• The Plant Pathology Journal
• /
• v.26 no.1
• /
• pp.37-48
• /
• 2010

This paper describes a web-based information system for plant disease forecast that was developed for crop growers in Gyeonggi-do, Korea. The system generates hourly or daily warnings at the spatial resolution of $240\;m{\times}240\;m$ based on weather data. The system consists of four components including weather data acquisition system, job process system, data storage system, and web service system. The spatial resolution of disease forecast is high enough to estimate daily or hourly infection risks of individual farms, so that farmers can use the forecast information practically in determining if and when fungicides are to be sprayed to control diseases. Currently, forecasting models for blast, sheath blight, and grain rot of rice, and scab and rust of pear are available for the system. As for the spatial interpolation of weather data, the interpolated temperature and relative humidity showed high accuracy as compared with the observed data at the same locations. However, the spatial interpolation of rainfall and leaf wetness events needs to be improved. For rice blast forecasting, 44.5% of infection warnings based on the observed weather data were correctly estimated when the disease forecast was made based on the interpolated weather data. The low accuracy in disease forecast based on the interpolated weather data was mainly due to the failure in estimating leaf wetness events.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.6
• /
• pp.56-59
• /
• 2011

The demand for cold rolled steel (CR) for structural members is gradually increasing. If no surface treatment (coating for corrosion resistance) for CR is conducted, its use is very limited because CR is vulnerable to corrosion. Therefore, we need to develop a coating solution to provide high corrosion resistance for CR. In this study, an organic/inorganic coating solution with Si and Ti (Si polysilicate 7 wt.% + Urethane 13 wt.% + Ti amorphous 0.5 wt.%; LR-0727(1)) was used to evaluate the corrosion resistance of CR under a salt spray test. The specimens with the LR-0727(1) coating were heat treated in a drying oven at $120{\sim}210^{\circ}C$for 5 min. The corrosion resistance was investigated using a salt spray test of 7 h. In addition, an adhesive test was conducted. Rust showed under a heat treatment of $150^{\circ}C$, but no vestiges were found over $160^{\circ}C$. The specimens with heat treatment at $160^{\circ}C$ or more did not experience delamination. From these results, it is considered that the temperature limit for optimum heat treatment is $160^{\circ}C$ considering energy efficiency.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.5 no.3
• /
• pp.8-16
• /
• 2014

Torque control method and turn of nut method are specified as clamping method of high strength bolts in the steel construction specifications. Quality control of torque coefficient is essential activity because torque control method, which is presently adopted as clamping method in domestic construction sites, is affected by variation of torque coefficient. The clamping of torque shear bolt is based on KS B 2819. It was misunderstood that the tension force of the TS bolt was induced generally at the break of pin-tail specified. However, the clamping forces on slip critical connections do not often meet the intended tension, as it considerably varies due to torque coefficient dependent on the environmental factors and temperature variables despite the break of the pin tail.This study was focused to evaluate the effect of environmental factors and errors of installing bolts during tightening high strength bolts. The environmental parameters were composed of 'wet' condition, 'rust' condition, 'only exposure to air' condition. And the manufacture of trial product was planned to identify the induced force into the bolts. The algorithm for a trial product was composed of the relation between electricity energy taken from torque shear wrench and tension force from hydraulic tension meter.

• The Journal of the Korea Contents Association
• /
• v.18 no.2
• /
• pp.290-300
• /
• 2018

The point of discovering a new technique using colored glass and clay is to improve the existing inconveniences, which is compatible with the mutual physical property of ceramics clay and glass. It is easy to express the decoration of colored glass in vertical ceramics, but the aesthetic expression is limited due to the rust flowing down on horizontal ceramics. So the point is the discovery of a new expressive method that do not melt down in vertical objects. A new technique is to crush finely and dilute the colored glass using clay, and brushing it to the wall. Additionally, inlaid technique and paste brush technique were applied to further enhance aesthetic end. The plastic method is oxidation and reduction, and the coloration was different due to the plasticity method. Particularly, partial cutting of engraved color glass leads to forming gray-line soft gradation. This effect will be good to apply to production of work and industrial ceramics.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.1
• /
• pp.15-20
• /
• 2005

$Na_2CO_3$. Sodium orthosilicate (Na-OSi), Tetronix T-701 (T-701), Na-dioctyl sulfosuccinate (303C), Newpol PE-68 (PE-68), MJU-100A, and tetrasodium pyrophosphate were blended to prepare high performance alkaline cleaning agents (ACASs). The results of cleaning test with steel specimen showed that ACAS-6 ($Na_2CO_3$ 50g/Na-OSi 35g/T-701 20g/303C 18g/PE-68 17g/MJU-100A 10g/TSPP 20g/ water 180g mixture) had a good cleaning power. The cleaning power for press-rust preventing oil was 98% and 99% degreasing at 4wt%, $70^{\circ}C$ and $90^{\circ}C$, respectively ; for quenching oil, the cleaning power of ACAS-6 was 91% degreasing at 4wt% and $70^{\circ}C$. The foam heights measured immediately after foaming by Ross & Miles method and Ross & Clark method at 6wt%, $60^{\circ}C$ were 18mm and 65mm, respectively. It was concluded that ACAS-6 had a good low foaming cleaning agent.

• Asian Journal of Turfgrass Science
• /
• v.12 no.3
• /
• pp.215-224
• /
• 1998

These experiments were conducted to compare the growth characteristics, cold and drought tolerances, disease tolerance and color of the 23 varieties of four different species of cool-season turfgrass introduced from the United States of America and Europe at Yonam College in 1995. Newport and Glade of 8 Kentucky bluegrass varieties were recorded better marks than others. Newport variety was recorded the good marks in the disease tolerance of summer seasons, uniformity, coverage and texture, but the bad marks in color, drought tolerance and rust tolerance and stay green of automn seasons. Glade variety was recorded the good marks in the disease tolerance of summer seasons, uniformity and coverage, but the bad marks in drought tolerance, texture and Pythium blight tolerance. Revel and Revel Jr of 5 tall fescue varieties were recorded better marks than others in color, shoot density, uniformity, coverage, and tolerance of Pythium and Fusarium blight disease. All of red fescue varieties died of disease for rainy season however texture was the finest of all the species in spring season. Dandy of 4 ryegrass varieties was recorded better marks than others in color, shoot density, coverage, drought tolerance and tolerance of Pythium and Fusarium blight disease but texture.

• Structural Engineering and Mechanics
• /
• v.32 no.4
• /
• pp.477-488
• /
• 2009

A slip critical joint has various values to adopt the proper slip coefficient in various conditions of faying surfaces in the following codes: AISC, AIJ and Eurocode 3. However, the Korean Building Code still regulates the unique slip coefficient, 0.45, regardless of the diverse faying conditions. In this study, the slip resistance test, including five kinds of surface treatments were conducted to obtain the proper slip coefficients available to steel plate KS SM490A. The faying surfaces were comprised of a clean mill, rust, red lead paint, zinc primer, and shot blast treatment. The candidates for high strength bolts were torque-shear bolts, torque-shear bolts with zinc coating, and ASTM A490 bolts. Based on the test results, the specimens with a shot blasted surface and rusted surface exhibited $k_s$, 0.61, and 0.5, respectively. It is recommended that the specimens with zinc primer exhibit $k_s{\geq}0.40$. The clean mill treated surface had prominently lower values, 0.27. For red lead painted treatment, the thickness of the coating affects the determinant of slip coefficient, so it is necessary to establish a minimum $k_s$ of 0.2, with a coating thickness of 65 ${\mu}m$. During 1,000 hours of relaxation, the uncoated surfaces exhibited the loss of clamping force behind 3%, while the coated surfaces within a certain limited thickness exhibited the loss of clamping within a range of 4.71% and 8.37%.

• Environmental Engineering Research
• /
• v.16 no.4
• /
• pp.187-203
• /
• 2011

Chlorophenols (CPs) are widely used industrial chemicals that have been identified as being toxic to both humans and the environment. Zero valent iron (ZVI) and iron based bimetallic systems have the potential to efficiently dechlorinate CPs. This paper reviews the research conducted in this area over the past decade, with emphasis on the processes and mechanisms for the removal of CPs, as well as the characterization and role of the iron oxides formed on the ZVI surface. The removal of dissolved CPs in iron-water systems occurs via dechlorination, sorption and co-precipitation. Although ZVI has been commonly used for the dechlorination of CPs, its long term reactivity is limited due to surface passivation over time. However, iron based bimetallic systems are an effective alternative for overcoming this limitation. Bimetallic systems prepared by physically mixing ZVI and the catalyst or through reductive deposition of a catalyst onto ZVI have been shown to display superior performance over unmodified ZVI. Nonetheless, the efficiency and rate of hydrodechlorination of CPs by bimetals depend on the type of metal combinations used, properties of the metals and characteristics of the target CP. The presence and formation of various iron oxides can affect the reactivities of ZVI and bimetals. Oxides, such as green rust and magnetite, facilitate the dechlorination of CPs by ZVI and bimetals, while oxide films, such as hematite, maghemite, lepidocrocite and goethite, passivate the iron surface and hinder the dechlorination reaction. Key environmental parameters, such as solution pH, presence of dissolved oxygen and dissolved co-contaminants, exert significant impacts on the rate and extent of CP dechlorination by ZVI and bimetals.

• The Korean Journal of Mycology
• /
• v.46 no.3
• /
• pp.353-358
• /
• 2018

Solidago virgaurea subsp. gigantea is native to Ulleung-do, island in East Sea, and cultivated as a vegetable in Korea. Rust fungus on this plant was first reported as Coleosporium asterum in 2014. Recent studies on Solidago-Coleosporium association mainly based on North American materials suggested that the Korean isolates of C. asterum on S. virgaurea subsp. gigantea reported in Korea might be placed in the C. solidaginis clade. Accordingly, to confirm this suggestion, three additional Korean samples were morphologically and molecularly studied and identified as C. solidaginis in current species concept. Three specimens on S. altissima (syn. S. canadensis) from China and Japan were previously determined to be phylogenetically differentiated from C. solidaginis, hinting at a cryptic species. Therefore, this is the first confirmed report on the presence of C. solidaginis on Solidago spp. in Asia.

• 보존과학연구
• /
• s.34
• /
• pp.110-122
• /
• 2013

The Seven-story Stone Pagoda of Jeongamsa Temple consists of dolomitic limestone. The surface of the stone stupa is efflorescene. There are spaces between parts in the stereobate and part of roof at the fifth story and above. The space between parts is colonized by biological contaminants. There are breakaway parts in the third, fifth, sixth, seventh story. The dry and wet cleaning of all the biological contaminants, efflorescene. The steam cleaning of rest of efflorescene. The use of poultice with oxalic acid, were done to remove the rust. Breakaway parts are inosculated by L30 and Por-rok. Spaces between parts are waterproofing by Porrok. After treatment, the efflorescene of part of waterproofing are comparatively scarce. So waterproofing is effective at reduced efflorescene and waterproof.