• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.7
• /
• pp.84-89
• /
• 2014

Not only the emission regulation of on-road vehicle engine, but also emission regulation of off-road engine have been reinforced. It is the reason of wide application of emission reduction technology for off-road engines. In this study, optimization of engine parameters (Injector hole number, Injection timing and EGR rate) for reduction of NOx and smoke emissions were conducted by using the analysis of sensitivity and S/N ratio of Taguchi method(DOE). As results, this paper shows optimum value of the parameters for NOx and smoke emission reduction. From the result of reproducibility verification, it is final that the prediction value of NOx and smoke has the error of below 10%. Consequently, the method and results of this study will be used for quantitative reference to EGR control mapping in next study.

• Proceedings of the KWS Conference
• /
• 2003.11a
• /
• pp.169-171
• /
• 2003

In this paper, the prediction for the optimized bead geometry such as bead width, height, penetration and bead area in the Gas Metal Arc (GMA) welding with Taguchi method is presented. An orthogonal array, and the Signal-to-Noise (S/N) ratio employed to investigate the welding quality characteristics together in the selection of process parameters in the GMA welding process, to analyze the effect of each process parameter on the bead geometry and to finally determine the process parameters with the optimal bead geometry. Experimental results fi-om this research show that the Taguchi method provides an effective tool to enhance the accuracy of the optimized bead geometry.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.3
• /
• pp.119-129
• /
• 2012

In the medical field, the hardening of tissues is one of important informations used in diagnosis or understanding progress of disease, a quantitative measuring method of hardening is important for objective diagnosis. It has been proposed MRE(Magnetic Resonance Elastography) method that measures an index of hardening, viscoelastic properties in a noninvasive. Because the S/N ratio of MRE images go down when measuring viscoelastic properties from local wavelength and local damping factor of a propagating wave in MRE method, methods using multiple phase MRE images have been examined to decrease the effect of noise. We propose a method measuring viscoelastic properties after Fitting a function for multiple phase MRE images in this research. This proposed method has a advantage to set up arbitrarily the variation rate of a space direction of viscoelastic properties or the spatial resolution of measuring values according to changing of the noise included in images, though it applies viscoelastic wave for multiple phase MRE images. We confirmed the effectiveness of a proposed method by experiment using simulation images and experiment using silicone-gel phantom.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.4
• /
• pp.113-124
• /
• 2000

First, in order to improve selecting method of quality characteristic level desired by customers, S/N(Signal-to-Noise) ratio of Taguchi in larger-the-better characteristics was applied. Second, the Matrix classification standard of ACE(Attribute Categorization Evaluation) is presented using KANO model on difference analysis of importance and satisfaction through questionnaire from customers. This is for reflecting the diverse EC which customers want in EC quality sufficiently. Also, establishing sales point will be helpful in business strategy through presenting types that are able to decide planning quality. Third, the important measure of EC about correlation among quality characteristics and a new weight of EC are calculated depending on importance of EC and the weight of customer attribute and materials of relationship matrix through correlation matrix analysis.

• Journal of Biomedical Engineering Research
• /
• v.7 no.2
• /
• pp.117-118
• /
• 1986

It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.557-560
• /
• 1998

In this paper, we presetn the WWW (world-wide-web) base dtelePACS, which uses the communication network as asymmetric satellite data communication system (ASDCS). Web-based telePACS is imple-mented with JAVA language. Through the internet, web-based TelePACS can make it possible for remote hospital or doctor to access PACS data and information easily and cheaply. The ASDCS uses receive-only satellite links for data delivery and PSTN (Public switched telephone Network) modem or N-ISDN (narrow band integrate services digital network) for communication. The satellite communication linking shows the very high-seed performance such as 10-30 times faster than the modem linking.To solve the speed limits of internet, JPEG and wavelet compression methods were adapted in WWW-based TelePACS and were evaluated by PSNR (peak signal-to-noise ratio) and by radiological experts that 10:1 or less JPEG and wavelet compression may be acceptable for diagnostic purposes. Consequently, we get the conslusion that our system is suitable for tele-radiology and telemedicine world widely.

• Tribology and Lubricants
• /
• v.18 no.2
• /
• pp.127-132
• /
• 2002

The Taguchi method, a robust experimental design, was used to optimize manufacturing parameters of a brake lining during hot pressing and heat treatment. A friction material containing 15 ingredients was employed fur this experiment and friction and wear tests were carried out by using a pad-on-disk type tribotester. Sixteen brake linings with different manufacturing conditions were examined according to a parameter design. From the results of the signal-to-noise (S/N) ratio and the analysis of variance (ANOVA), the cause and effect of the manufacturing parameters on physical properties (hardness and porosity) and friction and wear characteristics of brake linings was obtained.

• Journal of Astronomy and Space Sciences
• /
• v.37 no.3
• /
• pp.157-163
• /
• 2020

High resolution spectroscopic observation of V1719 Cyg were made at 1.8 meter telescope of Bohyunsan Optical Astronomy observatory in Korea. Spectral resolving power was R=45,000, signal to noise ratio S/N>100. The abundances of 28 chemical elements from carbon to dysprosium were found with the spectrum synthesis method. The abundances of oxygen, titanium, vanadium and elements with Z>30 are overabundant by 0.2-0.9 dex with respect to the solar values. Correlations of derived abundances with condensation temperatures and second ionization potentials of these elements are discussed. The possible influence of accretion from interstellar environment is not so strong as for ρ Pup and other stars with similar temperatures. The signs of accretion are absent. The comparison of chemical composition with solar system r- & s-process abundance patterns shows the enhancement of the photosphere by s-process elements.

• Journal of Power System Engineering
• /
• v.18 no.1
• /
• pp.32-37
• /
• 2014

In this study, the optimum design process of an indoor package air-conditioner (PAC) was implemented by Taguchi method. The goal of this study is to obtain the best set condition of each control factor composing of an indoor PAC. The number of revolution of a double inlet sirocco fan installed in an indoor PAC was measured by the orthogonal array of $L_{18}(2^3{\times}3^4)$ and analysed by using the-smaller- the-better characteristic among the static characteristic analyses. As a result, the optimum condition of an indoor PAC was found as a set of when the cost of production, assembling and working conditions were considered. Moreover, the number of revolution of a double-inlet sirocco fan used for an optimum condition was reduced about 8.5% more than that of a standard condition for the target flowrate of $18.5m^3/min$.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.2 s.344
• /
• pp.56-65
• /
• 2006

In this paper, we introduce modified difference type symbol timing detection method of simple structure and show the relations between S/N ratio and timing detection performance which less influenced by multipath channel delay profile and added noise level and it show very exact GI detection performance characteristics. In the computer simulations, 4 symbol time duration of short and long training of IEEE802.11a standard OFDM frame are used for symbol synchronization timing detection. The computer simulation results show the very exact symbol timing detection performance characteristic within 1 sample error of OFDM signal regardless channel delay profile from minimn phase channels of phase rotation ${\pi}/2$ to non-minimum phase channels of phase rotation ${\pi}/2$ of received OFDM signal and added noise level in channel.