• 대한토목학회논문집
• /
• 제34권3호
• /
• pp.723-728
• /
• 2014

세굴방지를 위하여 설치하는 해안구조물의 쇄파효과를 검증하기 위하여 수리조파실험이 실시된다. 하지만 수리조파실험을 실시하기 위해서 사용되는 실험 장치와 해안구조물의 제작에 많은 비용과 시간이 소요된다. 수치해석모델과 수리조파실험의 해석결과를 비교하여 검증하면, 수치모델을 활용하여 쇄파효과를 예측할 수 있고 실험 장치와 해안구조물 제작에 소요되는 비용과 시간을 절약할 수 있다. 본 연구에서는 다면체 사석 구조물을 대상으로 수치해석결과와 수리조파실험 결과의 처오름 및 처내림 높이 비교분석을 수행하였고 해석적 모의 조파실험 모델링 기법을 검증하였다. 또한, 사용한 수치해석 접근 방법을 활용하여 사석의 부피비와 마찰면적을 변화시켜 쇄파효과를 예측하였다.

• 한국추진공학회지
• /
• 제22권4호
• /
• pp.108-116
• /
• 2018

한국형발사체의 1단 및 2단 엔진으로 사용될 75톤급 액체로켓엔진의 연소시험이 엔진 연소시험설비에서 수행되었다. 이 엔진은 산화제로 극저온 유체인 액체산소를 사용하므로, 연소시험을 위해서는 필수적으로 설비의 공급 배관 및 엔진의 예냉과정이 진행되어 주어진 엔진 입구 온도 및 압력 요구조건이 만족되어야 한다. 따라서 향후 효율적인 시험 운용을 위해서는 시험 시 설비와 엔진에서의 예냉특성 및 예냉과정에서 소모되는 액체산소의 양을 파악하는 것이 중요하다. 이 논문에서는 75톤급 액체로켓엔진의 연소시험에서 예냉과정의 고찰을 통하여 런탱크 가압 전, 후 각 단계에서의 설비배관 및 엔진의 예냉특성을 평가하였으며, 시험 시 소모되는 액체산소의 양을 평가하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.631-636
• /
• 2000

In this paper a transfer method model was introduced in order to analyze critical speeds and vibration modes of a flexible rotor system, whose rotor shaft is cupped into and fitted with a thin-walled cylinder at its end. The computed analysis results were compared with those of the experimental modal test. Both results show good agreement each other. Furthermore the free-run(or run-down) test result for the real rotor system also shows that the proposed transfer matrix method modelling can be successfully applicable to analyzing accurate critical speeds(or natural frequencies) of the rotor system.

• 한국소음진동공학회논문집
• /
• 제21권9호
• /
• pp.828-833
• /
• 2011

A reaction wheel assembly(RWA) is the largest disturbance source that can induce high frequency micro-vibration on an optical payload of satellites. To ensure a tight pointing-stability budget of satellites, the RWA disturbance effect on spacecraft should be accurately analyzed and evaluated for whole design phases. For this purpose, the micro-vibration disturbance of RWA should be precisely measured. In the present study, two measurement methods on RWA micro-vibration disturbances are compared and investigated. One is a free run-down speed test and the other is a constant speed test. The micro-vibration data measured by the two methods are analyzed in terms of spectrum characteristics, static and dynamic imbalance values, and root sum square(RSS) values. The analysis results show that both methods can measure very similar results in time and frequency domains and that the free run-down speed method is more adequate in respects to wheel friction modeling, noise rejection of imbalance and RSS peak evaluation.

• KEPCO Journal on Electric Power and Energy
• /
• 제3권2호
• /
• pp.107-111
• /
• 2017

$1100^{\circ}C$급 가스터빈 동익의 국산화 개발품에 대한 신뢰성을 무고장시험법에 의해 평가하였다. 터빈 동익은 기동, 정지 중에 발생하는 공진 또는 유체유발진동을 겪는 등 터빈 운전 중 상시 다양한 동하중에 노출되어 있으며, 이러한 변동하중은 터빈 동익에 고주기피로손상을 초래한다. 특히 동익의 파손에 의한 사고는 타 설비로의 파급이 크고, 막대한 경제적 피해를 야기하기 때문에, 발전소의 안정적인 운전을 위해 동익의 신뢰성이 우선 검증되어야 한다. 동익에 균열을 일으키기 위해서 전자식 가진기를 이용하여 공진에 의한 증폭된 동하중을 부과하였다. 가스터빈 동익의 수명분포를 와이블 분포로 가정하여 를 시험 시간을 계산하고, 시료 1개의 고장을 허용하는 조건으로 총 5개의 개발품을 대상으로 시험을 수행하여, 개발품 동익의 목표 수명을 90% 신뢰도로 보증할 수 있다는 것을 90% 신뢰수준에서 확인하였다.

• 제어로봇시스템학회논문지
• /
• 제21권4호
• /
• pp.301-308
• /
• 2015

In this paper, we propose an LTBC (Low Tension and Load Balance Control) scheme to improve a coiling shape control by reduction the tension fluctuation by the torque disturbance in the down coiler process of hot strip mills. The proposed controller is a combination of an LTC to control the overload at load-on in the mandrel and an LBC to regulate the load balance of the upper and bottom pinch roll. A tension calculation model is suggested with the concept of the tension deviation. The effectiveness of the proposed control scheme is verified from simulation under a disturbance of the pinch roll torque. Using a field test, we show that the performance of the shape and tension control is improved by the LTBC control.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권6호
• /
• pp.109-116
• /
• 2020

The study examines the nexus between financial development and economic growth in India during Q1: 1996 to Q3: 2018. This study employs time-series data of real GDP and ratio of broad money to GDP as a proxy for economic and financial development, respectively. The data are obtained from RBI database on the Indian economy. All variables are seasonally adjusted using X12-arima technique and expressed in natural logarithm form. Non-linear Autoregressive Distributed Lag (NARDL) bound test has been used to check for cointegrating relationship of these two variables. Empirical findings suggest that, unlike in the short run, in the long run financial development does impact economic growth positively. Further, a symmetric effect of positive and negative components of financial development is found for the Indian economy, whereas the effect of control variable like exchange rate and trade openness is in consonance with common economic intuition. Exchange rate is in consonance with intuitive economic logic that a fall in exchange rate makes exports cheaper and increases the quantity of export, which improves the balance of payment and leads to a rise in aggregate demand, hence improves economic growth. This paper contributes to the existing literature on India by breaking down financial indicator into positive and negative components to examine the finance-growth relationship.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1657-1663
• /
• 2022

This study uses data from 1970 to 2016 to analyze the effect of nuclear energy use on CO₂ emissions and attempts to validate the EKC hypothesis using the Fourier Autoregressive Distributive Lag model in India for the first time. Because of India's rapidly rising population, the environment is being severely strained. However, with 22 operational nuclear reactors, India boasts tremendous nuclear energy potential to cut down on CO₂ emissions. The EKC is validated in India as the significant coefficients of GDP and GDP.² The short-run estimates also suggest that most environmental externalities are corrected within a year. Given the findings, some policy recommendations abound. The negative statistically significant coefficient of nuclear energy consumption is an indication that nuclear power expansion is essential to achieving clean and sustainable growth as a policy goal. Also, policymakers should enact new environmental laws that support the expansion and responsible use of nuclear energy as it is cleaner than fossil fuels and reduces the cost and over-dependence on oil, which ultimately leads to higher economic growth in the long run. Future research should consider studying the nonlinearities in the nuclear energy-CO₂ emissions nexus as the current study is examined in the linear sense.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.514-520
• /
• 2001

A 300Wh class flywheel energy storage system using high Tc superconductor bearings(HTC SFES) is being developed by KIMM and KEPRI. HTC SFES consists of a flywheel rotor, superconductor bearings, a motor/generator and its controller, touch-down bearings, vacuum chamber, etc. Stiffness and damping values of superconductor bearings were experimentally estimated to be 67,700N/m and 29Ns/m respectively. The present HTC SFES was designed to have maximum operating speed of 33000 rpm, which is far above 2 rigid body mode critical speeds of 645rpm and 1,275rpm. Leaf-spring type touch-down bearing were utilized to have the system pass safely through the system critical speeds. It has been experimentally verified that the system can run stably up to 28,000 rpm so that HTC SFES is now expected to reach up to its maximum design speed of 33,000rpm without any difficulties. The Halbach array motor & generator has also been proven its effectiveness on transferring electrical energy to a rotaing composite flywheel in kinetic form.

• 천문학회지
• /
• 제48권4호
• /
• pp.213-228
• /
• 2015

The Horizon Run 4 is a cosmological N-body simulation designed for the study of coupled evolution between galaxies and large-scale structures of the Universe, and for the test of galaxy formation models. Using 6300³ gravitating particles in a cubic box of L_box = 3150 h⁻¹Mpc, we build a dense forest of halo merger trees to trace the halo merger history with a halo mass resolution scale down to M_s = 2.7 × 10¹¹h⁻¹M_⊙. We build a set of particle and halo data, which can serve as testbeds for comparison of cosmological models and gravitational theories with observations. We find that the FoF halo mass function shows a substantial deviation from the universal form with tangible redshift evolution of amplitude and shape. At higher redshifts, the amplitude of the mass function is lower, and the functional form is shifted toward larger values of ln(1/σ). We also find that the baryonic acoustic oscillation feature in the two-point correlation function of mock galaxies becomes broader with a peak position moving to smaller scales and the peak amplitude decreasing for increasing directional cosine μ compared to the linear predictions. From the halo merger trees built from halo data at 75 redshifts, we measure the half-mass epoch of halos and find that less massive halos tend to reach half of their current mass at higher redshifts. Simulation outputs including snapshot data, past lightcone space data, and halo merger data are available at http://sdss.kias.re.kr/astro/Horizon-Run4.