• Journal of Preventive Medicine and Public Health
• /
• v.16 no.1
• /
• pp.67-77
• /
• 1983

To investigate the an air pollution by particulate matter and its dispersion, a cement plant produceing portland cement 600,000 ton/year and its vicinity were surveyed from Obtober, 1980 to April, 1983. The survey was mainly focused on main stack emmission rate of the cement plant and particle size distribution in the dust, dustfall and total suspended particulate concentration in the area by month and distance from the stack. The results of the study were as follows; 1. The main stack emission rate was surveyed before and after the spray tower was additionally installed to the original E.P bag filter. Before the spray tower installed, the main stack emission rate was higher ($0.64g/Nm^3$) than the emission standard of Korean Environmental Preservation Law's ($0.59g/Nm^3$, amended to $0.4g/Nm^3$ on April 1983), but after the spray tower was installed, its main stack emission rate was markedly decreased to the standard ($0.43g/Nm^3$). 2. $2{\sim}3{\mu}m$ of the particle size was the largest portion (20.8%) of the dust particulate from the main stack and 50% of the frequency distribution was $1.5{\mu}m$ of the size. Most particle size was below $10{\mu}m$. 3. The spray tower reduced the dustfall to $37.81{\sim}9.76\;ton/km^2/month$ while dustfall appeared at $45.29-15.45ton/km^2/month$, in the vicinity of plant before spray tower installed 4. Mean concentrations of total suspended particulate for 24 hours of the various stations were determined in $20.6-200.0{\mu}g/m^3$, 3 stations of tham were higher than the value of Harry and William's arthmetic average standard $130{\mu}g/m^3$. 5. Linear regression between dustfall [X] and total suspended particulate[Y] concentration was an equation, Y=4.024X+11.479.[r=0.91] 6. During the whole seasons in the opposite area 100m apart from the omission source the prevailing wind direction was with estimated more than $30ton/km^2/month$, and the concentration of total suspended particulate for 24 hours averaging time was more than $140{\mu}g/m^3$ in the same area and direction. 7. Assuming the wind direction were constant through the day dustfalls for a day were estimated at $13.40ton/km^2/day,\;10.79ton/km^2/day$ and $4.55ton/km^2/day$ at various distances of 100m, 500m and 1,500m from the emission source respectively. 8. In the simutalion of dustfall and suspended dust by area, Gaussian dispersion model modified by size distribution of particulate matter was not applicated since the emission of dust were from multi sources other them stack. From the above results, it could be applied that the dispersion of dust from the cement plant is estimated and regulated for the purpose of environmental protection.

• Korean Journal of Clinical Laboratory Science
• /
• v.56 no.1
• /
• pp.32-42
• /
• 2024

This study compared the results of hemolyzed samples and re-collected samples to investigate a hemolysis influence and an acceptable hemolysis index (HI). Before and after hemolysis, alkaline phosphatase (ALP), aspartate aminotransferase (AST), alanine aminotransferase (ALT), amylase (Amy), direct bilirubin (D-bil), total bilirubin (T-bil), creatine phosphokinase (CK), gamma glutamyl transferase (GGT), iron, potassium (K), lactate dehydrogenase (LDH), magnesium (Mg), phosphorus (Phos), total protein (TP), and uric acid (UA) showed significant results in the paired t-test. LDH, K, iron, AST, CK, GGT, TP, Amy and Phos had a high correlation between the degree of hemolysis and the results of samples. When comparing Roche's cut-off HI with HI^QChigh obtained using quality control (QC) high standard deviation (SD), AST, D-bil, CK, and LDH were similar, but Amy, GGT, K, iron, Phos, and TP were lower than the cut-off HI of Roche, while ALP and ALT were higher. Some analytes which showed no significant results in the paired t-test, were found to have significant results in HI>200. Hence, it is suggested that the hemolyzed sample should be rejected if HI>200. Based on this study that some analytes were affected when HI<100, we recommend to set the standard of hemolysis starting from HI>50.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.175-184
• /
• 1997

The objective of this paper is to study arelationship between maximum response and its standard deviation of rotational shells that are subjected to uneven settlements. For this, the ratio, .eta, of the maximum response to standard deviation and it's approximate, .eta./sub apr/, are investigated by stochastic methods. Also, an equation for .eta./sub apr/, that is a function of predominant harmonic number is suggested. The settlements are represented by the Fourier series. Each term in the series contains two coefficients; the amplitude and the phase angle. It is assumed that phase angles are random variables and amplitudes are deterministic. To investigate the characteristics of .eta. and .eta./sub apr/, 100 phase angles for two types of artificial amplitudes spectra are used in the analysis. .eta. and .eta./sub apr/, are almost constant regardless of amplitude type, position of a shell or type of responses; they fall into from 2.0 to 2.5. .eta./sub apr/ is always close to .eta., but tends to be somewhat greater. It may be concluded that a maximum responses of rotational shells subjected to uneven settlements are .eta./sub apr/ (about 2.5) times of its standard deviation. It is considered that this result is used when we design rotational shell structures subjected to differential settlements.

• Journal of the Korean earth science society
• /
• v.21 no.6
• /
• pp.675-682
• /
• 2000

25 seismic shot gathers were obtained to study the two dimensional subsurface shear wave velocities in a landfilled area near the Keum river estuary. Borehole(BH#1 and BH#2) tests at two sites were made in the same area. Standard Penetration Tests were also performed at the same time. The 2-D shear wave velocity structure resulted from the inversion of the seismic data shows that the subsurface of the studied area consists of the upper 1${\sim}$3 meter thick layer(200 m/sec${\sim}$700 m/sec), the middle 5${\sim}$8 m thick low velocity layer(100 m/sec${\sim}$400 m/sec), and the lower layer of 1000m/sec or higher shear wave velocities. The thickness of the low velocity layer decreases from the BH #1 site to the BH #2 site. The depth to the basement also decreases toward the BH #2 site. The examination of the S wave velocity structure, the description of the geologic contents, and the Standard Penetration Test values indicate that the middle layer of low shear wave velocity may be related to the clay content of the layer. On the other hand, the Standard Penetration test values increase with depth, showing no significant relationship with the geologic contents of the subsurface. This study shows that the inversion of surface waves can be effective in the study of the shear wave velocity, especially in the area where low velocity layers can be found. The method of inversion of surface waves also can be used as a viable technique to overcome the limit of the seismic refraction method.

• Journal of the Korean Society of Safety
• /
• v.23 no.5
• /
• pp.119-124
• /
• 2008

Many automobile assembly workers often do several cycles of tasks continuously, i.e., without breaks, to get a longer break. This is not recommended since the dose of fatigue increases exponetially with time and it takes much longer time to recover. In this study, a laboratory experiment was conducted to investigate the effect of work/rest schedules on workload of a repetitive upper-limb task. Eleven male subjects participated in the experiment, in which simulated screw driving tasks were carried out repetitively with 3 different work/rest schedules: standard breaks(1 cycle of work at a time, 60 20-s breaks), medium breaks(5 cycles of work at a time, 12 100-s breaks), and long breaks(10 cycles of work at a time, 6 200-s breaks). The result showed that medium- and long-breaks schedules significantly increased the level of perceived discomfort and %HRR as compared to the standard-break schedule. The subjects' preference was not statistically different among work/rest schedules, which might be caused from the absolutely low level of workload of the experimental tasks. From the results, it is recommended to have frequent and shorter breaks rather than infrequent and longer breaks to decrease the level of physical workload. A more expanded studies, however, should be carried out to provide more practical safety guidelines on the work practice of continuous working without breaks among automobile assembly workers.

• Journal of Nutrition and Health
• /
• v.3 no.2
• /
• pp.95-99
• /
• 1970

Korea is one of the typical rice eating countries where availability of animal protein is limited even for the growing generation. Nutritive food products for infants and children are not available commercially in large scale at the present time, although a limited amount of expensive milk products are produced. The present study deals with a pioneering attempt on a new food mixture to meet this demand. Several food mixtures, possibly produced in the country, consisting of rice, soybean, FPC, vitamin, minerals and other food additives are developed in this work Sixty female and male rats aged $30{\sim}40$ days were divided into five groups, twelve rats each. The rats had been maintained with the six different diets, as follow. Formulation of proposed infant food mixturesComposition F-R-1 F-S-2 F-F-3 F-P-4 S Rice 100% 40% 37% 46% 70% Sugar - 12 13 10 70 Casein - - - - 20 Bean - 40 37 24 - Yeast - 3 2 3 - Mineral Vitamain - 2 4 2 4.3 F.P.C - 3 4 7 - Fat - - 4 8 4 Cod liver Oil - - - - 3 The findings of this study presented in FER, PER, final organ weights, body weights growth, percentage of nitrogen retention in the body. F-P-4 group tended to remain the heaviest and F-R-1 the lightest in the body weight among three groups throughout the experimental period. In terms of FER (Feed Efficiency Ratio) and PER (Prortein E. R.) value, F-P-4 group kept the highest record throughout. F-P-4 group showed the highest value of nitrogen retention in the body. In comparision between F-P-4 groups and casein 20% group (standard) in all respects of this experiment, F-P-4 group which is the most superior among experimental group, revealed statisfically no significant inferior than that of standard group. This fact could be interpreted that most limiting a. a., methionine in the soy protein produced little inferiority of the experimental groups in the study.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.12
• /
• pp.1726-1730
• /
• 2000

High fibre (CF, 242 g/kg) sunflower seed meal (SSM) was incorporated in standard grower and layer quail diets at 0, 50, 75 or 100 g/kg replacing part of the soybean meal (SBM) and deoiled rice bran (DORB). Each grower diet was offered to 30 quails housed in battery cages from day one to 5 weeks of age. At the end of the growing period, Twelve female quails from each of the four respective dietary groups were transferred to the individual laying cages and their laying performance from 7 to 20 weeks of age were evaluated on diets containing SSM at similar levels as that during the growing period. The results of growth bioassay revealed that the live weight gain, feed intake, nutrient retention and carcass characteristics of quails in different dietary groups did not vary significantly (p>0.05), although the quails fed SSM based diets utilized the feed less (p<0.05) efficiently than those fed the control diet. During the laying period, the egg production and egg quality traits remained unaffected due to dietary treatments but feed required per unit egg production increased (p<0.05) as the level of SSM in diet was increased to 100 g/kg. Although, the cost of feed per kg decreased due to the incorporation of SSM in diet but the same was not reflected in feed cost per unit gain, meat or egg production as such parameters were comparable on all the diets. It could thus be concluded that the SSM can be incorporated in quail diets upto 100 g/kg for part of SBM, an item usually expensive and also in short supply in developing countries including India.

• Journal of Food Hygiene and Safety
• /
• v.29 no.1
• /
• pp.16-20
• /
• 2014

The prevalence of Bacillus cereus was determined in salad and Kimbab obtained from commercial retailers. Among the 100 salad samples analyzed, 54 samples were negative for B. cereus, whereas the bacterial count was < 10 colony forming units (CFU)/g in 8 samples, < 100 CFU/g in 25 samples, < 1,000 CFU/g in 11 samples, and > 1,000 CFU/g in 2 samples. The mean (standard deviation) was 1.18 log CFU/g (${\pm}0.71$ log CFU/g). In Kimbab, B. cereus was isolated from 20 samples; the mean bacterial count was 1.01 log CFU/g (${\pm}0.71$ log CFU/g). On the basis of the monitoring data, a statistical sampling plan was determined with the NEW sampleplan program (ICMSF), which was used as an analytical tool. To identify the most suitable sampling plan, the microbial limits (m, M) and the maximum allowable number of sample units yielding unsatisfactory test results (c) were varied, but the number of samples units, n = 5, was fixed. Sampling plans showing an acceptable probability (Pa) over 0.95 were considered suitable. Two plans (A and B) were finally suggested. Parameters for plan A are n = 5, c = 0, m = 1,000, and M = 10,000 and for plan B are n = 5, c = 2, m = 100, and M = 1,000. Interestingly, the latter plan was identical to the microbial sampling plan used in New Zealand. Thus, it was concluded that the suggested plan can be used as a sampling plan that is in line with international standards.

• Journal of Korean Academy of Nursing Administration
• /
• v.9 no.1
• /
• pp.89-101
• /
• 2003

Purpose : this study was to examine the effect of using a nursing standards for the quality of nursing care in musculo-skeletal patients. Method : The approach to nursing quality assurance evaluation was selected process-outcome framework. The subjects ware 100 case of musculo-skeletal patients in orthopedic surgery nursing care unit of E. university hospital in seoul. The data of a control group were collected from 23 December 2001 to 20 March 2002 and an experimental group were collected from 1 June to 25 August 2002. The instruments used for this study were a nursing care standards in musculo-skeletal disorder patients developed by the investigator and an evaluation tool for the quality of nursing care in orthopedic surgery patients developed by soon-ook Choi in 1995. It's reliability is Cronbach alpha=.8628. The data were analyzed by means of $x^1$-test, t-test, ANOVA with SPSS program. Results : This study are as fellows : 1. Scores of the quality of nursing care in standard 1 in the experimental group were higher than those of the control group with no significant difference(t=-8.793, p=.000), scores of the quality of nursing care in standard 2 in the experimental group were higher than those of the control group with significant difference(t=-8.793, p=.000) and standard 3 in the experimental group were higher than those of the control group with significant difference(t=-10.550, p=.000). scores of the quality of nursing care in standard 4 in the experimental group were higher than those of the control group with significant difference(t=-8.793, p=.000). scores of the quality of nursing care in standard 4 in the experimental group were higher than those of the control group with no significant difference(t=-1.833, p=.070). 2. Scores of the quality of nursing care in criteria 28 of 33 criteria in the experimental group were higher than those of the control group with significant difference in 12 criteria(p<.05 ). 3. Scores of the quality of nursing care in standard 1 to standard 4(process evaluation); the experimental group were higher than those of the control group with significant difference(t=-10.704, p=.000). scores of the quality of nursing care in standard 5(outcome evaluation); the experimental group were higher than those of the control group. but no significant difference(t=-1.833, p=.070). 4. Scores of the quality of nursing care in experimental group were higher than those of the control group with significant difference(t=-10.794, p=.000). Conclusion : Through this study, I'm sure that using a nursing care standards in musculo-skeletal disorder patients improve quality of nursing care and nursing care standards are effective nursing care.

• Food Science of Animal Resources
• /
• v.32 no.1
• /
• pp.103-111
• /
• 2012

This study was carried out to examine foodborne pathogenic contamination from 1,080 samples of cooked hams and sausages at 10 Korean processing facilities in 2010. The samples were collected from the six primary and additional sterilization products in same lot. To detect Salmonella spp., Staphylococcus aureus, Listeria monocytogenes and Clostridium perfringens in those products (n=1,080), the domestic standard method for Processing and Ingredients Specification of Livestock Products was used. As a result, Salmonella spp. was not detected in all 636 ham and 444 sausage samples. However, L. monocytogenes was detected in four (0.6%) ham and eight (1.8%) sausage samples from five manufactures. S. aureus was also only detected in 4 (0.6%) ham samples from two manufacturers, and C. perfringens was detected in 3 (0.5%) ham samples from three manufacturers, the contamination levels of these pathogens were less than 100 CFU/g. In conclusion, the results of this study indicate that the additional sterilization step of processing manufacturers could not assist to control the foodborne pathogenic bacteria.