• Applied Microscopy
• /
• v.36 no.1
• /
• pp.35-45
• /
• 2006

Plants of Vitex negundo are known to develop numerous trichomes throughout their body, where certain trichome types have been believed to be one of the plausible structures for the unique scents. In the current study. structural aspects of the trichomes have been examined in leaves and stems of Vitex negundo using TEM and SEM. Trichome types as well as structural changes that occurred in certain trichomes during secretion have been mainly focused. Three type of glandular trichomes and two types of non-glandular trichomes were developed in the epidermis of young and mature Vitex negundo plants. The glandular trichomes included the peltate type (Type 1), the capitate type (Type 2), and degraded capitate type (Type 3), whereas the non-glandular warty trichomes contained the multicellular (Types 4) and unicellular type (Type 5). Type 1 and 2 consisted of head and stalk cells, but their number and size were different. One secretory cavity was formed from the four head cells in the former, but only two head cells were involved in the latter. The cytoplasmic density in the head cell was quite high and in particular, sER and Golgi bodies were well developed. At initiation of their development, the cuticle layer of the head cells separated from the outer tangential wall to form a secretory cavity. Subsequently the cavity expanded acropetally and a large number of secretory vesicles continuously produced from the head cells until they filled the entire cavity. The cavity contained materials that would be soon discharged into intercellular spaces and/or into the air. The cavity began to decrease the volume by contracting at initial secretion but degrade rapidly within short time. It has been suggested that the mode of secretion in V. negundo is probably the eccrine secretion, since no break or rupture of the cavity has been observed during examination. Contrastingly Type 3 exhibited deterioration of the head cell at early stage. Type 4 was about $110{\sim}190{\mu}m$ long, consisting of $2{\sim}3$ cells, and distributed more in the adaxial epidermis compared to the abaxial surface. However, $20{\sim}30{\mu}m$ long Type 5 was extremely dense in both epidermis. Among several trichome types, Type 1 and 2 probably play an important role in discharging unique aromatic scents in plants of V. negundo.

• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.274-281
• /
• 1999

Usually sputtering and electroless plating methods were used for manufacturing metal-alloy thin film magnetic memory devices. Since electroless plating method has many merits in mass production and product variety com­pared to sputtering method, many researches about electroless plating have been performed in the United State of America and Japan. However, electroless plating method has not been studied frequently in Korea. In these respects the purpose of this research is manufacturing Co-Mn-P alloy thin film on the corning glass 2948 by electroless plating method using sodium hypophosphite as a reductant, and analyzing deposition rate, alloy composition, microstructure, and magnetic characteristics at various pH's and temperatures. For Co-P alloy thin film, the reductive deposition reaction 0$\alpha$urred only in basic condition, not in acidic condition. The deposition rate increased as the pH and temperature increased, and the optimum condition was found at the pH of 10 and the temperature of $80^{\circ}C$. Also magnetic charac­teristics was found to be most excellent at the pH of 9 and the temperature of $70^{\circ}C$, resulting in the coercive force of 8700e and the squareness of 0.78. At this condition, the contents of P was 2.54% and the thickness of the film was $0.216\mu\textrm{m}$. For crystal orientation, we could not observe fcc for $\beta$-Co. On the other hand,(1010), (0002), (1011) orientation of hcp for a-Co was observed. We could confirm the formation of longitudinal magnetization from dominant (1010) and (1011) orientation of Co-P alloy. For Co-Mn-P alloy deposition, coercive force was about 1000e more than that of Co P alloy, but squareness had no difference. For crystal orientation, (l01O) and (lOll) orientation of $\alpha$-Co was dominant as same as that of Co- P alloy. Likewise we could confirm the formation of longitudinal magnetization.

• Research in Plant Disease
• /
• v.12 no.2
• /
• pp.91-98
• /
• 2006

A filtrate powder, designated as KNF2022, produced from culture broth of Acinetobacter sp. KTB3 was tested for their inhibitory effects on Pepper mild mottle virus (PMMoV) infection to Nicotiana glutinosa or N. tabacum cv. Xanthi nc. When 1/100 dilution with distilled water was treated to the plants and PMMoV was inoculated, the inhibition was estimated to be 94.3 and 95.6%, respectively. The same concentrations of KNF2022 inhibited infections of Pepper mottle virus (PepMoV) and Cucumber mosaic virus (CMV) on Chenopodium amaranticolor by 97.1 and 92.5%, respectively. Duration of inhibitory activity of the filtrate powder from Acinetobacter sp. culture broth against PMMoV infection on N. glutinosa was maintained for 2 days at 80% inhibition level, however, the inhibitory effect was diminished from 4 days after treatment to 50% levels. To evaluate inhibitory effects on systemic host plants of the antiviral agent, symptom developments of PMMoV, PepMoV and CMV on KNF2022-treated pepper plants were investigated. Delayed symptom developments until 10 days after inoculation (DAI) were observed for all the three viruses when the viruses were inoculated individually, and these delayed symptom development effects were maintained until 30 DAI in case of PepMoV. Moreover, PepMoV was not detected by RT-PCR and ELISA until 30 DAI. These delayed symptom development effects were diminished in all combinations of three virus co-inoculations due to synergism of three viruses on symptom developments. Inhibitory effect of KNF2022 was verified under electron microscopic examinations using purified virus preparations. Particles of PMMoV and PepMoV were observed on specimens from 5 min after KNF2022 treatment, and the particle sizes were reached in the range of 200-250 nm and 400-600 nm, respectively. Furthermore, the viral particles were destructed and particle sizes were reached in the range of 100-150 nm and 300-500 nm, respectively, on 60 min after treatments. Reduction of local lesion numbers on N. tabacum cv. Xanthi nc and C. amaranticolor were accompanied with reduction of virus particle sizes. In the case of CMV destructed particle numbers were also increased according to incubation period after KNF2022 treatment and local lesions on C. amaranticolor were reduced.

• Restorative Dentistry and Endodontics
• /
• v.30 no.6
• /
• pp.450-460
• /
• 2005

The aim of this study was to evaluate the effect of cavity shape, bond quality of bonding agent and volume of resin composite on shrinkage stress developed at the cavity floor. This was done by measuring the shear bond strength with respect to iris materials (cavity shape , adhesive-coated dentin as a high C-factor and Teflon-coated metal as a low C-factor), bonding agents (bond quality: $Scotchbond^{TM}$ Multi-purpose and Xeno III) and iris hole diameters (volume; 1mm or 3mm in $diameter{\times}1.5mm$ in thickness). Ninety-six molars were randomly divided into 8 groups ($2{\times}2{\times}2$ experimental setup). In order to simulate a Class I cavity, shear bond strength was measured on the flat occlusal dentin surface with irises. The iris hole was filled with Z250 restorative resin composite in a bulk-filling manner. The data was analyzed using three-way ANOVA and the Tukey test. Fracture mode analysis was also done When the cavity had high C-factor, good bond quality and large volume, the bond strength decreased significantly The volume of resin composite restricted within the well-bonded cavity walls is also be suggested to be included in the concept of C-factor, as well as the cavity shape and bond quality. Since the bond quality and volume can exaggerate the effect of cavity shape on the shrinkage stress developed at the resin-dentin bond, resin composites must be filled in a method, which minimizes the volume that can increase the C-factor.

• Women's Health Nursing
• /
• v.4 no.1
• /
• pp.161-178
• /
• 1998

In spite of the great progress of the theory and skill of the Nursing Care & Medical area in relation to pregnancy, nurses in clinics face up to many challenges in maternity nursing care areas. The reason is that the mobility and mortality of mothers was sharply decreased and the unknown high-risk diseases of pregnancy woman in the past is made public. That's why it is difficult to meet the pregnancy woman in natural process from pregnancy to delivery in recently. Admission rooms are filled with high-risk pregnancy women. As a matter of fact, we have done nursing care into the surface symptoms and diseases of high-risk pregnancy women so far. We have been indifferent to a long period hospitalization, separation from family, and conflict of repeated examination. Therefore, it is widely spread to understand the emotional conflict experienced by high-risk pregnancy women and to need for nursing intervention to bring up about emotional support and the ability of perception in psychological crisis. Although the pregnancy woman judged in high-risk should carry out normal task of pregnancy, she have to be confronted with secondary risk situation. The health of self & fetus threatened by the risk situation could be decreased through care plan, but psychological stress increases. Therefore, the pregnancy brings into non-control state. It is important to ask that what the hospitalized pregnancy women in high-risk think of themselves status. Because misunderstanding or serious anxiety of themselves status put into mother and fetus in danger. And adaptation mode makes all the difference. I would like to consider how nurses could deal with this high-risk circumstances in the position of pregnancy woman on the basis of the above fact. This study uses phenomenological method to suggest the basis material for nurses to do nursing intervention in view of pregnancy woman. Because this method understands the nature of true life of pregnancy woman throughly. The phenomenological method is the sources to describe or explain affluently the process generated in confirmation areas and environment and is the application for readers to understand and recognize clinic reality and then apply this method to reasoning study place or other places. Specifically, the phenomenon study method, one of the phenomenological method, is applied. The use of that method is to describe and generalize the experience in environment exactly. The study of this study is as follows : Among 187 descriptive stamens from 8 study participants are classified into 42 theme cluster at the stage of the first analysis. Those theme is categorized into 8 sub-subjects such as anxiety of uncertainty, foreknowledge about risk circumstance, will power about overcome, unsettled feeling about hospital, relief, optimistic thought, family support, and indifferences. At the last stage of analysis, those things are categorized into 3 subjects. When high-risk pregnancy woman foretell the situation, they feel unsettlement about uncertainty and untrust feeling about hospital. But they are ease with family support and hospital support. On the other hand, they express indifferent 3-way structure response to the situation having will of overcome and exceeding optimistic thought. In those statements, the experience by pregnancy woman shows 3 respect subjects. 1. They are anxious of this situation and are in desperation and don't recognize their role to be carried out 2. They think of this situation as normal process of pregnancy and are not concerned that this can give themselves and fetus fatal damage. 3. The pregnancy women will never confront this situation. This study shows the pregnancy woman has anxiety and optimistic relief about the situation, and ignores and optimistic relief about the situation, and ignores many things. Therefore, nurses in clinic should give pregnancy woman knowledge and information about the high-risk and help them to deal with the situation spontaneously. High-risk pregnancy woman should have the care plan in respect of the right perception. And the nurse know that their support help out pregnancy woman overcome the crisis in this respect of the special nursing intervention.

• Journal of Radiation Industry
• /
• v.9 no.2
• /
• pp.85-90
• /
• 2015

Purpose: Time of operation has been reduced and accuracy of operation has been improved since C-arm, which offer real-time image of patient, was introduced in operation room. However, because of the contamination of patient, C-arm could not be used more appropriately. Therefore, this study is to know factors of controlling exposure dose, image quality and the exposed dose of health professional in operation room. Materials and methods: Height of Wilson frame (bed for operation) was fixed at 130 cm. Then, Model 76-2 Phantom, which was set by assembling manual of Fluke Company, was set on the bed. Head/Spine Fluoroscopy AEC mode was set for exposure condition. According to detector size of C-arm, the absorbed dose per min was measured in the 7 steps OFD (cm) from 10 cm to 40 cm (10, 15, 20, 25, 30, 35, 40 cm). In each step of OFD, the absorbed dose per min of same diameter of collimation was measured. Moreover, using Nero MAX Model 8000, exposure dose per min was measured according to 3 step of distance from detector (20 cm, 60 cm, 100 cm). Finally, resolution was measured by CDRH Disc Phantom and magnification of each OFD was measured by aluminum stick bar. Result: According to detector size of C-arm, difference of absorbed dose shows that the dose of 20 cm OFD is 1.750 times higher than the dose of 40 cm OFD. It means that the C-arm, which has smaller size of detector, shows the bigger difference of absorbed dose per min (p<0.05). In the difference of absorbed dose in the same step of OFD (from 20 cm to 40 cm), the absorbed dose of 9 inch detect or C-arm was 1.370 times higher than 12 inch' s (p<0.05). When OFD was set to 20 cm OFD, the absorbed dose of non-collimation case was approximately 0.816 times lower than the absorbed dose of collimation cases (p<0.05). When the distance was 20 cm from detector, exposed does includes first-ray and scatter-ray. When the distance was 60 cm and 100 cm from detector, exposed does includes just scatter-ray. So, there was the 2.200 times difference of absorbed does. Finally, when OFD was increased, spatial resolution was 4 to 5 step was increased. However, low contrast resolution was not relative. Moreover, there was 1.363 times difference of magnification (p<0.05). Conclusion: When C-Arm is used, avoiding contamination of patient is more important factor than reducing exposed dose of health professional in operation room. Just controlling exposure time is just way to reduce the exposed does of workers. However, in the case, non-probability influence could be occurred. Therefore, this study proved that the exposed dose will be reduced if the factors such as using small detector size of C-arm, setting OFD from 20 cm to 25 cm and non-collimating. Moreover, dose management of C-arm in the non-interesting area will be considered additionally.

• Journal of Legislation Research
• /
• no.53
• /
• pp.593-631
• /
• 2017

Like the technological competition of each country around commercialization of Autonomous Vehicles(the rest is 'AV'), legalizations are also in a competition. However, in the midst of this competition, the Ethik-Kommission Automatisiertes und vernetztes Fahren of Germany has recently introduced 20 guidelines. This guideline is expected to serve as a milestone for future AV legislations. In this paper, I have formulated a new legislative proposal that will incorporate the main content presented by the Ethik-Kommission. The structure is largely divided into general rules of purpose and definition, chapter on types of AV and safety standards, registration and inspection, maintenance, licenses for AV, driver's obligations, insurance and accident responsibilities, roads and facilities, traffic system, and chapter on penalties. The commercialization of AV in Korea seems to be in a distant future, and it is possible to pretend that it is not necessary to prepare legal systems. But considering our reality, leading legislation may be necessary. In this paper, I have prepared individual legislative proposals based on the essential matters based on the criminal responsibility in case of AV car accidents. To assure the safety of AV, AV and mode of operation were defined for more clear interpretation and application of law, and basic safety standards for AV were presented. In addition, the obligation of insurance and the liability for damages were defined, and the possibility of immunity from the criminal responsibility was examined. Furthermore, I have examined the penalties for penalties such as hacking in order to secure the effectiveness of the Act. Based on these discussions, I have attempted the 'Autonomous Vehicles Act', which aims to provide a basis for new discussions to be held on the basis of various academic fields related to the operation of AV and related industries in the future. Although there may be a sense of unurgency in time, the automobile industry needs time to prepare for the regulation of the AV ahead of time. And a process of public debate is also needed for the ecosystem of healthy AV industry.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.6
• /
• pp.239-250
• /
• 2020

The purpose of this paper is to explore the influence of the "contextualization" effect of web celebrity live broadcast on the e-commerce platform on consumers' perception of product value, risk and purchase intention. Live in this paper, using Taobao shopping consumers as the research object, the survey method, questionnaire survey is adopted, the form through the questionnaire and distributed network, a live in order to further validation of web celebrity effect of contextualized actual influence on consumer purchase intention, questionnaire design the Likert scale, seven and recycling questionnaire analysis using the statistical software SPSS 23.0 and AMOS 22.0 after processing the data. After determining the reliability and validity of the questionnaire, the exploratory factor analysis was used to verify the hypothesis and calculate the actual adjustment degree of the "contextualization" effect of web celebrity live broadcasting on consumers' purchase intention. The research results of this paper are summarized as follows :(1) consumers' perceived value of products can significantly positively affect their purchase intention, while perceived risk has a significantly negative impact on their purchase intention; (2) consumers' trust and purchase intention to products are regulated by the "contextualization" of web celebrity live broadcast. Specifically, for web celebrity live broadcasting with good "contextualization" effect, the perceived value of consumer products has a positive impact on product trust, which is higher than that of web celebrity live broadcasting with poor "contextualization" effect. In terms of resolving consumers' perceived risks to products, web celebrity live broadcast with good "contextualization" effect is also significantly better than web celebrity live broadcast with poor "contextualization" effect. Based on empirical analysis, this paper concludes that web celebrity live broadcasting will become a new breakthrough for the sustainable growth of the e-commerce industry, and puts forward Suggestions on the e-commerce marketing mode and the transformation of web celebrity live broadcasting industry.

• The Journal of KAIRB
• /
• v.3 no.2
• /
• pp.19-27
• /
• 2021

Purpose: This study aimed to analyze the knowledge levels, attitudes, and factors affecting the choices on the education of the participants who completed their education of persons conducting clinical trial workers, and to assess the problems of the current education system for clinical trial workers, leading to improvements. Methods: Clinical trial workers (including principal investigators/subinvestigators, members of the Institutional Review Board [IRB], clinical research coordinators) who were affiliated to one of the 4 university hospitals running their own clinical trial center and IRB in Daegu and completed their education of persons conducting clinical trial workers were the subjects of this study. One hundred seven online questionnaires were answered from 2021-04-02 to 2021-04-17. Descriptive statistics and Pearson correlation analysis were used to analyze the acquired data. Independent t-test and 1-way analysis of variance were used to analyze the differences in the knowledge levels and attitudes following the characteristics of the education participants. Results: The baseline characteristics of the 107 participants were as follows: the majority of the participants were female (72.0%), were in their 30s (36.4%), had a nursing major (29.0%), were clinical research coordinators (63.6%), had never experienced a principal investigator (79.4%), had participated 3 or more educations (58.9%), had completed their maintenance course (55.1%), had 5 or more years of clinical trial experiences (34.6%). The fields on which participants had low levels of objective knowledge were "types and preparations on audits of clinical trials," "regulations on clinical trials (Pharmaceutical Affairs Act, Korea Good Clinical Practice)." The difficulties that the participants faced were on "annual educations" and "lack of information regarding the educations." Factors that showed significant differences in objective knowledge were sex (p=0.02), number of educations (p=0.004), the curriculum of 2020 (p=0.001). Age (p=0.004), having experienced a principal investigator (p=0.006), number of educations (p<0.001), the curriculum of 2020 (p<0.001), clinical trial career (p=0.001) were factors that significantly affected subjective knowledge. Attitudes toward the education were positively correlated with objective knowledge (r=0.20, p=0.04) and subjective knowledge (r=0.32, p=0.001). Major sources through which information on educations was acquired were "institutional notices," and major factors affecting the choices on the education were "when the education took place" and "where the education took place." "Within the affiliated institution," "Online classes (recorded)" and "IRB and review processes" were each the most preferred place, mode, and content of the education. Conclusion: Knowledge levels varied largely among participants who completed their education of persons conducting clinical trial workers, depending on their characteristics such as the number of educations. Participants also complained about their lack of information on educations. The quality of education may be improved if clinical trial organizations are designated as education facilities. Education programs must be developed considering the knowledge level and demand of the participants. Furthermore, as offline classes may be impossible due to pandemics such as the coronavirus disease 2019, the development of diverse and sophisticated online classes is looked forward to.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.1
• /
• pp.20-26
• /
• 2019

Purpose: Recently TF-adaptive movement is developed in order to increase the durability of TF files. The purpose of this study was to assess the effects of adaptive movement on durability and performance of twisted files. Materials and Methods: Resin blocks simulating artificial J-shape canals were used for this study. In TFC group, TF-adaptive ML-1 (25/.08 size) files were used to prepare the canals under continuous rotation 500 rpm/4.0 Ncm. In TFA group, TF-adaptive ML-1 (25/.08 size) files were used to prepare the canals under adaptive movement. After preparing each artificial canal, TF files were observed under dental microscope for assessing existence of unwinding, distortion, and fracture. If unwinding of flute was observed, the number of artificial canals until unwinding of flute occurs was recorded. Required time until instruments reach working length and distance of unwinded portion of files from D0 were measured. All test results were conducted by Mann-Whitney U test at a 0.05 level of significance. Results: No Ni-Ti instrument's separation was observed. Number of resin blocks until file unwinding happens and working time was significantly high in TFA group compared to TF group. Distance of distortion from D0 didn't show significant difference between TFA, TF groups. Conclusion: The number of resin blocks prepared until unwinding happens and working time were significantly high in TFA group. The location of unwinding showed no significant difference between 2 groups. Adaptive movement increased the number of canals prepared until unwinding occurs and working time of twisted files.