• Journal of Biosystems Engineering
• /
• 제23권4호
• /
• pp.373-380
• /
• 1998

The contribution of this paper is to provide the methods for the production automation of potato microtuber using the vision process in growth monitoring. The first method deals with computation for the growth density in the primary growth process. The second method addresses cognition process to identify the number and the volume of potato microtuber in secondary growth process. The third is to decide whether potato microtubers are infected by a virus or bacteria in growth process. The computation for the growth density in the primary growth process uses the method of Labeling. The second and third methods use template matching based on color patterns. With the developed method using vision process, this experiment is capable of discriminating weekly growth-rate in primary growth process, 85% cognition rate in secondary process and identifying whether there are infections. Therefore, we conclude that our experimental results are capable of growth monitoring for mass production of potato microtubers.

• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1725-1728
• /
• 2009

본 연구개발에서는 정해진 환경에서 최대의 불량검출 능력을 발휘할 수 있도록 공정을 개선하기 위하여 전게이트 시각검사에 필수적인 FGV 패턴발생 장치와 공정제어 장치를 개발하였다. 본 연구개발을 통하여 접촉손실(Tact Loss)을 0에 근접 한 수준으로 유지할 뿐만 아니라 손실 및 에러 발생시 신속한 대처가 가능하여 모듈의 수율을 향상시킬 수 있을 것으로 기대된다. 또한 세부 동작 시퀀스를 제어하기 위한 H/W와 S/W 시스템을 생산라인에 실장하고 성능점검 및 인증을 수행한 결과 Tact에 의한 Pixel 불량의 경우는 98.1%, Line 불량의 경우는 99.1%의 검출율을 나타내었으며, Gate 및 Visual 레벨 테스트를 포함한 모듈공정 전체의 수율이 98.3%까지 증가하였다.

• International Journal of Concrete Structures and Materials
• /
• 제19권1E호
• /
• pp.25-32
• /
• 2007

The fracture energy evaluated from the previous experimental results can be simulated by using the modified singular fracture process zone (S-FPZ) model. The fracture model has two fracture properties of strain energy release rate for crack extension and crack close stress versus crack width relationship $f_{ccs}(w)$ for fracture process zone (FPZ) development. The $f_{ccs}(w)$ relationship is not sensitive to specimen geometry and crack velocity. The fracture energy rate in the FPZ increases linearly with crack extension until the FPZ is fully developed. The fracture criterion of the strain energy release rate depends on specimen geometry and crack velocity as a function of crack extension. The behaviors of micro-cracking, micro-crack localization and full development of the FPZ in concrete can be explained theoretically with the variation of strain energy release rate with crack extension.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.183-184
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.787-788
• /
• 2007

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1649-1652
• /
• 2006

2.22-inch qVGA $(240{\times}320)$ amorphous silicon thin film transistor liquid active matrix crystal display (${\alpha}$- Si TFT-AMLCD) panel has been successfully demonstrated employing a 2.5 um fine-patterning technology by a wet etch process. Higher resolution 2.22-inch qVGA LCD panel with an aperture ratio of 58% can be fabricated because the 2.5 um fine pattern formation technique is combined with high thermal photo-resist (PR) development. In addition, a novel concept of unique ${\alpha}$-Si TFT process architecture, which is advantageous in terms of reliability, was proposed in the fabrication of 2.22-inch qVGA LCD panel. Overall results show that the 2.5 um finepatterning is a considerably significant technology to obtain higher aperture ratio for higher resolution ${\alpha}$-Si TFT-LCD panel realization.

• 제어로봇시스템학회논문지
• /
• 제6권10호
• /
• pp.888-893
• /
• 2000

This paper deals with the development of an automatic design software for DC servo motor control, which provides good performance with rapid response and velocity control accuracy. In the proposed method, the design is automatically executed using Matlab, and iterative learning control algorithms are used in the design process. We applied this method to 50W, 100W, 200W, 300W, 500W, 750W, 1.8kW and 4.5kW DC servo motors which are widely used in the industry. We compare the results of the manual tuning design method with that of the automatic design method presented in this paper. From the experimental results, we can find that the performance of the proposed method is better than that of the manual tuning design method.

• 한국산학기술학회논문지
• /
• 제12권4호
• /
• pp.1812-1816
• /
• 2011

본 연구에서는 약액 주입 후 미 도포로 인한 복합적인 공정불량을 예방하기 위하여 100nm 이하의 나노 반도체 제조공정에서 필수적인 스피너(spinner) 장비를 위한 약액 흐름제어 시스템을 개발하였다. 본 연구개발을 통하여 실시간으로 상태요소들을 감시할 뿐만 아니라 상태요소의 비정상적 변화나 웨이퍼 가공불량이 발생할 경우 해당 유니트를 정지시킴과 동시에 원격지에 있는 엔지니어에게 경보를 전송함으로써 즉각적인 대처가 가능하여 모듈의 수율을 향상시킬 수 있을 것으로 기대된다. 또한 세부 동작 시퀀스를 제어하기 위한 H/W와 S/W 시스템을 생산라인에 실장하고 성능점검 및 인증을 수행한 결과 5가지의 유형별 비정상적 프로세스를 정확히 검출하였다.

• 대한조선학회논문집
• /
• 제44권2호
• /
• pp.174-179
• /
• 2007

The cutting automation of boat's wooden pattern is strongly required to improve the productivity and quality of boats in leisure boat industry. This paper is concerned with the development of wooden pattern machining technology by the machining center. The leisure boat is designed with a 3 dimensional design s/w. The NC cutting data are generated in a CAM s/w and are verified using verification s/w. The cutting forces are monitored to analyse the cutting process. The surface characteristics of machined surface are investigated at various cutting conditions such as spindle speed, feed speed, the cutting direction of wood, and wood material.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.223-226
• /
• 2012

Biomass to Liquid (BTL) is an attractive option for using biomass as an renewable energy. A syngas supplying system has been designed for BTL system, based on the Fischer-Tropsche (FT) process, and long-term operation test was conducted. The syngas supplying system is composed of a fluidized bed gasifier, gas cleaning and compression system, and methanol absorption system. Stable operation of more than hundred hours was achieved with several champaigns. In addition, a pilot scale biomass gasifier has been developed for 1 bbl/day BTL system and its performance was evaluated. Some preliminary results and current status of the development of BTL system will be presented.