness for the model uncertainty. In this study, the $H_{\infty}$ controller design method are applied to the speed control of the low speed marine diesel engine. By comparison the $H_{\infty}$ control results with the PID control results, the validity of the $H_{\infty}$ controller under the delay time and parameter variations is confirmed.

• Korean Journal of Mathematics
• /
• v.7 no.2
• /
• pp.159-166
• /
• 1999

For classical elliptic pseudodifferential operators $A({\lambda})$ of order $m$ > 0 with parameter ${\lambda}$ of weight ${\chi}$ > 0, it is known that $logDet_{\theta}A({\lambda})$ admits an asymptotic expansion as ${\theta}{\rightarrow}+{\infty}$. In this paper we show, with some assumptions, that the coefficients of ${\lambda}^-{\frac{n}{\chi}}$ can be expressed by the values of zeta functions at 0 for some elliptic ${\psi}$DO's on $M{\times}S^1{\times}{\cdots}{\times}S^1$ multiplied by $\frac{m}{c_{n-1}}$.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.452-455
• /
• 1997

It is well known that Variable Structure Controller(VSC) is robust to parameters variation and disturbance but its performance depends on the design parameters such as switching gain and slope of sliding surface. This paper proposes a more robust VSC that is composed of local VSC's. Each local VSC considers the local system dynamics which has narrow parameter variation and disturbance. We optimize the local VSC's by use of Evolution Strategy, and then we use Artificial Neural Network to generalize the local VSC's and construct the overall VSC in order to cover the whole range of parameter variation and disturbance. Simulation on BLDC motor current control has verified the proposed VSC is superior to the conventional VSC.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.151-155
• /
• 2000

We calculated a refractive index of the lens surface by measuring a spectral reflectance for a tinted time on manufacturing of the color lens. The longer a tinted time, the larger a reflectance and reflective index. The refractive index increased for a time up to the colorant's saturation state on the lens surface. The refractive index's change curve of blue color lens for a time depended on the Boltzmann growth curve. then we obtained the parameter's values of $n_{min}=1.482$, $n_{max}=1.497$, $t_c=11.53$ and $d_0=2.287$.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.58-60
• /
• 1999

This paper presents dynamic performance prediction using Matlab / simulink after parameter estimation of synchronous reluctance motor considering iron loss. Test motor is 3 phase SynRM with the segmental rotor, rating power is 0.175KW. Experiment equipment is consists of testing motor, dynamometer, vector invertor dynamocontroller, and power analyser. The stator iron loss and rotor iron loss are modelled by additional windings on three-phase winding axis. These windings are transformed into d-q axis, and are represented as equivalent eddy current windings. P-Q circle diagram method and single phase standstill method are used to measure motor parameters considering iron loss.

• Advances in materials Research
• /
• v.5 no.2
• /
• pp.81-92
• /
• 2016

Stress concentration is an interesting and essential field of study, as it is the prime cause of failure of structural parts under static load. In the current paper, stress and strain concentration factors in unidirectional functionally graded (UDFGM) plate with central circular cutout are predicted by carrying out a finite element study on ANSYS APDL platform. The present study aims to bridge the lacuna in the understandings of stress analysis in perforated functionally graded plates. It is found that the material variation parameter is an important criterion while designing a perforated UDFGM plate. By selecting a proper material variation parameter and direction of material gradation, the stress and strain concentrations can be significantly reduced.

• Electrical & Electronic Materials
• /
• v.9 no.1
• /
• pp.51-58
• /
• 1996

This report describes thick traveling-wave electrode formation and microwave transmission characteristics of the fabricated electrodes. Effective refractive indices of the microwave in the 5 micron CPW type traveling-wave electrodes is around 2.45 according to the results of time domain S parameter measurements. The bandwidth of the electrodes is about 10 GHz and could be extended to 15 GHz through optimization of the process. The developed process technique that enables plating of micropatterns upto 20 micron can be applied to broadband optical intensity modulators.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.171-173
• /
• 2003

This paper presents a new fault location algorithm for 3 phase underground cable based on distributed parameter circuit analysis, by which we establish the basic equations for each of core and sheath currents and voltages considering cross-bonding sheaths. The proposed algorithm need simulate by EMTP, and then the EMTP data need be compared with the calculation result in Matlab.

• Macromolecular Research
• /
• v.8 no.2
• /
• pp.66-72
• /
• 2000

Cis-Polybutadiene (cis-PBD) and the three polyethylenes (PE's) having different branch content were mixed to investigate crystallinity, thermodynamic interaction parameter(c), and diluents effect. Crys-tallinty of PE's decreased with increasing content of amorphous cis-PBD because of a decrease in both the degree of annealing and kinetics of diffusion of the crystallizable polymer content. The thermodynamic interaction parameter(c) for the three blend systems approximately equals to zero near the melting point. These systems were determined to be miscible on a molecular scale near or above the crystalline melting point of the crystalline PE's. From the measurement of T$\sub$m/ vs. T$\sub$c/ behavior, all the three blends showed a straight line for a plot of T$\sub$m/ vs. T$\sub$c/. This result means that the melting behavior of PE is mainly due to a diluent effect of cis-PBD component.