• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.4
• /
• pp.441-448
• /
• 2015

In this paper, a CPW-fed dual-band monopole antenna with two branch strips for WLAN(Wireless Local Area Networks) applications was designed, fabricated and measured. The proposed antenna is based on a CPW-feeding structure, and composed of two branch strips and then designed and tuned the length of two branch lines to obtained required frequencies bands. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and carried out simulation about parameters $L_5$, $L_8$, $W_3$, $W_5$, $W_9$. The proposed antenna is fabricated on the FR-4 substrate using the obtained parameters. The numerical and experiment results demonstrated that the proposed antenna obtained the -10 dB impedance bandwidth 1,095 MHz (1.57~2.665 GHz) for 2.4 GHz band and 1,680 MHz (4.99~6.67 GHz) for 5 GHz band satisfied requirement while simultaneously covering the WLAN bands. And characteristics of gain and radiation patterns are determined for WLAN operating bands.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1549-1560
• /
• 2009

In the TDMA PON system, the DBA is essential for ONUs to send data efficiently to the upstream. In this paper, we implement a DBA processor for the G-PON OLT with downstream and upstream rate, 2.5 and 1.25 Gbps, respectively, The processor collects bandwidth request messages from ONUs at every cycle time and allocates properly bandwidth to each Alloc-ID with considering priority and fairness for traffics. In the proposed DBA algorithm, one cycle time consists of multiple G-PON frames ($m{\times}125{\mu}s$) for high link efficiency. In particular, the link efficiency is higher because the algorithm adopts a method that an additional overhead is eliminated when an allocated bandwidth is laid between two G-PON frames for an ONU. This enables that the processor flexibly allocates the bandwidth from zero to the maximum link capacity for an ONU. The proposed DBA processor is implemented with the FPGA and shows bandwidth allocating processes for ONUs with logic analyzer.

• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.84-89
• /
• 2017

This paper presents a dual-wideband bandpass filter (BPF) with high band-to-band isolation and skirt selectivity using distributed composite right/left-handed (CRLH) transmission line (TL) quad-mode resonators (QMRs). The results of the proposed distributed CRLH TL unit cell analysis are used to establish the scattering parameters and the resonance frequencies of the QMR constituting the dual-wideband BPF. A novel dual-wideband bandpass filter is designed and fabricated, using the derived scattering characteristics. The measured results show that the fabricated dual-wideband bandpass filter has an insertion loss of less than 1.08dB in the lower band, and of 2.01dB in the upper band, a bandwidth of 2.8-5.52GHz and 9.68-12.26GHz, and a band-to-band isolation of more than 38dB, from 6.34-8.42GHz.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.517-521
• /
• 2018

In this paper, we designed a microstrip antenna for LTE / WLAN for wireless mobile communication high - speed communication network. The substrate of the proposed antenna is FR-4 (er = 4.3), the size is $20[mm]{\times}40[mm]$ and can be used in the frequency band of 2.77 [GHz] and 5 [GHz] Respectively. The simulation was performed using CST Microwave Studio 2014. The simulation result shows that the gain is 2.034 [dBi] at 2.77 [GHz] and 4.95 [dBi] at 5 [GHz]. The S-parameter was also found to be less than -10 [dB] (WSWR 2: 1) in the desired frequency band. The frequency bands of LTE and WLAN are widely used around the world, and the usage of the frequency is also increasing. For this reason, the dual-band antenna of LTE / WLAN is designed to help many users in a good way to use both technologies.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.1 s.104
• /
• pp.74-80
• /
• 2006

This paper presents the characteristics of electromagnetic field uniformity in a reverberation chamber that can be used alternatively for the analysis, test and evaluation of electromagnetic interference and immunity. The dual-band diffuser, which can be used at two different frequency bands in a reverberation chamber, is applied, and it is made of two different single-band Schroeder's Quadratic Residue Diffusers. The FDTD method is used to analyze the field characteristics. Compared with single-band diffuser, the dual-band diffuser shows the improvement in not only expansion of test frequency band but also in characteristics of the field uniformity, polarity, power efficiency, and tolerance. Therefore, the reverberation chamber with the dual-band diffuser is a better facility, for the analysis and measurement of electromagnetic interference and immunity, than the reverberation chamber with a single-band diffuser.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.9
• /
• pp.1070-1076
• /
• 2007

In this paper, we study the characteristics of dual band microstrip antenna with the wedge-shaped radiation patch added the slot using air substrate. Wedge-shaped patch antenna with air substrate is avoided the large probe reactance associated with a thick substrate owing to the use of short probe and good impedance matching over a wide frequency range can be obtained. Slot on the antenna radiator varies the reactance component according to the employed frequency and affect the resonance freaqency of the antenna, therefore the antenna can resonate at the dual band(cellular and PCS band). The slot length and position have an effect on the bandwidth and input impedance of the antenna are optimized by simulation. From the experiment results for the fabricated antenna, -10 dB of $S_{11}$ is content with the allocated bandwidth of Cellular and PCS system and - 15 dB of cross polarization level. From the results of this paper, it has been confirmed that the proposed antenna can be used as the base station antenna fur Cellular and PCS band.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.5
• /
• pp.57-62
• /
• 1998

본 논문에서는 입력신호의 시변특성에 따라 분석 필터의 대역을 가변 시키는 필터 뱅크의 구조를 제안한다. 제안된 필터뱅크는 일반적으로 32개의 균일한 대역으로 나누어 임 계대역의 표현을 적절히 표현하지 못하는 Polyphase 필터의 단점을 극복하면서 시스템 설 계에 높은 계산량을 요구하는 QMF-tree 필터의 단점을 보완한다. 본 연구에서는 분할 대역 은 4개에서 26개의 대역으로 가변하고, 웨이블릿 필터중 Daubechies필터를 사용하였다. 제 안된 구조의 부호화기는 128kbps에서 MPEG-a오디오와 비슷한 수준의 CD 음질을 유지하 며, 연산량 비교결과는 PolyPhase filter를 이용한 MPEG보다 부호화, 복호화 과정을 합쳐 다양한 전송률과 음원에서 평균 19%의 감소를 얻었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2008.02a
• /
• pp.159-162
• /
• 2008

이 연구는 Ka대역 위성방송 서비스를 제공할 때 발생하는 강우감쇠문제를 해결하기 위하여 MPEG-4 SVC 신호를 이용하는 방안에 대하여 고찰하였다. Ka대역 위성방송시스템은 DVB-S2 VCM 모드를 고려하였으며, JSCC (Joint Source Channel Coding) 기법을 이용하여, SVC신호를 Ka대역 위성방송시스템에 적용하였다. SVC신호는 Spatial Scalability, SNR Scalability 및 Temporal Scalability로 구분되어서, PSNR값의 변화에 따른 비트율 변화정도를 분석하였다. 비트율 변화율이 가장 큰 Spatial Scalability를 적용한 SVC신호가 Ka대역 위성방송서비스의 강우감쇠 문제를 해결하기 위한 방안으로 제안되었으며, 이에 대한 분석이 수행되었다.

• Journal of Korea Multimedia Society
• /
• v.7 no.4
• /
• pp.518-531
• /
• 2004

This paper discusses a testbed architecture for implementing scalable service differentiation in the Internet. The differentiated services (DiffServ) testbed architecture is based on a model in which a bandwidth broker (BB) can control network resources, and the ALTQ can reserve resources in a router to guarantee a Quality of Service (QoS) for incoming traffic to the testbed. The reservation and releasemessage for the ALTQ is contingent upon a decision message in the BE. The BB has all the information in advance, which is required for a decision message, in the form of PIB. A signaling protocol between the BB and the routers is the COPS protocol proposed at the IETF. In terms of service differentiation, a user should make an SLA in advance, and reserve required bandwidth through an RAR procedure. The SLA and RAR message between a user and the BB has implemented with the COPS extension which was used between a router and the BB. We evaluates the service differentiation for the video streaming in that the EF class traffic shows superb performance than the BE class traffic where is a network congestion. We also present the differentiated service showing a better packet receiving rate, low packet loss, and low delay for the EF class video service.

• Journal of Advanced Navigation Technology
• /
• v.21 no.2
• /
• pp.193-199
• /
• 2017

In the paper, a dual band-notched monopole antenna is proposed for 2.4 GHz WLAN (2.4 ~ 2.484 GHz) and UWB (3.1 ~ 10.6 GHz) applications. The 3.5 GHz WiMAX band notched characteristic is achived by a pair of L-shaped slots instead of the previous U-shaped slot on the center of the radiating patch, whereas the 7.5 GHz band notched characteristic is achived by C-shaped strip resonator placed near to the microstrip feed line. The measured impedance bandwidth (${\mid}S_{11}{\mid}{\leq}-10dB$) is 8.62 GHz (2.38 ~ 11 GHz) which is sufficient to cover 2.4 GHz WLAN and UWB band, while measured band-notched bandwidths for 3.5 GHz WiMAX and 7.5 GHz bnad are 1.13 GHz (3.15 ~ 4.28 GHz) and 800 MHz (7.2 ~ 8 GHz) respectively. In particular, it has been observed that antenna has a good omnidirectional radiation patterns and higher gain of 2.51 ~ 6.81 dBi over the entire frequency band of interest.