• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.917-918
• /
• 2008

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.623-628
• /
• 1990

This paper describes the design of EFbus(ETRI Fieldbus), EFbus was designed from the interim results of international Fieldbus standardization in IEC (International Electrotechnical Commission) and proposals of many companies. The design was performed and described on the basis of three layered architecture. Application layer S/W runs on IBM PC and provides services which is similar ED MMS in MAP to user application Data linklayer runs on Intel's iDCX96 real time executive and uses centralized media accesscontrol method. Physical layer uses Manchester encoding & decoding, twisted pair fines and RS485 electrical standard.

• Electronics and Telecommunications Trends
• /
• v.38 no.2
• /
• pp.36-45
• /
• 2023

Segment routing (SR) is a source-based routing architecture in which a node steers packets adhering to service and topological requirements. Using programmable segments, SR enables end-to-end service connectivity to satisfy the network constraints of various services. SR can be implemented with both MPLS and IPv6 dataplanes. This survey presents the overview of SR for IPv6 dataplane (SRv6), network programming technologies based on SRv6, and the SR deployment status.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.4
• /
• pp.826-832
• /
• 2004

A CMOS 8 bit folding and interpolating ADC for an embedded system inside VLSI is presented in this paper. This folding ADC uses the 2 stage architecture for improving of nonlinearity. repeating the folding and interpolating twice. At a proposed structure, a transistor differential pair operates on the second folder. A ADC with 2 stage architecture reduces the number of comparators and resisters. So it is possible to provide small chip size, low power consumption and high operating speed. The design technology is based on fully standard 0.25m double-Poly 2 metal n-well CMOS Process. The simulated Power consumption is 45mW with an applied voltage of 2.5V and sampling frequency of 250MHz. The INL and DNL are within <ㅆㄸㅌ>$\pm$0.2LSB, respectively. The SNDR is approximately 45dB for input frequency of 10MHz.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.4
• /
• pp.136-147
• /
• 2021

Autonomous driving-related technologies are developing step by step by applying the degree of driving. It is essential that operational management technology for roads where autonomous vehicles move should also develop in line with autonomous driving technology. However, in the case of road operation management, it is currently managed using only two-dimensional information, showing limitations in the systematic operation management of lane and facility information and maintenance. This study proposed a plan to construct an operation management system architecture capable of 3D spatial information-based operation management by designing a convergence database that can process real-time big data with high-definition road map data. Through this study, when using a high-definition road map based operation management system for lane and facility maintenance in the future, it is possible to visualize and manage facilities, edit and analyze data of multiple users, link various GIS S/W and efficiently process large scale of real-time data.

• CDE review
• /
• v.11 no.2
• /
• pp.15-22
• /
• 2005

Presented in the paper is an approach to developing an intelligent mold shop as a means to overcome the difficulties faced by mold-makers due to skill shortages and increased global competition. A machine shop where as much as of the human skills are replaced by a set of intelligent systems is called an intelligent machine shop, and an intelligent mold-making machine shop is called an intelligent mold shop(MS). By analyzing the contents of operator's skill. three intelligent S/W stations have been designed: Technical Data Processing(TDP) Station, Loading Schedule Station, and Real-time Monitoring Station. A detailed architecture of the TDP station is described, and measures of effectiveness of IMS are elaborated.

• Proceedings of the CALSEC Conference
• /
• 2001.08a
• /
• pp.379-391
• /
• 2001

In this paper, we presented function catalogs that Internet content transcoding system for heterogeneous client devices must offer, and, we proposed content transcoding framework architecture that is good in extensibility. This transcoding framework can accommodate each transcoder in efficient way using device capability and user preference information based on W3C's CC/PP and Wap forum's UAProf specification. This architecture offers advantages that can add developed transcoder dynamically in Plug-In form later.

• Resources Recycling
• /
• v.27 no.1
• /
• pp.106-117
• /
• 2018

The present study was carried out to find a suitable drying method for the determination of non-evaporable water in hydraulic inorganic materials. In Part 1 of the paper, the case ordinary Portland cement was discussed and, in this Part 2, the case of alkali active slag (AAS) was investigated. Various drying methods including vacuum and oven drying, and an ignition, were used for the AAS system having different w/b, types and amounts of alkali activators. It was found that a combination of the vacuum and oven drying was a suitable drying method for the AAS case. Although a part of the crystallized water in hydration products was decomposed, but the free and adsorbed water could be completely evaporated and the deviation of the results was small.

• Horticultural Science & Technology
• /
• v.33 no.6
• /
• pp.845-853
• /
• 2015

The objective of this study was to predict the timing of nitrogen (N) demand through analyzing chlorophyll fluorescence (ChlF), soil-plant analysis development (SPAD), and normalized difference vegetation index (NDVI), which are positively correlated with foliar N concentration in star cluster (Pentas lanceolata). The plants were grown in potting soil under optimal conditions for 30 d, followed by weekly irrigation with five concentrations (0, 4, 8, 16, and 24 mM) of N for an additional 30 d. These five N application levels corresponded to leaf N concentrations of 2.62, 3.48, 4.00, 4.23, and 4.69%, respectively. We measured 13 morphological and physiological parameters, as well as the responses of these parameters to various N-fertilizer treatments. The general increases in Dickson's quality index (DQI), above-ground dry weight (DW), total DW, flowering rate, ${\Delta}F/Fm$', and qP in response to treatment with 0 to 8 mM N were similar to those of SPAD, NDVI, and Fv/Fm. Consistent and strong correlations ($R^2$= 0.60 to 0.85) were observed between leaf N concentration (%) and SPAD, NDVI, ${\Delta}F/Fm$', and above-ground DW. Validation of leaf S PAD, NDVI, and ${\Delta}F/Fm$' revealed that these vegetation indices are accurate predictors of leaf N concentration that can be used for non-destructive estimation of the proper timing for N-solution irrigation of P. lanceolata. Moreover, irrigation with 8 mM N-fertilizer i s recommended w hen leaf N concentration, SPAD, NVDI, and ${\Delta}F/Fm$' ratios are reduced from their saturation values of 4.00, 50.68, 0.64, and 0.137%, respectively.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1035-1038
• /
• 2005

This paper describes the designs and the implementations of two H/W IPSec Systems, look-aside and inline, on TOE (Transport Offloading Engine). These systems aim for guaranteeing the security of datagram networks while preserving the bandwidth of gigabit networks. The TOE offloads a host CPU from network burdens, so that it makes the gigabit wire speed possible, and then deeper level security architecture of the IPSec guarantees the security of gigabit service network dominated by datagram packets. The focus of this paper is to minimize the TOE's performance degradation caused by the computation-oriented IPSec. The look-aside IPSec system provides a significant improvement in the CPU offload of the IPSec cryptography loads. However, the inline system completely offloads the host CPU from whole IPSec loads, providing significant additional cost saving compared to the look-aside system. In this paper, the implementations of TOE cards including commercial IPSec processors are presented. As the result of performance evaluation with the protocol analyzer, we can get the fact that the inline IPSec system is 8 times faster than the S/W system and 2 times faster than the look-aside system.