• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1881-1884
• /
• 2003

In some requirements of dc motor drive circuit applications are high quality output with generation of low internal conducted EMI. However the conventional dc motor drive circuits have been usually using unbalanced circuit which generates the high conducted EMI to the frame ground. This paper presents a balanced dc motor drive circuit which is effective way to reduce the common-mode noise. The circuit balancing is to make the noise pick up or occurring in both conductor lines, signal path and return path is equal in amplitude and opposite phase so that it will cancel out in the frame ground. The common-mode conducted noise reduction of this proposed dc motor drive is confirmed by experimental results.

• Journal of electromagnetic engineering and science
• /
• v.5 no.2
• /
• pp.72-79
• /
• 2005

The leaky dispersion characteristics of a circular dielectric rod were investigated using Davidenko's method for several lower-order transverse magnetic(TM) modes. The normalized complex propagation constants were precisely determined and their tolerances below $10^{-10}$ compared with zero for both real and imaginary parts. It was also checked whether the normalized complex propagation constants obtained represented forward leaky waves. The leaky modes existing below the cutoff frequency of the guided mode were classified as a nonphysical mode, reactive mode, antenna mode, and spectral gap based on a precise determination of the complex propagation constants. Finally, the effects of the dielectric constant and radius of the dielectric rod on the leaky dispersion characteristics were also considered.

• Journal of Astronomy and Space Sciences
• /
• v.20 no.4
• /
• pp.365-374
• /
• 2003

Satellite formation flying is currently an active area of research in the aerospace engineering. So it has been researched by various authors. In this study, a tracking controller using sliding mode techniques was designed to control a satellite for the satellite formation flying. In general, Hill's equations are used to describe the relative motion of the follower satellite with respect to the leader satellite. However the modified Hill's equations considering the $J_2$ perturbation were used for the design of sliding mode controller. The extended Kalman filter was applied to estimate the state vector based on the measurements of relative distance and velocity between two satellites. The simulation results show that the follower satellite tracks the desired trajectory well by thruster operations based on the sliding mode control law.

• Advances in concrete construction
• /
• v.14 no.5
• /
• pp.309-315
• /
• 2022

This paper depicts the diagram of cylindrical shells as an essential idea. It centers around an outline of exploration and use of cylindrical shell in expansive current circumstance. In view of investigation of the current and prospect of model as a piece of present exploration work, a straightforward contextual analysis is examined with Love's shell theory based on Galerkin's method. The cylindrical shells are attached from one end of the cylindrical shells. The frequencies of ring support shells are investigated against the half axial wave mode. The frequencies increase on increasing the half axial wave mode. Also, the frequencies are downsized with ring supports. The software MATLAB is preferred to others because in this software computing coding is very easy to do. Just single command 'eig' furnishes shell frequencies and mode shapes by calculating eigenvalues and eigenvectors respectively. The shell vibration frequencies for cylindrical shells are compared with those results found in the open literature.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.412-414
• /
• 2022

Global Navigation Satellite Systems (GNSSs)을 이용한 위치정보 서비스가 다양해짐에 따라, 전파 교란 및 기만에 대한 GNSSs의 취약성에 대한 우려도 점점 커지고 있다. 이에 미국, 러시아, 유럽 등 자체적으로 GNSS를 보유하고 운영하고 있는 국가조차도 GNSS의 취약성을 보완할 수 있는 부가적인 항법시스템을 개발하고 있다. 그 중 현재 운영 중인 Medium Frequency (MF) 주파수 대역의 신호를 이용하여 Differential GNSS (DGNSS) 정보를 전달하는 인프라를 활용하여 항법 신호를 송출하는 Ranging Mode (R-Mode) 시스템이 유럽과 한국을 중심으로 개발 중에 있다. 하지만 MF 주파수 대역의 신호는 일몰 이후에 전리층 일부가 소멸되면서 상위 전리층에서 신호가 반사되어 지표면에서 강한 세기로 수신되는 특성을 갖고 있다. 이런 특성은 지표를 통해 전파하는 원 신호를 수신하는 과정에 큰 오차요소로 작용할 수 있다. 본 논문에서는 현재 송출되고 있는 R-Mode 신호의 야간 특성을 분석하고자 한다. 현재 충주, 어청도 DGNSS 기준국에서 송출하고 있는 R-Mode 신호를 다양한 안테나 종류로 수신해보고, 항법 시스템의 정밀도 성능에 악영향을 줄 수 있는 특성에 대한 보완방법을 모색하였다.

• ETRI Journal
• /
• v.28 no.4
• /
• pp.425-434
• /
• 2006

We propose a fast macroblock mode prediction and decision algorithm based on contextual information for Pslices in the H.264/AVC video standard, in which the mode prediction part is composed of intra and inter modes. There are nine $4{\times}4$ and four $16{\times}16$ modes in the intra mode prediction, and seven block types exist for the best coding gain based on rate-distortion optimization. This scheme gives rise to exhaustive computations (search) in the coding procedure. To overcome this problem, a fast inter mode prediction scheme is applied that uses contextual mode information for P-slices. We verify the performance of the proposed scheme through a comparative analysis of experimental results. The suggested mode search procedure increased more than 57% in speed compared to a full mode search and more than 20% compared to the other methods.

• Journal of Welding and Joining
• /
• v.16 no.4
• /
• pp.39-46
• /
• 1998

$CO_2$ gas shielded arc welding has been characterized with its harsh arc compared to Ar-based shielding gases and with its high level of spattere specially in welding current range of 250~300 amperes. In this range of welding current, the metal transfer mode showed to be changed from short circuit to globular with the increase of welding voltage resulting in so-called the transitional mode in which both modes of transfer appeared together. To characterize the transitional mode, the short circuit events were divided into two groups, i.e. normal short circuit (N.S.C) which has short circuit time $(t_s)$ over 2msec and instantaneous short circuit (I.S.C) of $t_s$$\leq$2msec. The experimental results showed that the number of N.S.C decreased almost linearly with the increase of welding voltage and appeared to be not related with spatter generation rate. However I.S.C became to be pronounced in the transitional condition and its number reached the maximum value at around 29.0 volts. Considering the relation with the spatter generation rate, it was found that the number of I.S.C had a very strong correlation with the spatter generation rate of the transitional condition. It was further demonstrated that spatter generation rate decreased quite linearly with the decrease of I.S.C frequency. It implies that I.S.C is the most important waveform factor controlling the spatter generation of the transitional mode, i.e. in the middle range of welding current. Based on these results, It was discussed that in the transitional mode the basic concept of waveform control for suppressing spatter generation would be different from the one applied for typical short circuit transfer mode of low welding current.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.200-203
• /
• 2002

This paper presents Continuous-current mode of $S^4$-PFC(Single-Stage Single-switch Power Factor Correction) converter. Proposed converter operates in the continueous current mode(CCM) at full load and discontinuous current mode(DCM) at light load. So, characteristic of proposed converter is no bus voltage stress and Zero Voltage Switching(ZVS) using resonant auxiliary circuit. And. This paper presents characteristic of $S^4$-PFC converter and effect of circuit parameter of proposed converter through the input inductor, PFC capacitor's variation. All of these theory and characteristic verified through the experiment with a 72W(12V, 6A), $90^{kHz}$ prototype converter.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.473-473
• /
• 2000

This paper presents the 2-bit parallel algorithmic ADC using current mode for parallel method algorithm. It is operated by parallel conversion, 2-bit at each moment, and increase bit numbers by serial connection. The circuit operates in current mode. The comparison ratio can be controlled while working under mode operation. The circuit design used 0.8 ${\mu}{\textrm}{m}$ CMOS technology which capable to convert 2-bit in 50 ns, power consumed 0.786 nW, with input current 0-50 mA from 3V single supply. From simulation testing, the conversion rate is much faster than other method.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2001.06a
• /
• pp.305-314
• /
• 2001

본 논문해서는 m-커머스의 대표적인 성공 사례로 꼽히고 있는 NTT DoCOMo의 i-mode 서비스에 초점을 맞추어 성공요인과 그러한 성공을 이끌어 내는데 결정적인 역할을 담당한 웹 페이지 기술언어에 대해 살펴보았다. 분석 결과에 근거하면, i-mode 서비스의 대대적인 성공은 끊임없이 Positive Feedback의 계기를 만들어 냄으로써 가능하게 되었는데, 그것은 다름 아닌 C-HTML이라는 웹페이지 기술언어의 채용이 많은 역할을 하고 있다.