• Bulletin of the Society of Naval Architects of Korea
• /
• v.12 no.2
• /
• pp.43-58
• /
• 1975

There are many reports on fatigue crack of metallic materials but most of them relate crack propagation rate to stress intensity factor. The problem of crack propagation is not yet clarified, especially the bridge between micro and macro phenomena In this experiment rotating bending fatigue tests have been carried out with smoothed specimen of rolled steel plates including 0.2% carbon under application of three stress conditions to investigate the slip band and the crack propagation behaviour. The results obtained are as follows; 1) The length of cracks which have grown at initial crack tips can be expressed as follows; $l=Ae^{BNr}$(A,B: constant, $N_r$: cycle ratio) $\frac{dl}{dN}=\frac{AB}{N_f}{\cdot}e^{BNr}$($N_f$:fatigue life) 2) The ratio of slipped grain number to total grain number is $S_f=7{\sigma}-5.6$-5.6{\sigma}_c$($\sigma$: stress amplitude) (${\sigma}_c$: fatigue limit) 3) When the fatigue process transfers from Stage I to Stage II, the crack which propagates into specimen changes its direction from that of the maximum shear stress to the direction of perpendicular to principal stress and this is same in the circumferential direction of specimen. the crack propagation behaviors of both sides of a crack are different each other when they approach to the grain boundary.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.11
• /
• pp.1198-1207
• /
• 2003

The purpose of this study was to develop customized necktie design according to Korean adult male's body characteristics. For this purpose, experimentations of visual sensory evaluation on visual stimuli which show a man's wearing various neckties were carried out. The subjects were students(n=130) majoring in fashion and design related area and experts(n=6). The data were analyzed by ANOVA, duncan test, pearson's correlation coefficient, cross tabulation using spss pc/sup +/ program. Also statistic of Korea adult men's body measurements(1997) were analyzed and used to decide appropriate necktie length according to the customer's various height. The results were as follows: First, there were significant difference in visual sensibility on the stimuli showing 1) relative location of belt and necktie, 2) neckties with various length using golden ratio to the experimental model's height. Therefore, the need of producing neckties with different length according to customer's various height were verified. Second, neckties with three different length(140cm, 145cm, 151cm) were suggested for the groups of 160cm-height, 170cm-height, 180cm-height according to Korean adult male's body characteristics and aspect of production.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.2
• /
• pp.63-70
• /
• 2006

The purpose of this study was to develop the stability index of landfill sites to assess it's degree of stability. In order to develop the stability index, field data including leachate qualities, Landfill gas (LFG) composition and element composition of wastes from 50 closed landfills were collected. Three parameters-BOD/CODcr among leachate quality parameters, $CH_4$ among landfill gases, and C/N ratio from wastes-were found to be the best parameters for measuring the stability of landfill sites. The trend line of these parameters were used to Also, $CH_4$ from landfill gases and C/N ratio from wastes were found to be the best parameters. The trend lines of these parameters were used to develop the stability index of landfill sites. The equation for the index was as following; $I_{LS}=S_L+S_G+S_W$ $S_L=-\{4.892+16.587{\cdot}ln[BOD/COD_{Cr]\}$ $S_G=53.872-12.782{\cdot}ln[CH_4]$ $S_W=79.382-20.013{\cdot}ln[C/N]$ (The maximum score for $S_L$, $S_G$, and $S_W$ was 33.3.) where, $I_{LS}$ : The stability index of the landfill $S_L$ : The stability score of the leachate $S_G$ : The stability score of the landfill gas $S_W$ : The stability score of the waste.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.1
• /
• pp.65-73
• /
• 2020

This study describes the evaluation results of pile length ratio and N value on the bearing capacity of drilled shafts in cohesionless soil. The bearing capacity ratio in Meyerhof's formula is affected only by the length ratio, and it is equally evaluated a sharing ratio of the end bearing capacity and the skin friction. NAVFAC's formula shows that the pile length influences both end bearing capacity and the skin friction, but pile length is also found to be a more influence factor on the end bearing capacity. Especially, it was found that the effect of pile length factor was larger than the effect of N value and pile diameter. FHWA's formula was evaluated to reflect the influence factor by skin friction more positively than other formulas at calculation the bearing capacity. It was also confirmed that the influence of the skin friction is larger when the ultimate bearing capacity is evaluated.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.7
• /
• pp.445-448
• /
• 2016

Transparent UV photodetector was achieved by using wide bandgap metal oxide materials. In order to realize transparent heterojunction UV photodetector, n-type ZnO and p-type NiO metal oxide materials were employed. High light-absorbing SnS layer was inserted into the n-ZnO and p-NiO layers. High-performing UV photodetector was realized by ZnO/SnS/NiO/ITO structures to provide extremely fast response times (Fall time: $7{\mu}s$ and rise time: $13{\mu}s$) and high rectifying ratio. The use of functional SnS-embedded photodetector would provide a route for high functional photoelectric devices.

• Journal of the Korean GEO-environmental Society
• /
• v.25 no.6
• /
• pp.5-12
• /
• 2024

Currently, a grouting method that minimizes damage to the reservoir embankment by injecting solidification agent at low pressure is commonly used to ensure waterproofing and safety of the embankment, but the use of solidification agents can cause issues, such as a decrease in durability and a lack of clear method for determining the mixing ratio. In this study, when the base ground and solidification agent were stirred and mixed at various weight mixing ratios, the permeability coefficient and strength of the mixture were confirmed through laboratory tests, and the optimal mixing ratio was suggested through analysis of the test results. The specimen for the laboratory test was produced considering the mixing ratio of the solidification agent. The specimen for the permeability coefficient test was tested by producing one each of cohesionless and cohesive soil for a mixing amount of 1.5 kN/m³ of solidification agent, and the permeability test results confirmed that the water barrier performance was secured below the permeability coefficient value required by various design criteria. A total of 24 specimens for the strength test were produced, 3 for each of 5 mixing amounts for cohesive soil and 3 mixing amounts for cohesionless soil. The strength test results showed that the uniaxial compressive strength tends to increase linearly with increasing curing time for both cohesionless soil and cohesive soil when the mixing amount is less than 2.0 kN/m³. Therefore, the optimal mixing ratio applied to the site is determined to be mixing amount of 1.5 kN/m³ and 2.0 kN/m³. Finally, numerical analysis reflecting test results was conducted on design case for improvement projects for aging reservoirs embankment to verify the water barrier performance and safety improvement effects.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.600-606
• /
• 2018

The influence of acidity in MTT zeolite of different Si/Al molar ratio's on the catalyst activity in methanol-to-olefin (MTO) reaction has been investigated. The Si/Al ratio was controlled with the Al content in the gel when N,N,N',N'-tetramethyl-1,3-diaminopropane was used as a structure directing agent (SDA). The gel composition was controlled to $20SiO_2$ : 30SDA : x (=0.25~1.25)$NaAlO_2$ : 2NaOH : $624H_2O$, which was subject to the hydrothermal synthesis at 433 K for 4 days. As the composition of sodium aluminate decreased, the particle size of MTT zeolite increased, and also the amount of acid sites decreased. To investigate the catalytic performance, MTO reaction was carried out at 673 K with $1.2h^{-1}$ WHSV. It was found that the H-MTT (1.00Al) catalyst with a Si/Al molar ratio of 24 maintained the methanol conversion over 90% for 900 min.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.255-260
• /
• 2003

Most of the fatigue test were achieved in fully reversed condition that mean stress is zero. But, generally, mean stress can not be zero. This research was achieved the bending fatigue test that changes mean stress to spring steel and was studied relation with the mean stress and the fatigue life. The method to search effect about mean stress was extended S-N graph in two cases. One method was extended S-N graph using modified Miner's rule with considering damage. Another was extended using tendency of S-N graph. The exponential value(${\alpha}$) of mean stress-alternating stress equation is converged between the Goodman's and the Gerber's value even if fatigue life increases.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.5 no.1
• /
• pp.37-43
• /
• 1969

A genetrc study was made on plant height of indica rices with a few segregating F2 populations involving three semi-dwarf varieties such as T(N)I, CP231-SLO17, and B569A12. These populations were grown in breeding nursery at the International Rice Research Institute (IRRI) during several seasons. 20 to 25 day old seedlings grown at upland seedbed were transplanted to the paddy in a single plant hill spacing 30 cm ${\times}$ 25cm. Measurements of plant height were made from the juncture between culm and roots to the tip of the longest panicle of a plant pulled out from the paddy when they are matured. The results are summarized as follows: 1. Tall indica varieties originated from the south-east Asian countries could be classified into two groups depending upon their allelism whether they showed monogenic segregating ratio of 3:1 or not when they were crossed to T(N)1. 2. Most of U.S. varieties, especially semi-dwarf breedirg materials such as CP231 ${\times}$ SIO17 and B569A12, did not show monogenic segregating mode of 3:1 ratio when they were crossed to T(N)1 or to other varieties bearing the same genetic allele of T(N)1 such as Peta and Sigadis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.789-794
• /
• 2011

A coaxial-cable impedance transformer used in wideband frequency range is generally restricted to the fixed impedance transformation ratio as n2:1 or 1:n2(n: the number of coaxial cables). In this paper, we propose a new coaxial-cable impedance transformer to have an arbitrary impedance transformation ratio. We have fabricated three impedance transformers($50-{\Omega}$ to $25-{\Omega}$, $50-{\Omega}$ to $20-{\Omega}$ and $50-{\Omega}$ to $9-{\Omega}$) to confirm the operation characteristic of the suggested impedance transformer. The reflection characteristics (S11) of the fabricated $50-{\Omega}$ to $25-{\Omega}$ and $50-{\Omega}$ to $20-{\Omega}$ impedance transformer were less than -15dB over about 3-octaves frequency range and the reflection characteristic (S11) of the fabricated $50-{\Omega}$ to $9-{\Omega}$ impedance transformer was less than -15dB over about 1-octave frequency range, respectively.