• The Plant Pathology Journal
• /
• 제26권1호
• /
• pp.37-48
• /
• 2010

This paper describes a web-based information system for plant disease forecast that was developed for crop growers in Gyeonggi-do, Korea. The system generates hourly or daily warnings at the spatial resolution of $240\;m{\times}240\;m$ based on weather data. The system consists of four components including weather data acquisition system, job process system, data storage system, and web service system. The spatial resolution of disease forecast is high enough to estimate daily or hourly infection risks of individual farms, so that farmers can use the forecast information practically in determining if and when fungicides are to be sprayed to control diseases. Currently, forecasting models for blast, sheath blight, and grain rot of rice, and scab and rust of pear are available for the system. As for the spatial interpolation of weather data, the interpolated temperature and relative humidity showed high accuracy as compared with the observed data at the same locations. However, the spatial interpolation of rainfall and leaf wetness events needs to be improved. For rice blast forecasting, 44.5% of infection warnings based on the observed weather data were correctly estimated when the disease forecast was made based on the interpolated weather data. The low accuracy in disease forecast based on the interpolated weather data was mainly due to the failure in estimating leaf wetness events.

• 한국해양공학회지
• /
• 제25권6호
• /
• pp.56-59
• /
• 2011

The demand for cold rolled steel (CR) for structural members is gradually increasing. If no surface treatment (coating for corrosion resistance) for CR is conducted, its use is very limited because CR is vulnerable to corrosion. Therefore, we need to develop a coating solution to provide high corrosion resistance for CR. In this study, an organic/inorganic coating solution with Si and Ti (Si polysilicate 7 wt.% + Urethane 13 wt.% + Ti amorphous 0.5 wt.%; LR-0727(1)) was used to evaluate the corrosion resistance of CR under a salt spray test. The specimens with the LR-0727(1) coating were heat treated in a drying oven at $120{\sim}210^{\circ}C$for 5 min. The corrosion resistance was investigated using a salt spray test of 7 h. In addition, an adhesive test was conducted. Rust showed under a heat treatment of $150^{\circ}C$, but no vestiges were found over $160^{\circ}C$. The specimens with heat treatment at $160^{\circ}C$ or more did not experience delamination. From these results, it is considered that the temperature limit for optimum heat treatment is $160^{\circ}C$ considering energy efficiency.

• 복합신소재구조학회 논문집
• /
• 제5권3호
• /
• pp.8-16
• /
• 2014

Torque control method and turn of nut method are specified as clamping method of high strength bolts in the steel construction specifications. Quality control of torque coefficient is essential activity because torque control method, which is presently adopted as clamping method in domestic construction sites, is affected by variation of torque coefficient. The clamping of torque shear bolt is based on KS B 2819. It was misunderstood that the tension force of the TS bolt was induced generally at the break of pin-tail specified. However, the clamping forces on slip critical connections do not often meet the intended tension, as it considerably varies due to torque coefficient dependent on the environmental factors and temperature variables despite the break of the pin tail.This study was focused to evaluate the effect of environmental factors and errors of installing bolts during tightening high strength bolts. The environmental parameters were composed of 'wet' condition, 'rust' condition, 'only exposure to air' condition. And the manufacture of trial product was planned to identify the induced force into the bolts. The algorithm for a trial product was composed of the relation between electricity energy taken from torque shear wrench and tension force from hydraulic tension meter.

• 한국콘텐츠학회논문지
• /
• 제18권2호
• /
• pp.290-300
• /
• 2018

색유리와 화장토를 이용한 새로운 기법발견의 주안점은 기존의 불편한 점을 개선해야 하기 때문인데 이는 도자기 소지와 유리의 상호물성 호환 관계에 있다. 말하자면 세로로 된 도자기 기물에는 색유리의 데코레이션 표현이 용이하나 가로로 된 기물에서는 녹아 흐르기 때문에 미적 표현이 제한을 받아왔다. 그래서 세로로 된 기물에 녹아 흐르지 않는 새로운 표현 방법의 발견이 주된 관점이다. 이를 보완한 새로운 방법은 화장토를 이용하여 색유리를 곱게 분쇄하여 희석한 후 붓으로 기벽에 칠하는 새로운 기법을 최초로 개발하였고 추가로 미적 완성도를 높이기 위해 상감기법과 귀얄기법을 적용하였다. 소성의 방법은 산화와 환원이고 소성방법에 따라 컬러가 다르게 발색 되었다. 특히 음각 된 색유리 표면을 부분부분 깎아낼 경우 독특한 붉은 갈색게열의 부드러운 그라데이션이 형성되었는데 이러한 효과를 작품 제작 뿐 아니라 산업자기에 확장 적용을 하기에도 좋을 것이다.

• 한국응용과학기술학회지
• /
• 제22권1호
• /
• pp.15-20
• /
• 2005

$Na_2CO_3$. Sodium orthosilicate (Na-OSi), Tetronix T-701 (T-701), Na-dioctyl sulfosuccinate (303C), Newpol PE-68 (PE-68), MJU-100A, and tetrasodium pyrophosphate were blended to prepare high performance alkaline cleaning agents (ACASs). The results of cleaning test with steel specimen showed that ACAS-6 ($Na_2CO_3$ 50g/Na-OSi 35g/T-701 20g/303C 18g/PE-68 17g/MJU-100A 10g/TSPP 20g/ water 180g mixture) had a good cleaning power. The cleaning power for press-rust preventing oil was 98% and 99% degreasing at 4wt%, $70^{\circ}C$ and $90^{\circ}C$, respectively ; for quenching oil, the cleaning power of ACAS-6 was 91% degreasing at 4wt% and $70^{\circ}C$. The foam heights measured immediately after foaming by Ross & Miles method and Ross & Clark method at 6wt%, $60^{\circ}C$ were 18mm and 65mm, respectively. It was concluded that ACAS-6 had a good low foaming cleaning agent.

• 아시안잔디학회지
• /
• 제12권3호
• /
• pp.215-224
• /
• 1998

본 시험은 미국과 유럽으로부터 도입된 5개 초종 23개 품종의 한지형 잔디의 생육특성, 추위와 가뭄에 대한 내성, 내병성 및 녹색도를 조사하기 위하여 1995년 연암축산원예전문대학 잔디시험 포장에서 실시하였다. Kentucky bluegrass는 8개 품종중에 Newport 와 Glade가 우수하였는데 Newport는 균일성, 피복도, 질감 등에서 최고의 품질을 나타내었으며 여름철의 질병에도 강하였으나 녹색도가 옅고 가뭄에 대한 저항성, 가을철의 녹병에는 약하였고 늦가을의 녹색도가 유지되지 않는 단점이 있었으며 Glade 품종은 녹색도가 진하며 밀도, 피복도, 균일성, 여름철 질병과 녹병에 대한 저항성 등에서 모두 중상정도로 우수하였으나 가뭄에 대한 저항성과 질감이 다소 나쁘고 Pythium blight에 약하였다. Tall fescue는 5개 품종 중 Revel과 Revel Jr. 품종이 진한 녹색을 나타내었으며 밀도, 균일성, 피복도 등 거의 모든 조사항목에서 다른 품종에 비해 우수한 결과를 나타내었다. Red fescue는 봄철의 질감은 뛰어났지만 모든 품종이 여름장마철에 질병으로 사멸하였다. Ryegrass는 4개 품종중 Dandy 품종이 질감을 제외한 거의 모든 조사항목에서 다른 품종에 비해 매우 우수한 결과를 나타내었다.

• Structural Engineering and Mechanics
• /
• 제32권4호
• /
• pp.477-488
• /
• 2009

A slip critical joint has various values to adopt the proper slip coefficient in various conditions of faying surfaces in the following codes: AISC, AIJ and Eurocode 3. However, the Korean Building Code still regulates the unique slip coefficient, 0.45, regardless of the diverse faying conditions. In this study, the slip resistance test, including five kinds of surface treatments were conducted to obtain the proper slip coefficients available to steel plate KS SM490A. The faying surfaces were comprised of a clean mill, rust, red lead paint, zinc primer, and shot blast treatment. The candidates for high strength bolts were torque-shear bolts, torque-shear bolts with zinc coating, and ASTM A490 bolts. Based on the test results, the specimens with a shot blasted surface and rusted surface exhibited $k_s$, 0.61, and 0.5, respectively. It is recommended that the specimens with zinc primer exhibit $k_s{\geq}0.40$. The clean mill treated surface had prominently lower values, 0.27. For red lead painted treatment, the thickness of the coating affects the determinant of slip coefficient, so it is necessary to establish a minimum $k_s$ of 0.2, with a coating thickness of 65 ${\mu}m$. During 1,000 hours of relaxation, the uncoated surfaces exhibited the loss of clamping force behind 3%, while the coated surfaces within a certain limited thickness exhibited the loss of clamping within a range of 4.71% and 8.37%.

• Environmental Engineering Research
• /
• 제16권4호
• /
• pp.187-203
• /
• 2011

Chlorophenols (CPs) are widely used industrial chemicals that have been identified as being toxic to both humans and the environment. Zero valent iron (ZVI) and iron based bimetallic systems have the potential to efficiently dechlorinate CPs. This paper reviews the research conducted in this area over the past decade, with emphasis on the processes and mechanisms for the removal of CPs, as well as the characterization and role of the iron oxides formed on the ZVI surface. The removal of dissolved CPs in iron-water systems occurs via dechlorination, sorption and co-precipitation. Although ZVI has been commonly used for the dechlorination of CPs, its long term reactivity is limited due to surface passivation over time. However, iron based bimetallic systems are an effective alternative for overcoming this limitation. Bimetallic systems prepared by physically mixing ZVI and the catalyst or through reductive deposition of a catalyst onto ZVI have been shown to display superior performance over unmodified ZVI. Nonetheless, the efficiency and rate of hydrodechlorination of CPs by bimetals depend on the type of metal combinations used, properties of the metals and characteristics of the target CP. The presence and formation of various iron oxides can affect the reactivities of ZVI and bimetals. Oxides, such as green rust and magnetite, facilitate the dechlorination of CPs by ZVI and bimetals, while oxide films, such as hematite, maghemite, lepidocrocite and goethite, passivate the iron surface and hinder the dechlorination reaction. Key environmental parameters, such as solution pH, presence of dissolved oxygen and dissolved co-contaminants, exert significant impacts on the rate and extent of CP dechlorination by ZVI and bimetals.

• 한국균학회지
• /
• 제46권3호
• /
• pp.353-358
• /
• 2018

울릉미역취는 울릉도 원산이지만 한국에서 채소로 널리 재배된다. 울릉미역취의 녹병균은 2014년에 Coleosporium asterum으로 처음 보고되었다. 최근에 북미 시료를 중심으로 미역취속(Solidago)의 녹병균(Coleosporium)을 연구한 논문을 통하여 앞서 한국에서 보고된 울릉미역취 녹병균은 C. solidaginis에 포함시켜야 한다는 의견이 있었다. 이 의견을 확인하기 위하여 고려대학교 표본실에 보존된 울릉미역취 녹병균 시료 3점을 연구하여 C. solidaginis임을 확인하였다. 일본과 중국에서 보고된 양미역취의 녹병균은 C. asterum이나 C. solidaginis과는 구분되는 잠재종으로 추정된다. 본 연구를 통하여 그 동안 북미와 유럽에서만 알려졌던 C. solidaginis가 아시아에도 존재한다는 사실을 처음으로 보고한다.

• 보존과학연구
• /
• 통권34호
• /
• pp.110-122
• /
• 2013

정선 정암사 수마노탑의 부재는 탄산염암 중에서 돌로마이트이다. 이 탑은 전면에 걸쳐 백화에 의한 화학적 풍화가 진행되고 있고 기단부와 5층 이상의 옥개에서 부재간의 이격이 관찰되고 있다. 또한 부재 이격사이로 생물학적 풍화가 진행되고 있으며 3,5,6,7층 옥개에서 이탈부재가 관찰된다. 건 습식세척으로 생물과 백화일부를 제거하고, 스팀세척으로 잔여백화를 제거하였으며 기단부의 녹흔은 옥살산을 사용한 습포법으로 제거하였다. 이탈부재는 L-30과 Por-rok을 사용하여 고정시켰고, 기단부와 5층 이상의 옥개상부는 Por-rok을 사용하여 방수처리 하였다. 시공 후 방수처리한 구간에서는 백화현상이 나타나는 정도가 미약한것을 확인할 수 있었으므로 방수효과와 동시에 백화저감에도 효과가 있는 것으로 판단된다.