• Korean Journal of Food Science and Technology
• /
• v.27 no.2
• /
• pp.225-229
• /
• 1995

Soy oligosaccharide, a low calorie sugar, which is known to improve the intestinal microbial flora, was recovered from the waste of soymilk process by Steffen process. To remove protein contaminants, prior to the Steffen process, pH of the sample was adjusted to $3.5{\sim}4.0$ or calcium chloride was added 8%(w/w) per sugar. Both pretreatment processes were found to remove about $25{\sim}30%$ of the protein initially present in the sample. Using the Steffen process, as much as 85% of soy oligosaccharide could be recovered as a saccharate form. The amounts of calcium chloride and lime used were 20%(w/w) and $100{\sim}120%$(w/w) per total sugar, respectively. After the sugar was desorbed by $CO_{2}$, the final yield of oligosaccharide was 80% while 80% of protein were removed from the original solution. The composition of sugar was similar to that of soybean cooking water.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.32 no.4
• /
• pp.37-50
• /
• 2007

Dramatic development of information technology requires new type of sales strategy to enterprise S/W dealers. That is, one should thoroughly consider diversified types of enterprise S/W and more elaborated consumer needs to establish successful sales strategy. However, various factors that should be considered in establishing enterprise S/W sales strategy are different according to types of enterprise S/W and hard to be managed systematically which led to the current situation where they have not been discussed enough. Therefore, this study introduced the relationship between the factors that affect selection of enterprise S/W using the concept of cognitive map on various enterprise S/W sales cases. Through this process, this study grouped the cognitive maps of similar cases to introduce their characteristics and made this result to be practically useful to enterprise S/W sales strategy.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.531-532
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.745-746
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.721-722
• /
• 2009

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.281-284
• /
• 2009

Flexible forming process for sheet metal using reconfigurable die is introduced based on numerical simulation. Numerical simulation of sheet metal forming process is carried out by using flexible dies model instead of conventional matched die set. Elastic cushion which has high resilience behavior from excessive deformation are inserted between forming punches and blank material for smoothing the forming surface which has discrete due to characteristics of the flexile die. As an elastic cushion, urethane pads are utilized using hyperelastic material model in the simulation. Formability in view of surface defect such as onset of dimple is compared with regard to various punch sizes. Consequently, it is confirmed that the flexible forming process for sheet material has appropriate capability and feasibility for manufacturing of smoothly curved surface instead of conventional die forming process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.114-117
• /
• 2005

An expert system is a system that employs human knowledge captured in a computer to solve problem that ordinarily require human expertise. Well-designed expert systems imitate the reasoning processes experts use to solve specific problem. Specially, expert systems are used to the engineer in manufacturing industry for the process control, production management and system management. In this paper, we propose the design process expert system for product design process in manufacturing industry and we present introduction and contents of design process expert system methodology and software for the air purifier design system. This system will be helpful to improvement of design process for the air purifier production.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.10a
• /
• pp.64-66
• /
• 1988

The present investigation has been performed on the manufacturing process of Ni-P doped W-Cu electric contacts by infiltration techniques. The addition of small amount of Ni-P alloy aimed at forming a rigid and homogeneous skeleton structure of W-powders which favours subsequent infiltration process of Cu-melts. The experimental results revealed that the small addition of Ni-P alloy appreciably enhances the sintering process of W at low temperatures (even at 1000$^{\circ}C$), simultaneously causing a considerable change of skeleton Morphology and its related best infiltration behaviour of Cu-melts.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.210-213
• /
• 2005

Recently a number of parts have a tendency to be a module for saving weight, cost, process and high quality in automotive industry. The forming process to combine automotive rack tube which was consisted on many parts is various. This paper presents tube forming process using elasto-forming process. We investigated the properties of rubber and tube by Finite Element Analysis. And it was compared with the experimental results for the formability of tube. we was to suggest a forming process using moving die for elasto-forming process, and through this improvement we could get the good formability.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.222-225
• /
• 2008

We proposed the dry etching process recipe for the fabrication of In-Ga-Zn-O (IGZO)-based oxide TFTs, in which the etching behaviors of IGZO films were systematically investigated when the etching gas mixtures and their mixing ratios were varied. Good device characteristics of the fabricated TFT were successfully confirmed.