• Transactions of the Korean Society of Mechanical Engineers
• /
• v.4 no.3
• /
• pp.113-118
• /
• 1980

Stresses were calculated for finite-width orthotropic laminates with a circular hole and remote uniaxial loading using a two-dimensional finite-element analysis with both uniform stress and uniform displacement boundary conditions. Five different laminates were analyzed: quasi-isotropic [0.deg./.+-.45.deg./90.deg.].$\_$s/, 0.deg., 90.deg., [0.deg./90.deg.]$\_$s/, and [.+-.45.deg.]$\_$s/, Computed results are presented for selected combinations of hole diameter-sheet-width ratio d/w and length-to width ratio L/w. For small L/w values, the stress-concentration factors K$\_$tn/ were significantly different for the uniform stress and uniform displacement boundary conditions. Typically, for the uniform stress conditions, the K$\_$tn/ values were much larger than for the infinite-strip reference conditions; however, for the uniform displacement conditon, they were only slighty smaller than for this reference. The results for long strips are also presented as width-correction factor. For d/w.leg.33, these width-correction factors are nearly equal for all five laminates.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.433-436
• /
• 2002

Retardation liquid crystal films with a profiled titled optic axis (splay films) of both nematic and discotic types are used as compensation films for twisted nematic displays (TN-LCD). A new method is developed to characterize retardation vs. inclination (retardation profile) of splay films by three parameters: "full retardation" $d^{\ast}{\triangle}n$, "inplane retardation" $R_0$ and "retardation difference" $R_d$ . Splay films with the same retardation profile but with different tilt profile (retardation invariants) are discovered. Splay films with different structure parameters but belong to the same retardation invariant have the same compensation opportunities for TN-LCD.

• Korean Journal of Ecology and Environment
• /
• v.42 no.4
• /
• pp.465-475
• /
• 2009

The purpose of the study was to evaluate spatial and temporal effects of wastewater treatment plants (WWTPs) on the water quality of downstreams (Tan Stream, TS; Daemyeong Stream, DS; Gwangju Stream, GS, and Kap Stream, KS) located in four major watersheds along with impact analysis of nutrient enrichments on the WWTPs during 2004~2008. In the four streams, seasonal means of BOD, COD, TN, and TP were significantly (p<0.01) greater in the downstreams ($D_s$) than the upstreams ($U_s$). The removal effect of nutrients (nitrogen, and phosphorus) from the WWTPs was much less than the BOD, indicating a greater nutrient impact on the downstreams. Seasonal dilution of organic matter, based on BOD, during the summer monsoon of July~September was most pronounced in the downstreams of all four watersheds. However, mean TN in the downstreams during the monsoon varied little in all four streams. Regression analysis of TN in the downstreams against TN from the WWTPs showed that in the TS, and DS regression slopes in the upstreams were similar to the slopes of downstream but there was a significant difference in the GS (p<0.001) and KS (p<0.01). Tan-Stream WWTP showed low removal efficiency of BOD and COD concentrations, compared to the nutrients, whereas, two WWTPs of Gwangju and Kap Stream had low removal effects in TN and TP. Regression analysis of TN and BOD in the downstreams showed that they was closely related (p<0.01) with stream water volume only in the GS. Our data analysis suggests that greater treatment efficiencies of phosphorus and nitrogen from the WWTPs may improve the downstream water quality.

• Journal of Animal Science and Technology
• /
• v.49 no.2
• /
• pp.279-286
• /
• 2007

A submerged biofilm sequencing batch reactor (SBSBR) process, which liquor was internally circulated through sandfilter, was designed, and performances in swine wastewater treatment was evaluated under a condition of no external carbon source addition. Denitrification of NOx-N with loading rate in vertical and slope type of sandfilter was 19% and 3.8%, respectively, showing approximately 5 times difference, and so vertical type sandfilter was chosen for the combination with SBSBR. When the process was operated under 15 days HRT, 105L/hr.m3 of internal circulation rate and 54g/m3.d of NH4-N loading rate, treatment efficiencies of STOC, NH4-N and TN (as NH4-N plus NOx-N) was 75%, 97% and 85%, respectively. By conducting internal circulation through sandfilter, removal performances of TN were enhanced by 14%, and the elevation of nitrogen removal was mainly attributed to occurrence of denitrification in sandfilter. Also, approximately 57% of phosphorus was removed with the conduction of internal circulation through sandfilter, meanwhile phosphorus concentration in final effluent rather increased when the internal circulation was not performed. Therefore, It was quite sure that the continuous internal circulation of liquor through sandfilter could contribute to enhancement of biological nutrient removal. Under 60g/m3.d of NH4-N loading rate, the NH4-N level in final effluent was relatively low and constant(below 20mg/L) and over 80% of nitrogen removal was maintained in spite of loading rate increase up to 100g/m3.d. However, the treatment efficiency of nitrogen was deteriorated with further increase of loading rate. Based on this result, an optimum loading rate of nitrogen for the process would be 100g/m3.d.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.290-292
• /
• 2007

A twisted nematic type liquid crystal electro-optic modulator (TN-LC modulator) was developed. The modulator used single polarizer and the reflection on-off ratio was maximized by optimization of twist angle and retardation of liquid crystal cell. The TNLC modulator shows better sensitivity and response time than conventional liquid crystal modulator.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1125-1131
• /
• 2004

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with rubbing alignment method on the two kinds of polyimide (PI) surfaces using thin plastic substrates. The NLC pretilt angles generated on thin plastic substrates are higher than that on the glass substrate. We study that AFM (atomic force microscope) image of rubbed PI surface with polymer film has formed the micro-groove. Also, EO characteristics of the TN-LCD with a rubbed PI surface based on polymer are almost the same as that of the TN-LCD with a rubbed PI surface based on glass.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.914-917
• /
• 2002

We have obtained high performance and low voltage driving OCB panel by reducing the critical voltage and retardation matching between liquid crystal layer and compensation films. The critical voltage in the panel has been minimized by flattening color filter layer and optimizing a rubbing process. In addition, an appropriate retardation of the film and LC layer has scanned to achieve low driving voltage and high transmission. The proto-type 17" WXGA OCB panel has demonstrated with less than 5V drive and over 80 degree for all viewing direction except for rubbing direction with over 90% of TN light efficiency.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.20 no.2
• /
• pp.76-83
• /
• 2017

In order to investigate the characteristics of water quality and heavy metals in Shihwa Lake, concentration comparisons according to land use types and mass discharge through streams were carried out. Based on classification for streams according to land use types, the concentration of DO, SS, POC, $NO_3$ and Chl-a showed higher concentrations in agricultural areas than in industrial and urban areas. However, COD, DIN, DIP, TN, TP, DOC, TOC and heavy metal concentrations showed relatively high values in industrial areas. The concentrations of water qualities and heavy metals were relatively high in March to May and the concentration decreased in summer seasons (July-August). The averages of stream discharges of water qualities were 1,172 kg/d for SS, 151 kg/d for TN, 11.1 kg/d for TP and 389 kg/d for TOC, respectively. The agricultural area, Jangjunbo(S8), accounted for 47.5%(TP)~75.1%(SS) in the total stream discharges. Cu, Zn and Cd in stream waters were found to be more than 92% of the total discharges in industrial area, showing descending order of Zn>Cu>Ni>Pb>Co>Cd.

• Journal of the Korean Chemical Society
• /
• v.48 no.2
• /
• pp.123-128
• /
• 2004

Quantum chemical quantities, enthalpy of formation(${\Delta}H_f$), HOMO and LUMO energy, and dipole moment(${\mu}_D$) were acquired by AM1, PM3, and ZINDO/1 methods for polyamines and imidazole derivatives. The investigation of the inhibitory activity on some Ni(II) complexes with polyamines and imidazole derivatives is performed by ZINDO/1 calculations. It was found that experimental inhibitory activity(IA) appeared when the value of net charge and enthalpy of formation were over 0.03 and -300 eV, respectively for Ni(II) complexes. These results showed that the Ni(II) complexes have exception on the following very unstable compounds: square pyramidal [Ni(dpt)(tn)])]$^{2+}$(dpt=3,3'-diaminodipropylamine)(tn=1,3-diaminopropane) and distorted tetrahedral [Ni(N-PropIm))$_2$(NCS))$_2$](N-PropIm=N-Propylimidazole).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1049-1052
• /
• 2004

In general, contrary to the CRTs with impulsive emission, liquid crystal displays have motion artifacts such as blurring. ghost image, decrease of dynamic CR(contrast ratio), and stroboscopic motion due to hold type driving method. In this paper, to improve motion picture quality of LCDs. impulsive driving method of black data insertion was applied to the OCB mode which is well known for its fast LC response time and wide viewing angle properties. Subject evaluation was carried out with CRT, TN, SIPS(Super IPS). and impulsive driving OCB. Moving picture image quality near CRT was obtained in impulsive OCB driving mode