• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.776-781
• /
• 2001

To enhance thermal efficiency of thermal facility through recovery of low and medium temperature waste heat, 1MW organic Rankine cycle system was designed and developed. The exhaust gases of $175^{\circ}C$ at two 100MW power plants in pohang steel works were selected as the representative of low and medium temperature waste heat in industrial process for the heat source of the organic Rankine cycle system. HCFC-123, a kind of harmless refrigerant, was chosen as the working fluid for Rankine cycle. The organic Rankine cycle system with selected exhaust gases and working fluid was designed and constructed. From the operation, it was confirmed that the organic Rankine cycle system is available for low and medium temperature waste heat recovery in industrial process. The optimum operating manuals, such as heat-up of hot water, turbine start-up, and the process of electric power generation, were derived. However, electric power generated was not 1MW as designed but only 670kW. It is due to deficiency of pump capacity for supply of HCFC-123. So it is necessary to increase the pump capacity or to decrease the pressure loss in pipe for more improved HCFC-123 supply.

• 소성∙가공
• /
• 제15권6호
• /
• pp.445-452
• /
• 2006

In most of automobile body panel manufacturing, trimming process is generally performed before flanging. To find feasible trimming line is crucial in obtaining accurate edge profile after flanging. Section-based method develops blank along manually chosen section planes and find trimming line by generating loop of end points. This method suffers from inaccurate results of edge profile. On the other hand, simulation-based method can produce more accurate trimming line by iterative strategy. In this study, new fast simulation-based method to find feasible trimming line is proposed. Finite element inverse method is used to analyze the flanging process because final shape after flanging can be explicitly defined and most of strain paths are simple in flanging. In utilizing finite element inverse method, the main obstacle is the initial guess generation for general mesh. Robust initial guess generation method is developed to handle genera] mesh with very different size and undercut. The new method develops final triangular mesh incrementally onto the drawing tool surface. Also in order to remedy mesh distortion during development, energy minimization technique is utilized. Trimming line is extracted from the outer boundary after finite element inverse method simulation. This method has many advantages since trimming line can be obtained in the early design stage. The developed method is verified by shrink/stretch flange forming and successfully applied to the complex industrial applications such as door outer flanging process.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.414-419
• /
• 2001

Microcellular foamed plastic is a foaming technology that is safer to the environment and has no significant deterioration of mechanical properties compared to the conventional foamed plastic. Currently, the development of the injection-molding machine for microcellular plastic (MCP) is nearing completion. Currently, researches on the mass production system for the MCP injection-molding machine are under progress. The purpose of this paper is to design the gas supply system suitable for microcellular foaming in the injection-molding machine. For the design process, Axiomatic Approach, a powerful tool for design, will be used.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.932-935
• /
• 2005

Three dimensional laser welding technology for light car body is studied. A robot, a seam tracking system and 4kW CW Nd:YAG laser are used for three dimensional robot laser welding system. The Laser system is used 4kW Nd:YAG laser(HL4006D) of Trumpf and the Robot system is used IRB6400R of ABB. The Seam tracking system is SMRT-20LS of ServoRobot. The welding joint of steel plate are butt and lap joint. The 3-D welding for Non-linear Tailored blank is performed after the observation experiments of bead on plate. Finally, the welding process for non-linear tailored blank and front side member is developed.

• 한국위성정보통신학회논문지
• /
• 제12권4호
• /
• pp.120-124
• /
• 2017

본 논문은 동역학 모델을 적용한 양방향 군 탐색구조 시스템의 시작품 제작에 대한 내용을 기술한다. USRP 개발 플랫폼과 단말기와 위성간의 통신을 상용 LTE망에 COSPAS-SARSAT 규격인 Spread Spectrum 방식의 신호체계를 USRP에 구현한 결과이다. 또한 구현된 결과의 정당성을 확인하기 위해 동역학 모델을 적용한 COSPAS-SARSAT 기반의 RF신호 처리를 USRP 테스트베드에 적용하여 실제적인 성능평가를 수행하였다. 향후 TDOA와 FDOA의 상관관계를 이용하는 CAF 알고리즘을 이용하여 보다 정확한 지상측위에 적용하고자 한다.

• 전자통신동향분석
• /
• 제38권3호
• /
• pp.38-46
• /
• 2023

The value of living a long and healthy life without suffering has increased owing to aging populations, transition to welfare societies, and global interest in health deriving from the novel coronavirus disease pandemic. New drug development has gained attention as both a tool to improve the quality of life and high-value market, with blockbuster drugs potentially generating over 10 billion dollars in annual revenue. However, for newly discovered substances to be used as drugs, various properties must be verified over a long period in a time-consuming and costly process. Recently, the development of artificial intelligence technologies, such as deep and reinforcement learning, has led to significant changes in drug development by enabling the effective identification of drug candidates that satisfy desired properties. We explore and discuss trends in artificial intelligence for de novo drug design.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.341-344
• /
• 2008

Plastics is commonly used in consumer electronics because of it is high strength per unit mass and good productivity. But. using, transporting, and keeping of plastic component was happened post-deformation. As time goes by and temperature is changed, the post-deformation causes the problems of exterior design and performance. But, it is difficult to estimate the post-deformation by only thermal deformation analysis. Also, the estimation technique of the pest-deformation must be easily applied to product development and it should be reliable because development time of product is limited. In the paper. the process to predict the post deformation under cyclic thermal loadings was suggested. The process was applied to the real panel, and the deformation predicted by the analysis was compared with that of real test, which showed the possibility of applying the suggested process to predict the post deformation of plastic product under thermal loadings.

• 열처리공학회지
• /
• 제17권6호
• /
• pp.346-355
• /
• 2004

The flame quenching process has been employed to modify the surfaces of commercial marine propeller material, aluminum bronze alloy (Cu-8.8Al-5Ni-5Fe), and the microstructure, hardness and wear properties of the flame-quenched layers have been studied. The thermal history was accurately monitored during the process with respect to both the designed maximum surface temperature and holding time. The XRD and EDX analyses have shown that at temperatures above $T_{\beta}$, the microstructure consisting of ${\alpha}+{\kappa}$ phases changed into the ${\alpha}+{\beta}^{\prime}$ martensite due to an eutectoid reaction of ${\alpha}+{\kappa}{\rightarrow}{\beta}$ and a martensitic transformation of ${\beta}{\rightarrow}{\beta}^{\prime}$. The ${\beta}^{\prime}$ martensite phase formed showed a face-centered cubic (FCC) crystal structure with the typical twinned structure. The hardness of the flame-quenched layer having the ${\alpha}+{\beta}^{\prime}$ structure was similar to that of the ${\alpha}+{\kappa}$ structure and depended sensitively on the size and distribution of hard ${\kappa}$ and ${\beta}^{\prime}$ phases with depth from the surface. As a result of the sliding wear test, the wear resistance of the flame-quenched layer was markedly enhanced with the formation of the ${\beta}^{\prime}$ martensite.

• 한국결정성장학회지
• /
• 제18권1호
• /
• pp.45-49
• /
• 2008

태양광 산업의 성장에 따른 개선된 실리콘 잉곳 제조 방법의 개발은 중요한 이슈 중 하나이다. 단결정 실리콘 웨이퍼에 비해 가격 변에서의 유리함으로 인해 현재 다결정 실리콘 웨이퍼가 태양광 시장의 60% 이상을 점유하고 있으며 주조법, 열교환법, 전자기 주조법 등을 포함한 몇 가지 응고 공정들이 개발되어 오고 있다. 이 논문에서는 ADS 법을 이용하여 대형 다결정 실리콘을 성장하기 위한 공정모사를 수행하였다. ADS 법은 적은 열 손실, 짧은 공정 시간 및 효율적인 방향성 응고가 가능하다는 장점을 가지고 있다. ADS 공정의 수치해석은 온도 분포를 확인하기 위해 유체역학을 적용하였고, 공정모사 결과 240 kg 이상의 대형 다결정 실리콘 잉곳의 효율적인 방향성 응고가 가능함을 확인하였다.

• Patent21
• /
• 통권93호
• /
• pp.30-37
• /
• 2011

지적재산(IP)은 때때로 이해당사자들 간의 이익에 대항하여 신뢰의 기반을 약하게 만들고 그 과정을 더디게 만들지만, 표준 발전에 있어서는 필수적이다. 더디게 진행되거나 실재하지 않는 표준의 발전은 국제적으로 인정된 표준을 발전시킬 수 있는 잠재적 시장의 손실로 직결된다. 표준 발전 기관들(SDO)은 공정성과 신뢰를 확실히 다짐으로써 새로운 시장을 형성할 수 있다. IEEE 표준 협회 (IEEE-SA)는 표준발전기관으로서, 국제적으로 인정된 특허 정책을 가지고 그 결과를 용이하게 만들 수 있도록 특정한 단계를 정의하고 있다. 이 칼럼은 IEEE-SA의 정책 수립에 지침서가 되는 근본적인 원칙들과, 정책의 다섯 가지 주요 요소들을 설명하고, 표준개발자들과 관계자들이 표준 형성 과정의 성공과 시장발전의 도모를 위한 특정한 기대치에 동의할 수 있도록 하는 IP와 표준의 통합과정을 제시한다.