• Journal of electromagnetic engineering and science
• /
• v.16 no.1
• /
• pp.57-65
• /
• 2016

In this paper, based on the mode analysis of four-conductor lines, the extended mixed-mode chain-parameters and S-parameters of four-conductor lines are estimated using current division factors. The extended mixed-mode chain-parameters of cascaded four-conductor lines are then obtained with mode conversion. And, the extended mixed-mode S-parameters of cascaded four-conductor lines can be predicted from the transformation of the extended chain-parameters. Compared to the extended mixed-mode S-parameters of four-conductor lines, the cross-mode S-parameters are induced in the extended mixed-mode S-parameters of cascaded four-conductor lines, due to the imbalanced current division factors of cascaded two sections. The generated cross-mode S-parameters make the equivalent different- and common-mode conductors not independent from each other again. In addition, a new mode conversion, which applies the imbalanced current division factors, between the extended mixed-mode S-parameters and standard S-parameters is also proposed in this paper. Finally, the validity of the proposed extended mixed-mode S-parameters and mode conversion is confirmed by a comparison of the simulated and estimated results of shielded cable.

• Journal of Navigation and Port Research
• /
• v.40 no.3
• /
• pp.89-95
• /
• 2016

S-Mode is a concept involving a standardized navigation display with accompanying standardized functionality and interfaces for navigational equipment. It was proposed by the International Federation of Shipmasters' Associations at IMO NAV $54^{th}$ session in 2008. The IMO e-Navigation Strategy Implementation Plan(SIP) addresses, S-Mode and the IMO MSC at its $95^{th}$ session in 2015 approved an output 1 to develop S-Mode guidance. In this study, it has been carried out survey of user needs for adopting S-Mode guideline on ECDIS which is core navigational equipment. It is conducted with a questionnaire survey, targeting deck officers and masters who will be the primary users of the equipment related to the e-Navigation system. In this research, users' opinion survey regarding the necessity of development, the scope of standardization, and priorities was conducted. This survey result could be contributed to development S-Mode guideline and specify the concept of S-Mode. It would be derived from standardizing component through providing elements to be considered for its development.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.4
• /
• pp.450-467
• /
• 1998

The characteristics of the unstable impinging circular jet is investigated based on the frequency characteristics and the sound field of the impinging-tones. Two symmetric modes S1 and S2, associated with low frequency and high frequency respectively, and one helical mode H have been observed. At low speed the S2 mode is dominant and switched by the S1 mode as the speed increases. When the jet speed is high the S1 mode is very active over the impinging distance from half the nozzle diameter to its ten times, while the S2 mode occurs at shorter distance corresponding to stage 2 and 3. The helical mode H seems unstable, likely to be influenced much by the experimental environment, and occurs at relatively high speed with almost the same frequency characteristics as the S2 mode. By estimating the convection speed of the unstable jet, it is found that the ratio of the convection speed to the jet speed decreases with both Strouhal number and Reynolds number and the speed of S2 mode is faster than the Si mode. When the present experimental results are compared with the previous investigations performed for the hole tone and the impinging tone with a small plate, the S1 mode is found to be associated with the ring vortex of large diameter with low speed, but the S2 mode with the vortex of small diameter with high speed. In addition, the frequency is found to be influenced by the nozzle configuration but the characteristics is almost the same. From the impinging distance and frequency range, it can be deduced that S1 mode is related with the jet column mode and S2 mode with the shear mode.

• Journal of the Korean Home Economics Association
• /
• v.35 no.5
• /
• pp.163-175
• /
• 1997

This study investigated the relationship between mother's verbal control modes and children's social competency, the relationship between mother's verbal control modes and children's internal-external control, and the relationship between children's internal-external control and children's social competency. The subjects of this study were 157 boys and 144 girls attending elementary schools and their mothers in Busan. Lee's(1993) questionnaire on mother's verbal control modes, the modified version of Nowicki and Strickland's CN-SIE on internal-external control and Choi's(1992) questionnaire on social competence were used. The results were as follows: 1) The mothers control their children mostly by position-oriented mode. And mother's imperative mode for boys differed significantly from that for girls. Boys perceived mother's verbal control mode as more imperative. 2) There were significant negative correlations between mother's imperative mode and boy's social competency, between mother's imperative mode and boy's anxiety, and between mother's imperative mode and boy's internal-external control and boy's social competency, and between boy's internal-external control and boy's leadership. There were significant correlations between mother's position-oriented mode and girl's leadership, between mother's position-oriented mode and girl's, affection on parents, between mother's position-oriented mode and girl's internal-external control. There were significant negative correlations between girl's internal-external control and girl's anxiety. 3) Children's internal-external control was the predictor variable influencing on children' social competency, children's leadership. Children's sex was the predictor variable influencing on children' anxiety. And the mother's imperative mode and the mother's position-oriented mode were the predictor variables influencing on children' affection on parents.

• Journal of the Korean Home Economics Association
• /
• v.37 no.4
• /
• pp.85-95
• /
• 1999

This study was to investigate the following research questions. (1) Is there any gender difference in the mother's verbal control and the child's peer relation\ulcorner (2) Is there any relationship between the mother's verbal control and the child's peer relation\ulcorner (3) Is the child's peer-relation influenced by the mother's verbal control\ulcorner The subjects of this study were 157 boys and 144 girls attending elementary schools in Susan. Lee, Kyung-Hee's questionnaires(1993) on mother's verbal control modes and Lee, Ju-Lie's questionnaires(1994) on child's peer relation were used. The results were as follows: 1) The mother's imperative mode for boys differed significantly from that for girls. Boys perceived mother's verbal control mode as more imperative. 2) There were significantly correlations between mother's position- oriented mode and boy's peer relation, between mother's person-oriented mode and boy's peer relation, and between mother's position-oriented mode and girl's peer relation. 3) The mother's position-oriented mode and the mother's person-oriented mode were the predictor variables influencing on child's peer relation.

• Journal of the Korean Home Economics Association
• /
• v.32 no.5
• /
• pp.109-124
• /
• 1994

The present study was conducted to elucidate the relationship between parent's verbal control modes and children's social competency. Two questionanires were developed by the authors for this study. The questionnaire for measuring parent's verbal control modes was composed of 84 and 87 items for mother and father, respectively, which assesses three types of verbal control modes; imperative control position-oriented control and person-oriented control. The questionnaire for measuring children's social competency perceived by mothers was composed of 27 items, which assesses four areas of social competency; initiative sociability responsibility and self-disclosure. the subjects of this study were 436 mothers and their children of fifth and sixth grade in elementary schools located in Seoul. The results of this study were as follows: 1) Parents control their children mostly by position-oriented mode and least by imperative mode. 2) There were significant correlations between father's verbal control mode and children's social competency. children's social competency was related positively to the person-oriented and position-oriented modes but negatively to the imperative mode. The best variables explaining boy's social competency were father's imperative and position-oriented modes whereas that for girl's was position oriented mode. 3) Mother's verbal control mode was not significant in explaining children's social competency. 4) The negative impact of father's imperative mode in combination with the mother's person-oriented mode on the children's social competency was greater than other combinations of father's and mother's verbal control modes.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.461-465
• /
• 1996

Position and rate control modes arc the two common modes for controlling remote manipulators with joysticks or hand controllers. Generally, position mode is easier for teleoperation than rate modes, when the manipulation work space is small or comparable to the human operator's control space. When the telemanipulator's work space is very large, human operator's control motion range must be large to allow telemanipulator's full range of motion resulting poor control resolution. One way to solve the poor resolution problem is to use indexing. However, rate mode can provide any higher degree of resolution without use of indexing. If two modes are mixed, master controller will be more convenient. The mixed mode algorithm, changes operating mode from position mode to rate mode or vise versa using fuzzy logic. The fuzzy logic algorithm, which has been designed to recognize the teleoperator's intended motion properly, provides an intelligence to a master controller.

• Atmosphere
• /
• v.32 no.4
• /
• pp.323-340
• /
• 2022

We analyzed the high-resolution wind data of Aircraft-Based Observation from the Mode-Selective Enhanced Surveillance (Mode-S EHS) data in Korea. For assessment of its quality, the Mode-S wind data was compared with the ECMWF ReAnalysis 5 (ERA5) reanalysis and Aircraft Meteorological Data Relay (AMDAR) data for more than 3-months from 7 May 2021 to 24 August 2021 near Incheon International Airport, Korea. Considering that the AMDAR reports are not provided by all commercial aircraft, total number of the Mode-S derived wind data with a second sampling rate was about twice larger than that of available AMDAR wind data. After the quality control procedures by removing erroneous samples, it was found that the root mean square errors (RMSEs) of the Mode-S retrieved winds are similar to that from the AMDAR winds. In particular, between 550 and 650 hPa levels, RMSE of the Mode-S (AMDAR) zonal wind against ERA5 data was about 2.3 m s^-1 (1.9 m s^-1), and those increased to 3.3 m s^-1 (2.4 m s^-1) in 200~500 hPa levels. A similar trend was found in the meridional wind, but a distinct positive mean bias of 2.16 m s^-1 was observed between 875 and 1,000 hPa levels. Winds retrieved from the Mode-S also showed a good agreement directly with AMDAR data. As the Mode-S provides a large amount of data with a reliable quality, it can be useful for both data assimilation in the numerical weather prediction model and situational awareness of wind and turbulence for aviation safety in Korea.

• Progress in Superconductivity
• /
• v.1 no.1
• /
• pp.36-41
• /
• 1999

Methods for mode identification and accurate measurements of the unloaded Q ($Q_0$) of a dielectric-loaded $TE_{01{\delta}}$ mode cavity resonator with HTS endplates are proposed. A resonator with a sapphire rod and $YBa_2Cu_3O_{7-x}$(YBCO) endplates was prepared and its microwave properties were studied at temperatures above 30 K. The $TE_{01{\delta}}$ mode $Q_0$ of the resonator, designed to work as a tunable resonator with variations in the gap distance (s) between the sapphire rod and the top YBCO, was more than 1000000 at s = 0 mm and at 30 K with the resonant frequency of 19.56 GHz. The $TE_{01{\delta}}$ mode $Q_0$ decreases as s increases for s < 2 mm until mode couplings between the $TE_{01{\delta}}$ mode and other modes appeared at s = 2 mm. Significant dependence of the $TE_{01{\delta}}$ mode $Q_0$ on the input and output coupling constants was also observed. Applications of the open-ended $TE_{01{\delta}}$ mode cavity resonator for a tunable resonator with a very high Q as well as a characterization tool for the surface resistance measurements of HTS films are described.

• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.1-18
• /
• 2007

Non-linear elastic wavefield inversion is a powerful method for estimating elastic parameters for physical constraints that determine subsurface rock and properties. Here, I introduce six elastic-wave velocity models by reconstructing elastic-wave velocity variations from real data and a 2D elastic-wave velocity model. Reflection seismic data information is often decoupled into short and long wavelength components. The local search method has difficulty in estimating the longer wavelength velocity if the starting model is far from the true model, and source frequencies are then changed from lower to higher bands (as in the 'frequency-cascade scheme') to estimate model elastic parameters. Elastic parameters are inverted at each inversion step ('simultaneous mode') with a starting model of linear P- and S-wave velocity trends with depth. Elastic parameters are also derived by inversion in three other modes - using a P- and S-wave velocity basis $('V_P\;V_S\;mode')$; P-impedance and Poisson's ratio basis $('I_P\;Poisson\;mode')$; and P- and S-impedance $('I_P\;I_S\;mode')$. Density values are updated at each elastic inversion step under three assumptions in each mode. By evaluating the accuracy of the inversion for each parameter set for elastic models, it can be concluded that there is no specific difference between the inversion results for the $V_P\;V_S$ mode and the $I_P$ Poisson mode. The same conclusion is expected for the $I_P\;I_S$ mode, too. This gives us a sound basis for full wavelength elastic wavefield inversion.