• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.2
• /
• pp.73-78
• /
• 2012

Recently, the laser processing method has used as micro-machining technologies in industries of aerospace, electronics and automotive. The laser processing newly focused could be alternative to existing machining method. However, there are few practical results of research about the proper setting of the laser machining conditions and the laser machining characteristics for mechanical materials. The purposes of this study was to choose optimum machining conditions and to estimate the laser machining characteristics using taguchi experimental method for various mechanical materials that is S45C, Stainless steel, Aluminum, Copper, Titanium and Tungsten carbide. From obtained results, it was confirmed that optimum machining conditions could be found and laser machinability depends on thermal conductivity and hardness of workpiece.

• Journal of the Korean Ceramic Society
• /
• v.40 no.9
• /
• pp.867-873
• /
• 2003

$Si_{3}N_{4}$-BN based machinable ceramics were fabricated by hot-pressing at $1800^{\circ}C$ for 2 h under a pressure of 25 MPa. The microstructure, mechanical properties, and machinability were investigated. With increasing h-BN content from 5 vol% to 30 vol%, three point flexural strength decreased from 1000 MPa of monolithic S $i_3$ $N_4$ to 720～400 MPa. The fracture toughness, $K_{IC}$ , was decreased from 7.6 MPaㆍ$m^{1/2}$ of monolithic S $i_3$ $N_4$ to 6.5～4.1 MPaㆍ$m^{1/2}$. The grain size and aspect ratio of $\beta$-S $i_3$ $N_4$ slightly decreased with increasing h-BN content. S $i_3$ $N_4$ monolith could not be machined due to brittle fracture, but S $i_3$ $N_4$-BN based machinable ceramics could be machined without fracture, showing excellent machinability. With increasing h-BN content, the thurst force during cutting and micro-drilling process was decreased.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.11
• /
• pp.91-96
• /
• 1992

The technology of LOCOS(LOCal Oxidation of Silicon) was used to form the island of SOI film. After this, the SOI film was recrystallized by CO$_2$ laser and metal gate nMOSFETs were fabricated on this SOI film and their electrical characteristics were measured. The kink effect was not nearly observed and edge channel effect was found in the SOI nMOSFETs. The threshold voltage was about 0.5V, the electron mobility was about 340cm$^2$V$\cdot$S and an ON/OFF ratio above 10$^{5}$ was obtained at V_{DS}$=4V. The electrical characteristics were improved by laser recrystallization.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1499-1500
• /
• 2011

In this paper, we investigated the electrical properties change of 6,13-bis(triisopropyl-silylethynyl) pentacene (TIPS-pentacene) depending on polymer blend. We fabricated organic thin film transistor (OTFT) using blending solution of small molecule and polymer. In this study poly(2-methoxy-5-(2-ethyl-hexyloxy)-1,4-phenylene-vinylene) (MEH-PPV), poly (9-vinylcarbazole) (PVK), poly [N,N'-bis(4-butylphenyl)-N,N'-bis(phenyl)benzidine] (poly-TPD), poly(${\alpha}$-methyl styrene), Poly(methyl methacrylate) (PMMA) are used as a polymer. Fabricated OTFT with blending solution of TIPS-pentacene and PVK shows best performance in this experiment. OTFT fabricated by blending solution of TIPS-pentacene and PVK shows field effect mobility of 0.0189 $cm^2/V{\cdot}s$, on/off ratio of 1.9E-5 and threshold voltage of 7.4 V.

• Phonetics and Speech Sciences
• /
• v.1 no.3
• /
• pp.109-115
• /
• 2009

Many isolated word recognition systems may generate non-similar words for recognition candidates because they use only acoustic information. In this paper, we investigate several techniques which can exclude non-similar words from N-best candidate words by applying Levenstein distance measure. At first, word distance method based on phone and syllable distances are considered. These methods use just Levenstein distance on phones or double Levenstein distance algorithm on syllables of candidates. Next, word similarity approaches are presented that they use characters' position information of word candidates. Each character's position is labeled to inserted, deleted, and correct position after alignment between source and target string. The word similarities are obtained from characters' positional probabilities which mean the frequency ratio of the same characters' observations on the position. From experimental results, we can find that the proposed methods are effective for removing non-similar words without loss of system performance from the N-best recognition candidates of the systems.

• Korean Journal of Materials Research
• /
• v.9 no.12
• /
• pp.1229-1233
• /
• 1999

In this research, We fabricated Langmuir-Blodgett(LB) ultra-thin films with (N-docosyl quinolinium)- TCNQ(1:2) complex. The characteristics ${\pi}$-A isotherms were studied to find optimum conditions of deposition by varing temperature of subphase, compression speed of barrier and amount of spreading solution. Film formation was verified by measuring transfer ratio, maximum absorption of UV-vis spectra, capacitance and ellipsometry. From the results, it was concluded that the LB film formed well with molecular oder was fabricated.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.3
• /
• pp.428-451
• /
• 2010

Traffic matrix-based anomaly detection and DDoS attacks detection in networks are research focus in the network security and traffic measurement community. In this paper, firstly, a new type of unidirectional flow called IF flow is proposed. Merits and features of IF flows are analyzed in detail and then two efficient methods are introduced in our DDoS attacks detection and evaluation scheme. The first method uses residual variance ratio to detect DDoS attacks after Recursive Least Square (RLS) filter is applied to predict IF flows. The second method uses generalized likelihood ratio (GLR) statistical test to detect DDoS attacks after a Kalman filter is applied to estimate IF flows. Based on the two complementary methods, an evaluation formula is proposed to assess the seriousness of current DDoS attacks on router ports. Furthermore, the sensitivity of three types of traffic (IF flow, input link and output link) to DDoS attacks is analyzed and compared. Experiments show that IF flow has more power to expose anomaly than the other two types of traffic. Finally, two proposed methods are compared in terms of detection rate, processing speed, etc., and also compared in detail with Principal Component Analysis (PCA) and Cumulative Sum (CUSUM) methods. The results demonstrate that adaptive filter methods have higher detection rate, lower false alarm rate and smaller detection lag time.

• The Korean Journal of Pharmacology
• /
• v.31 no.3
• /
• pp.271-278
• /
• 1995

The relative distribution ratio of barbiturates between hyarocarbon interior and surface region of outer monolayer of synaptosomal plasma membrane vesicles (RSPMV) isolated from rat whole brain was determined by employing the fluorescent probe technique. The two fluorescent probes N- octadecylnaphthyl-2-amine-6-sulfonic acid (ONS) and 12-(9-anthroyloxy) stearic acid (AS) were utilized as probes for hydrocarbon interior and surface of outer monolayer of RSPMV. respectively. The Stern-Volmer equation for fluorescent quenching was modified to calculate the relative distribution ratio. The analysis of preferential quenching of these probes by barbiturates indicates that pentobarbital, hexobarbital, amobarbital and phenobarbital are predominantly distributed on the surface region. whereas thiopental sodium has an accessibility to the hydrocarbon interior of the outer monolayer of the RSPMV. From these results, it is strongly suggested that the more effective penetration into the hydrocarbon interior of the outer monolayer of the membrane lipid bilayer could result in higher general anesthetic activity.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.4
• /
• pp.456-464
• /
• 2016

The purpose of this study was to compare the quantitative and qualitative assessment of dietary intake between patients with metabolic syndrome (MetS) and healthy subjects and to investigate dietary factors related to MetS. Anthropometric measurements, blood analysis, and dietary intake as assessed by 24-hour recall were conducted in MetS patients (n=15) and healthy subjects (n=25). In order to assess the quantity and quality of dietary intake, daily nutrient intake, nutrient density, nutrient intake to dietary reference intake (DRI), nutrient adequacy ratio (NAR), food intake, dietary diversity score (DDS), and dietary variety score (DVS) were analyzed. The statistical differences between MetS patients and controls were analyzed using the SAS software program. Daily energy intake and food intake were not significantly different between the two groups (2,154.3 kcal vs. 1,872.9 kcal; 1,280.0 g vs. 1,261.6 g). There were also no significant differences in daily nutrient intake, nutrient intake ratio to DRI, NAR, or DVS between the MetS group and the control group. However, daily intake of eggs and milk in MetS patients was significantly lower than in the control group (9.0 g/day vs. 30.3 g/day, p<0.05; 0 g/day vs. 49.7 g/day, p<0.05). These results indicate that low intake of eggs and dairy products may be related to the development of MetS.

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.1
• /
• pp.7-10
• /
• 2003

Single phase CuInS$_2$ thin film with the strongest diffraction peak (112) at diffraction angle (2$\theta$) of 27.7$^{\circ}$ and the second strongest diffraction peak (220) at diffraction angle (2$\theta$) of 46.25$^{\circ}$was well made with chalcopyrite structure at substrate temperature of 70$^{\circ}C$. annealing temperature of 250$^{\circ}C$, annealing time of 60 min. The CuInS$_2$ thin film had the greatest grain size of 1.2 Um when the Cu/In composition ratio of 1.03, where the lattice constant of a and c were 5.60${\AA}$ and 11.12${\AA}$, respectively. The Cu/In stoichiometry of the single-phase CuInS$_2$thin films was from 0.84 to 1.3. The film was p-type when tile Cu/In ratio was above 0.99 and was n-type when the Cu/In was below 0.95. The fundamental absorption wavelength, absorption coefficient and optical band gap of p-type CuInS$_2$ thin film with Cu/In=1.3 were 837nm, 3.OH 104 cm-1 and 1.48 eV, respectively. The fundamental absorption wavelength absorption coefficient and optical energy band gap of n-type CuInS$_2$ thin film with Cu/In=0.84 were 821 nm, 6.0${\times}$10$^4$cm$\^$-1/ and 1.51 eV, respectively.