• 제목/요약/키워드: S/U analysis

검색결과 3,276건 처리시간 0.038초

국외 재난원인조사기구의 운영 현황 및 기능분석 (Analysis of the Operation Status and Function based on the Overseas Accident Investigation Agency)

  • 이경수;양승호;김연주;박지혜;김태훈;김현주
    • 한국재난정보학회 논문집
    • /
    • 제17권3호
    • /
    • pp.442-453
    • /
    • 2021
  • 연구목적: 본 연구에서는 국외 선진 조사기구의 운영현황을 조사하고 착안점 도출을 통해 우리나라 조사기구가 나아가야 할 방향을 고찰하고자 한다. 연구방법: 미국, 일본, 스웨덴 등 선진 조사기구의 설립배경, 조직구성, 주요업무 및 기능, 사고조사 절차 등 조직 운영 현황과 기능을 조사하였다. 연구결과: 첫째 모든 조사기구들의 설립 목적과 기능은 유사 재난·사고의 재발방지를 위함이며, 원인조사, 법·제도·정책 등의 개선권고, 권고사항에 대한 이행점검 등을 주요업무로 하고 있다. 둘째, 중립적 입장에서 공정한 조사가 가능하도록 부처 소속이 아닌 대통령 직속의 독립기구로 운영하고 있다. 셋째, 조사결과의 전문성을 인정받을 수 있는 권위를 보유하고 있다. 즉, 전문성 축적이 가능한 상시 전문인력 확보를 통한 상설조직으로 운영하고 있으며, 심층조사와 수준높은 권고안 마련을 통해 조사결과에 대한 권위를 확보하고 있다. 결론: 국외 재난조사 기구는 국가적 요구와 사회적 재난 갈등을 해소하기 위해, 원인조사의 공정성, 정확성과 전문성을 강화함과 동시에 독립성을 확보하고, 대규모 재난시 국가 차원의 신속한 사고조사 운영실태를 총괄·조정하기 위하여 조직의 위상을 확보하고 있다. 유사재난·사고의 악순환이 반복되는 것을 방지하기 위해서 우리나라는 부처별로 분산된 조사 기능을 효율적으로 연계할 필요가 있다. 또한, 다수부처와 관련된 재난·사고 발생 시 국가차원에서 총괄·조정 및 컨트롤타워를 구성·운영할 수 있도록 제도적인 개선이 필요하다.

느릅나무 자연집단(自然集團)의 시과(翅果), 종자(種子), 발아(發芽) 및 생장특성(生長特性) 변이(變異) (Variation of Samara, Seed, Germination and Growth Characteristics of Ulmus davidiana var. japonica Nakai Populations)

  • 송정호;장경환;임효인;박완근;배관호
    • 한국산림과학회지
    • /
    • 제100권2호
    • /
    • pp.226-231
    • /
    • 2011
  • 약용식물 느릅나무의 유전자원보존을 위하여 5개 자연집단을 대상으로 시과, 종자, 발아 및 생장특성에 대한 집단간 및 개체간 변이를 조사하였다. 전체 32개 개체목에서 시과를 채취하여 시과 및 종자특성(10개), 발아특성 (3개) 및 생장특성(2개)을 포함하여 총 15개의 특성을 분석하였다. 분산분석 결과 모든 특성에서 집단간 및 개체간에 고도의 유의적인 차이가 인정되었다. 평균특성을 살펴보면, 시과길이 13.0 mm, 시과폭 9.7 mm, 시과지수 1.37, 시과 무게 0.015 g, 과경길이 3.07 mm, 종자길이 3.85 mm, 종자폭 2.66 mm, 종자지수 1.46, 종자두께 1.29 mm, 종자무게 0.0062 g, 발아율 34.8%, 평균발아일수 8.6일, 발아속도 3.5개/일, 수고 37.7 mm, 근원경 4.90 mm로 나타났다. 특히, 시과무게, 발아율, 발아속도, 수고 및 근원경 특성은 집단간 및 개체간에 30% 이상의 높은 변이계수 값을 나타냈다. 느릅나무 집단간 유연관계는 지리적 분포에 따른 특별한 경향은 나타나지 않았으며, 유집군의 유형에 대한 주성분 분석 결과 제4주성분까지가 누적변이 값이 100%를 설명하였다. 제1주성분의 기여율은 41.8%로 형질간 상관분석에서 중요성이 높았던 인자들이었고, 제2주성분의 기여율은 32.9%로 발아특성이었으며, 제3주성분의 기여율은 16.3%로 생장특성이 느릅나무 집단간 유연관계에 중요한 정보를 주는 요인으로 나타났다.

전통어로방식-어살의 전승과 더 좋은 죽방렴 멸치의 생산: 남해안 죽방렴의 구조 변화와 어업방식을 중심으로 (Passing Down Traditional Fishing Methods Using Fish Weirs and the Production of Better Bamboo Weir Anchovies: Focusing on Structural Changes to Bamboo Weirs and Fishing Methods on the Southern Coast)

  • 전경호
    • 헤리티지:역사와 과학
    • /
    • 제55권3호
    • /
    • pp.132-150
    • /
    • 2022
  • 국가무형문화재로 지정된 어살은 전통어로방식의 하나로 우리나라 연안어업을 대표하는 어구였다. 그런데 1970년대 이후 연근해 어선어업이 발달하면서 어살을 포함한 전통어로방식은 상대적으로 쇠퇴하기 시작하였다. 현재 어살은 돌살과 죽방렴 형태로 전승되고 있는데, 경상남도 남해군과 사천시에서는 죽방렴을 이용하여 멸치를 어획하고 있다. 죽방렴의 기본 형태는 물고기가 모이는 공간인 '발통'과, 조류에 의해 물고기가 발통 안으로 들어가게 도움을 주는 V자 혹은 U자 형태의 '할가지'로 구성되어 있다. 어업방식은 밀물 때 연안으로 들어왔다가 썰물 때 조류를 따라 발통 안에 갇힌 물고기를 그물이나 뜰채로 어획한다. 이 논문에서는 남해와 사천 지역의 죽방렴 구조와 어업방식의 비교분석을 통해 전통어로방식의 전승 과정을 알아보았다. 먼저 현재의 죽방렴 구조가 완성되는 역사적 과정을 분석했다. 과거 방렴과 어살의 공존 속에서 두 어구의 특성을 조합한 죽방렴이라는 어구가 지족해협과 삼천포해협을 중심으로 완성된 것으로 보인다. 다음으로는 물고기가 모이는 공간(발통)이 원형이거나 방형으로 만들어진 두 가지 형태의 죽방렴의 구조와 어업방식에 대해서 살펴보았다. 이를 통해 자연환경에 순응하고, 획득 가능한 자원(재료)을 적극 활용하면서 죽방렴 어업이라는 전통 어로기술을 변화시켜 적합한 기술로 발전시킨 어민들의 모습을 살펴보았다. 마지막으로는 죽방렴 멸치에 부여된 새로운 가치를 분석하였다. 더 좋은 멸치라는 죽방렴 멸치의 새로운 가치는 다른 멸치어업에 비해 소량 생산되는 죽방렴 멸치어업의 명맥을 유지시켜 주는 하나의 기제로 작동하고 있다. 이처럼 죽방렴 어업은 전통어로방식을 전승하고 있다는 역사성과 함께 다른 어로를 통해서 생산한 멸치보다 더 좋은 멸치라는 차별성까지 획득하면서 계승되고 있다.

최저임금과 생산성: 우리나라 제조업의 사례 (Minimum Wage and Productivity: Analysis of Manufacturing Industry in Korea)

  • 김규일;육승환
    • 경제분석
    • /
    • 제26권1호
    • /
    • pp.1-33
    • /
    • 2020
  • 최저임금 인상 관련 논의가 고용인원 수와 같이 양적 측면에 국한되면서 부정적 효과가 주로 부각되어 왔지만, 최저임금 인상은 기업 또는 산업 특성에 따라 생산성 제고, 저생산성 한계기업 퇴출 등 질적 측면에서 긍정적 효과를 가져올 수도 있다. 본 연구는 이러한 관점에서 최저임금 인상이 기업의 생산성에 미친 영향을 실증적으로 분석하였다. 실증분석을 위해 제조업 부문의 사업체 단위 패널데이터를 이용하여 제조업 내 업종별·고용규모별 최저임금 영향률을 추정하고 이를 기업의 생산성과 연계함으로써 최저임금 변화가 생산성에 미치는 영향을 살펴보았다. 특히 생산함수 추정에서 기존 연구의 문제점인 요소투입의 내생성을 보정함으로써 자본계수 과소추정 및 노동계수 과대추정의 문제를 보완하였다. 분석 결과, 최저임금 인상이 임금, 고용, 생산성에 미치는 영향은 업종별·고용규모별로 다르게 나타났다. 특히, 최저임금 인상은 제조업 전반의 생산성 제고에 긍정적인 것으로 추정되었지만 생산성 변화의 방향과 폭은 업종별로 상이했다. 최저임금 인상이 고용규모별 생산성에 미친 영향을 보면 전반적으로 고용규모가 작을수록 생산성에 부정적이지만 업종에 따라서는 긍정적인 효과가 있는 것으로 분석되었다. 또한 최저임금 인상으로 유발된 임금 상승은 제조업 내 모든 업종에 걸쳐 생산성을 증가시키는 것으로 나타났다. 본 연구의 정책적 시사점은 다음과 같다. 최저임금 인상으로 상당수 업종에서 생산성이 개선되는 것으로 추정된 만큼, 이를 최저 임금 상승이 초래하는 노동비용 증가 및 고용 감소 효과와 함께 종합적으로 평가하는 게 바람직하다. 아울러 동일한 최저임금 적용에도 불구하고 최저임금영향률의 차이로 인해 최저임금이 고용, 임금, 생산성에 미치는 영향은 업종·규모에 따라 상이할 수 있음에 유념할 필요가 있다.

K 대학교 치위생학과 학생의 해외임상실습참여가 임상실습만족도, 전공만족도 및 해외취업의사에 미치는 영향 (Effect of K University Dental Hygiene Department students' participation in overseas clinical practice on satisfaction with practice, major, and intention to work abroad)

  • 이민선;최마이
    • 대한치위생과학회지
    • /
    • 제6권2호
    • /
    • pp.151-160
    • /
    • 2023
  • 연구배경: 강원도 K 대학교 치위생학과 학생의 해외임상실습참여에 따른 임상실습만족도 및 전공만족도, 해외취업의사의 차이를 분석하고자 시행하였다. 연구방법: 치위생학과 3,4학년 편의추출하여 총 215명에게 설문조사를 실시하였으며, 불성실 응답 1부를 제외하고 최종 214부를 분석하였다. 일반적인 특성은 성별, 학년, 치과 아르바이트 경험, 부모님 합산 월소득, 해외여행 경험, 토익 응시 여부, 학교 성적을 조사하였다. 학과 만족도와 학교 성적은 5점 Likert 척도로 측정하였다. 임상실습 관련 만족도는 임상실습 만족도, 해외실습 참여 의향, 해외취업 관심도를 조사하였다. 임상실습 만족도, 해외실습 참여도, 해외취업 관심도는 '만족(참여)한다', '보통이다', '만족(참여)하지 않는다'로 재구분하여 분석하였다. 연구결과: 해외임상실습에 참여자의 임상실습 만족도는 5점 만점의 4.00±1.00, 미참여자는 3.75±1.02, 전공만족도는 참여자 3.57±0.93, 미참여자 3.48±0.80로 차이가 있었으나 통계적으로 유의한 차이가 없었다(p=.239, z=-1.177)(p=.570, z=-.568) 추후 해외로의 임상실습 참여 에 대하여 해외실습 참여자는 66.7%가 참여 의향이 있고, 원하지 않는 참여자는 없었으며 미참여자 40.9%는 참여의향이 없었으며 유의한 차이가 있었다(p<0.05). 해외 취업에 대하여 참여자는 76.2%, 미참여자는 19.2%가 관심을 가지고 있으며 유의한 차이가 있었다(p<0.05). 결론: 학생들의 해외실습 참여를 통해 실습 및 전공 만족도가 높아졌으며, 향후 해외실습 및 해외인턴십 프로그램 참여에 대한 긍정적인 의향을 갖고 있음을 확인하였다.

과학(科學)과 과학교육(科學敎育)에 대한 중등과학교사(中等科學敎師)의 태도(態度) 조사연구(調査硏究) (A Survey on Attitudes Toward Science and Science Teaching Among the Secondary School Science Teachers)

  • 박승재;이희성
    • 한국과학교육학회지
    • /
    • 제4권1호
    • /
    • pp.1-14
    • /
    • 1984
  • The student's attitude toward science is generally influenced by their teachers. Therefore, teachers' positive attitudes toward science and science teaching play an important role to change the student's attitude toward science. The purpose of this survey is to investigate the status on attitudes toward science and science teaching among the secondary school science teachers in Korea. The attitudes were surveyed by the questionnaire which was developed by Sung-Jae Pak. The instrument is designed to use Likert type scale and is composed of two kinds of scale: one is the attitudes toward science scale (the AT scale) and the other is the attitudes toward science teaching scale (the AT Kale), which contains 24 questions respectively. Each of them has 6 sub-level areas. The six areas of attitude toward science are as follow: The goals and values, process and method of science, knowledge and the view of nature, social and cultural aspects, scientist and a career in science, the preferences and willingness. The six areas of attitude toward science teaching are as follow: The goals and values, process and method of science teaching, the content and structure, social and cultural aspects, science educator and a career in science teaching, satisfaction and willingness. From 152 teachers' responses, the tendency of total as well as each area and the contrast of their backgrounds at the level of 5% significance were analyzed by SPSS computer program. Some results and conclusion of the study are as follow: 1. The overall attitude of the measured secondary school science teachers shows a positive trend tendency. Also total positive attitude toward science teaching are slightly higher than that of science, which support the fact that the teachers are not scientists but they are directly involved in teaching of science. 2. The attitudes toward science are moderately correlated to the attitudes toward science teaching (r=0.52). 3. The areas of knowledge, nature-view and tile area of social aspects of science show a very negative tendency. Also the two areas are not correlated to some other areal at the level at 5% significance. 4. Female science teachers exhibit just a little more positive attitudes than those of male teachers in science teaching. 5. The science teachers who wanted to have a profession of scholar or educator exhibit a little more positive attitudes than others in science and total attitudes (AS+AT). 6. The more the science teachers have "intellectual delights" the more their attitudes toward science and science teaching are positive. 7. At the level of 5% significance, there are differences which college they graduated from, but there are no differences in multiple comparison at 10% level. 8. The differences in their background dose not appear in such as age; teaching career; academic career; deny the superstition; their onlook for the scientist or educator when they were freshmen; major the basic science; opinions about the U.F.O. and the origin of life. 9. The responses of certain individual statement are quite different from the overall tendencies, which strongly suggest the de1ailed analysis and deeper study. For the continuing study, it is recommendable to revile the measuring tools with the theoretical study for the better validity and reliability, and investigate the status of the attitudes toward science and science teaching among the science teachers with sufficient samples.

  • PDF

과숙김치의 생물.화학적 특성 (Characterization of Biological Chemistry from Over Ripened Kimchi)

  • 문영자;백경아;성창근
    • 한국식품영양학회지
    • /
    • 제14권6호
    • /
    • pp.512-520
    • /
    • 2001
  • 한국의 대표적인 전통식품 중 하나인 김치의 발효시 문제가 되고 있는 저장성과 미생물의 과도 성장으로 인한 부패를 지연시키기 위한 방법을 모색하고자 과숙김치의 pH와 산도, 유기산, 효소활성 등의 이화학적 특성과 미생물학적 특성을 살펴 본 결과는 다음과 같다. 1. 김치의 발효초기단계에 pH는 급격히 감소하다가 산도가 0.5% 부근일 때부터 완만한 감소를 보였고 반면에 산도는 초기에는 완만히 증가하다가 pH가 4부근일 때부터 발효미생물의 영향으로 급격한 증가를 보였다. 2. 김치의 숙성과정시 생성되는 유기산은 oxalic acid, lactic acid, acetic acid, malic acid, succinic acid 등 이며, GC-MSD로 확인 작업을 하였다. 유기산들 중 lactic acid가 발효기간 중 가장 큰 변화를 보였으며, malic acid는 저장기간이 경과함에 따라 감소하였다. 3. 과숙김치에서 산도가 0.75%인 kimchi A의 acidic protease activity, lipase activity가 가장 높았고, Amylase activity는 산도 0.95%인 kimchi C가 가장 높았다. 4. 5가지 과숙김치 각각(A, B, C, D, E순으로)의 총균에서는 8.1$\times$$10^{5}$ , 4.7$\times$$10^4$, 1.2$\times$$10^3$, 3.2$\times$$10^4$, 4.9$\times$$10^{5}$ (CFU/ml)를 나타내었다. 유산균수는 1.0$\times$$10^{5}$ , 1.3$\times$10s, 1.2$\times$$10^3$, 2.3$\times$ $10^3$, 2.1$\times$$10^4$(CFU/ml)이 었다. 또한, 초산균수는 1.8$\times$$10^{5}$ , 9.3$\times$$10^4$, 7.0$\times$$10^1$, 4.5$\times$$10^4$, 5.3$\times$$10^3$(CFU/ml)으로 계수되었다.

  • PDF

Stellite bearings for liquid Zn-/Al-Systems with advanced chemical and physical properties by Mechanical Alloying and Standard-PM-Route

  • Zoz, H.;Benz, H.U.;Huettebraeucker, K.;Furken, L.;Ren, H.;Reichardt, R.
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
    • /
    • pp.9-10
    • /
    • 2000
  • An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

  • PDF

종격동 종양의 전산화 단층촬영(CT)소견, 수술소견 및 병리조직학적 침윤도 사이의 상관성 분석 (Analysis of Relativity Between Invasiveness on Chest of Tomographic Finding and Histopathologic Invasiveness)

  • 김용희;이현우
    • Journal of Chest Surgery
    • /
    • 제30권8호
    • /
    • pp.780-785
    • /
    • 1997
  • 종격동 종양은 그 발생 위치가 심장과 대혈관, 식도, 그리고 신경조직 등과 같이 인체에 중요한 조직과 인접해 있는 점과 수술적 치료가 비교적 용이하고 그 결과 또한 우수하여 흉부외과 영역에서 매우 흥미있는 질환으로 관심을 끌어 왔다. 저자는 울산의대 서울중앙병원 흉부외과에서 1990년 1월부터 1995년 6월까지 5년 6개월간 수술적 치료를 받은 원발성 종격동 종양 87명을 대상으로 연령과 성별, 진단방법, 임상적 징후 및 증상, 크기, 해부학적 위 치, 수술소견, 병리조직학적 진단에 대하여 관찰하고 전산화 단층촬영(U)소견과 병리조직학적으로 침윤성 을 보였던 종격동 종양에서의 임상적 의의를 분석하여 종격동 종양에 대한 적절한 외과적 치료지침을 얻고자 하였다. 종양의 발생 부위는 전상부 종격동이 50명(57%)으로 가장 많았으며 후부 종격동 30명(35%), 중부 종격동 7 명(8%)순이었다. 병리조직학적 분류로 보면 흉부종 27명(31%), 원발성 낭종 19명(22%), 신경성 종양 19명 (22%), 기형종 10명(10%)순이었다. 병리조직학적으로 침윤성을 보인 경우는 17명(20%)이었으며 전상부 종격 동에 14명(16%), 후부 종격동에 3명(4%)이었다. 종격동 종양 \ulcorner대한 전산화 단층촬영은 87명 모두 시행하였으며, 주위 조직에 침윤성을 보인 경우는 15명(17%)이었다. 종양의 외과적 치료로 완전 절제 80명(92%), 부분 절제 6명(7%), 개흉후 조직검사 1명(2%)을 시행하였다 수술 소견상 14명(16%)에서 주위 조직의 침윤이 의심 되었다. 종양의 크기는 전체 평균 6.0$\pm$3.2 cm 전상부 종격동 종양 6.2$\pm$3.1 cm 중부 종격동 종양 3.9$\pm$ 1.1 cm 후부 종격동 종양 5.8그2.6 cm등이었다. 양성 종양의 크기는 평균 5.5$\pm$2.6 cm 악성종양의 크기는 7.3$\pm$ 4.6 cm이었다. 수술소견상 침윤이 의심된 경우들의 평균 크기는 7.2$\pm$3.8 cm이었고, 소견상 침윤이 의심 된 경우들의 평균 크기는 8.0$\pm$3.8 cm이었다. 병리조직학적으로 침윤성을 보였덜 17명과 CT소견상 침윤성을 보였던 15명과의 상관성은 민감도 (sensitivity) 35%, 특이도(specificity) 87%, 예측도(predictability) 35%이며, 수술소견상 침윤성을 보였던 14명과 의 상관성은 민감도 53%,특이도 93%, 예측도 64%이었다. 또한 종양의 크기와 악성도와의 상관관계에서 크기가 클수록 악성일 가능성이 증가하는 통계적으로 의의 있는 유의성이 있었다. 결론적으로 종격동 종양에 대한 수 珦\ulcorner진단으로 또는 수술시 예측할 수 있는 침윤성은 낭성 종양을 제외 한 경우 병리조직학적 진단과의 일치성이 낮아 종격동 종양의 수술적 치료는 종양을 포함하여 가능한 범위까지 광범위하게 절제하는 것이 수술 결과를 좋게 하는 방법이라고 사료된다.

  • PDF

Detection of Campylobacter jejuni in food and poultry visors using immunomagnetic separation and microtitre hybridization

  • Simard, Ronald-E.
    • 한국어업기술학회:학술대회논문집
    • /
    • 한국어업기술학회 2000년도 춘계수산관련학회 공동학술대회발표요지집
    • /
    • pp.71-73
    • /
    • 2000
  • Campylobacter jejuni is most frequently identified cause of cause of acute diarrhoeal infections in developeed countries, exceeding rates of illness caused by both salmonella and shigilla(Skirrow, 1990 ; Lior 1994). Previous studies on campylobacter jejuni contamination of commercial broiler carcasses in u.s.(Stern, 1992). Most cases of the disease result from indirect transmission of Campylobactor from animals via milk, water and meat. In addition to Campylobactor jejuni. the closely relates species Campylobactor coli and Campylobactor lari have also been implicated as agents of gastroenteritis in humans. Campylobactor coli represented only approximately 3% of the Campylobactor isolates from patients with Campylobactor enteritis(Griffiths and Park, 1990) whereas Campylobactor coli is mainly isolated from pork(Lmmerding et al., 1988). Campylobactor jejuni has also been isolated from cases of bacteremia, appendicitis and, recently, has been associated with Guillai-Barre syndrome(Allos and Blaser, 1994; von Wulffen et al., 1994; Phillips, 1995). Studies in volunteers indicated that the infectious dose for Campylobactor jejuni is low(about 500 organisms)(Robinson, 1981). The methods traditionally used to detect Campylobactor ssp. in food require at least two days of incubation in an enrichment broth followed by plating and two days of incubation on complex culture media containing many antibiotics(Goossens and Butzler, 1992). Finnaly, several biochemical tests must be done to confirm the indentification at the species level. Therfore, sensitive and specific methods for the detection of small numbers of Campylobactor cells in food are needed. Polymerase chain reaction(PCR) assays targeting specific DNA sequences have been developed for the detection of Campylobactor(Giesendorf and Quint, 1995; Hemandex et al., 1995; Winter and Slavidk, 1995). In most cases, a short enrichment step is needed to enhance the sensitivity of the assay prior to detection by PCR as the number of bacteria in the food products is low in comparison with those found in dinical samples, and because the complex composition of food matrices can hinder the PCR and lower its sensitivity. However, these PCR systems are technically demanding to carry out and cumbersome when processing a large number of samples simutaneously. In this paper, an immunomagnetic method to concentrate Campylobactor cells present in food or clinical samples after an enrichment step is described. To detect specifically the thermophilic Campylobactor. a monoclonal antibody was adsorbed on the surface of the magnetic beads which react against a major porin of 45kDa present on the surface of the cells(Huyer et al., 1986). After this partial purification and concentration step, detection of bound cells was achieved using a simple, inexpensive microtitre plate-based hybridization system. We examined two alternative detection systems, one specific for thermophilic Campylobactor based on the detection of 23S rRNA using an immobilized DNA probe. The second system is less specific but more sensitive because of the high copy number of the rRNA present in bacterial cell($10^3-10^4$). By using specific immunomagnetic beads against thermophilic Campylobactor, it was possible to concentrate these cells from a heterogeneous media and obtain highly specific hybridization reactions with good sensitivity. There are several advantages in using microtitre plates instead of filter membranes or other matrices for hybridization techniques. Microtitre plates are much easier to handle than filter membranes during the adsorption, washing, hybridization and detection steps, and their use faciilitates the simultanuous analysis of multiple sample. Here we report on the use of a very simple detection procedure based on a monoclonal anti-RNA-DNA hybrid antibody(Fliss et al., 1999) for detection of the RNA-DNA hybrids formed in the wells.

  • PDF