Browse > Article
http://dx.doi.org/10.9725/kstle.2002.18.2.127

Manufacturing Parameters Affecting Physical Properties and Tribological Behavior of Brake Linings  

Kim, Seong-Jin (Department of Advanced Materials Engineering, Korea University)
Kim, Kwang-Seok (Department of Advanced Materials Engineering, Korea University)
Jang, Ho (Department of Advanced Materials Engineering, Korea University)
Publication Information
Tribology and Lubricants / v.18, no.2, 2002 , pp. 127-132 More about this Journal
Abstract
The Taguchi method, a robust experimental design, was used to optimize manufacturing parameters of a brake lining during hot pressing and heat treatment. A friction material containing 15 ingredients was employed fur this experiment and friction and wear tests were carried out by using a pad-on-disk type tribotester. Sixteen brake linings with different manufacturing conditions were examined according to a parameter design. From the results of the signal-to-noise (S/N) ratio and the analysis of variance (ANOVA), the cause and effect of the manufacturing parameters on physical properties (hardness and porosity) and friction and wear characteristics of brake linings was obtained.
Keywords
taguchi method; manufacturing parameter; tribological behavior; brake lining;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Friction Coefficient Identification System for Brake Lining /
[ SAE ] / SAE (Society of Automotive Engineers) Recommended Practice, J866 MAR 85
2 Fricton and Wear of Friction Material Containing Two Different Phenolic Resins Reinforced with Aramid Pulp /
[ Kim, S. J.;Jang, H. ] / Tribology International   DOI   ScienceOn
3 /
[ Mark, H. F. ] / Encyclopedia of Polymer Science and Technology: Plastics, Resins, Rubbers, Fibers
4 /
[ Knop, A.;Scheib, W. ] / Chemistry and Application of Phenolic Resins
5 /
[ Salamone, J. C. ] / Polymeric Materials Encyclopedia
6 Friction Characteristics of Non-Asbestos (NAO) and Low-Steel Friction Material: The Comparative Study /
[ Kim, S. J.;Jang, H. ] / KSTLE International Journal   과학기술학회마을
7 The Effect of Antimony Trisulfide (<TEX>$Sb_2S_3$</TEX>) and Silicate (ZrSiO₄) in the Automotive Brake Friction Material on Friction Characteristics /
[ Jang, H.;Kim, S. J. ] / Wear   DOI   ScienceOn
8 /
[ Peace, G. S. ] / Taguchi Methods: A Hands-on Approach
9 Compositional Effects of the Brake Friction Material on Creep Groan Pheonomena /
[ Jang, H.;Lee, J. S.;Fash, J. W. ] / Wear   DOI   ScienceOn
10 Synergistic Effects of Aramid Pulp and Potassium Titanate Whiskers in the Automotive Friction Materal /
[ Kim, S. J.;Cho, M. H.;Lim, D.-S.;Jang, H. ] / Wear   DOI   ScienceOn
11 Elasticity-An Important Factor of Wet Friction Materials /
[ Ohkawa, S. ] / SAE Technical Paper 911775
12 /
[ Montgomery, D. C. ] / Design and Analysis of Experiments, Chap. 14