• 한국분말재료학회지
• /
• 제13권4호
• /
• pp.269-277
• /
• 2006

[ ${\beta}-W(W_3O)$ ] oxide layer on the surface of each W(tungsten) nanopowder produced by the electric explosion of wire(EEW) process were formed during the 1vol.% air passivation process. The oxide layer hindered sintering densification of compacts during SPS process. The oxide phase was reduced to the pure W phase during SPS. The W nanopowder's compacts treated by the hydrogen reduction showed high sintered density of 94.5%. after SPS process at $1900^{\circ}C$.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.938-941
• /
• 2005

Recently We make a study of the process expert system model in 2005 process expert system concepts is applied to the digital meister expert system development. Well-designed expert systems imitate the reasoning processes experts use to solve specific problem. Specially, expert systems are used to the engineer in manufacturing industry fur the process control, production management and system management. In this paper, we propose the digital moister expert system fur product design process in manufacturing industry and we present introduction and contents of design process expert system methodology and software far the air purifier design system.

• 한국환경과학회지
• /
• 제30권7호
• /
• pp.597-604
• /
• 2021

The International Maritime Organization (IMO) ballast water management agreement (International Convention for the Control and Management of Ship's Ballast Water and Sediments) came into force on September 8, 2017. This study evaluated the disinfection performance of electrolysis, UV treatment, and electrolysis + UV combined, to improve the treatment of zooplankton (size ≥ 50 ㎛), which is expected to strengthen the standards for biodegradation efficiency. Among the methods used, the disinfection time leading to 100% death was in the order: electrolysis > electrolysis + UV > UV process. For the same level of disinfection performance, the amount of electricity required for the electrolysis, UV, and electrolysis + UV processes were 1,300 W.s, 8,400 W.S, and 4,500 W.s, respectively. The combination of electrolysis + UV process for inactivation of zooplankton in ballast water did not show a synergic effect owing to the slow disinfection time and high power consumption.

• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1725-1728
• /
• 2009

본 연구개발에서는 정해진 환경에서 최대의 불량검출 능력을 발휘할 수 있도록 공정을 개선하기 위하여 전게이트 시각검사에 필수적인 FGV 패턴발생 장치와 공정제어 장치를 개발하였다. 본 연구개발을 통하여 접촉손실(Tact Loss)을 0에 근접 한 수준으로 유지할 뿐만 아니라 손실 및 에러 발생시 신속한 대처가 가능하여 모듈의 수율을 향상시킬 수 있을 것으로 기대된다. 또한 세부 동작 시퀀스를 제어하기 위한 H/W와 S/W 시스템을 생산라인에 실장하고 성능점검 및 인증을 수행한 결과 Tact에 의한 Pixel 불량의 경우는 98.1%, Line 불량의 경우는 99.1%의 검출율을 나타내었으며, Gate 및 Visual 레벨 테스트를 포함한 모듈공정 전체의 수율이 98.3%까지 증가하였다.

• 한국문헌정보학회지
• /
• 제6권
• /
• pp.87-103
• /
• 1979

Information storage and retrieval is a part of general communication process. In the Shannon's information theory, information contained in a message is a measure of -uncertainty about information source and the amount of information is measured by entropy. Indexing is a process of reducing entropy of information source since document collection is divided into many smaller groups according to the subjects documents deal with. Significant concepts contained in every document are mapped into the set of all sets of index terms. Thus index itself is formed by paired sets of index terms and documents. Without indexing the entropy of document collection consisting of N documents is $log_2\;N$, whereas the average entropy of smaller groups $(W_1,\;W_2,...W_m)$ is as small $(as\;(\sum\limits^m_{i=1}\;H(W_i))/m$. Retrieval efficiency is a measure of information system's performance, which is largely affected by goodness of index. If all and only documents evaluated relevant to user's query can be retrieved, the information system is said $100\%$ efficient. Document file W may be potentially classified into two sets of relevant documents and non-relevant documents to a specific query. After retrieval, the document file W' is reclassified into four sets of relevant-retrieved, relevant-not retrieved, non-relevant-retrieved and non-relevant-not retrieved. It is shown in the paper that the difference in two entropies of document file Wand document file W' is a proper measure of retrieval efficiency.

• 산업경영시스템학회지
• /
• 제12권20호
• /
• pp.71-76
• /
• 1989

In this paper, GERT network in modeled to improve the network of manufacturing process with feedback loop. A lot of Information on the GERT network can be derived from the equivalent W-function and MGF(moment generating function) using Mason's rule. These equations are used in calculating the variations of the performance measure and in improving the system performance. System improvement in manufacturing process is achieved by increasing the equivalent probabilities of each branches and by decreasing the expected equivalent time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.216-217
• /
• 2007

In this study, we analyzed the electrical loss characteristics between ribbon and output terminal of constituent material according to electrical resistance during interconnection process of PV module. From this result, the electrical output power reduction rate caused by interaction between ribbon and cell's interconnection was 2.88%. There was 1W electrical output power reduction through the 16 solar cells. So it is expected that the wider size of PV module gives the higher loss in electricity production. Also, the average output power of PV module passed lamination process was increased by 0.081W per one solar cell and the increase rate was 3.7%.PV module's electrical loss before and after lamination process according to constituent material's terminal was 0.49W and 0.50W, respectively.

• 소성∙가공
• /
• 제15권5호
• /
• pp.354-359
• /
• 2006

The elastomer forming process was employed for many operations which included piercing, sheet metal forming and tube metal forming process. This paper presents cylindrical tube forming process using rubber material such as polyurethane. For elastomer forming process, tensile tests at room temperature were performed to obtain the material properties of polyurethane and tube. In particular, biaxial tensile test were carried out to obtain the coefficient of strain energy function of the rubber material. Finite element analyses were also carried out to investigate the forming load and formability of tube. It was compared with the experimental results about the forming load and the formability of tube. From these results, it was investigated a forming process to decrease the forming load for elastomer forming process.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2002년도 제23회 학술발표회 초록집
• /
• pp.172-173
• /
• 2002

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.401-402
• /
• 2009