• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.627-628
• /
• 2006

High speed milling process is emerging as an important fabrication process benefits include the ability to fabricate micro and meso-scale parts out of a greater range of materials and with more varied geometry. It also enables the creation of micro and meso-scale molds for injection molding. Factors affecting surface roughness have not been studied in depth for this process. A series of experiments has been conducted in order to begin to characterize the factors affecting surface roughness and determine the range of attainable surface roughness values for the high speed milling process. It has previously been shown that run-out creates a greater problem for the dimensional accuracy of pans created by high speed milling process. And run-out also has a more significant effect on the surface quality of milled parts. The surface roughness traces reveal large peak to valley variations. This run-out is generated by spindle dynamics and tool geometry. In order to investigate the relationship between tool alignment errors and surface roughness the scallop generating mechanism in the ball-end milling with tool alignement errors has been studied and simulated. The results indicate that tool alignment errors have no significant effects ell the dimension of scallops in for flat planes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.580-581
• /
• 2012

• 노동경제논집
• /
• 제21권2호
• /
• pp.17-46
• /
• 1998

In this paper, I pursue an empirical analysis of different patterns of employment and wage adjustments to demand changes for the US and Japan. Analyzed are the data in the 70's and 80's, the period that the two countries are believed to show most conspicuous diverging patterns. Using the framework of cointegration and error correction, I establish that in the US it is employment level, while in Japan it is wages, that is more responsive to output fluctuations both in the long run and the short run. All the comparisons on the long run relationships are estimated and tested based on the system cointegrating regressions, and the transition from the short run to the long run responses are investigated using impulse response analysis of the error correction models. I also study differences across genders and establishment sizes within each country. For males and females in Japan, the adjustments are significantly different both in the long run and the short run, but for the firms of different sizes they diverge only in the short run. In contrast to some of the earlier work, the gender effect turns out to be insignificant in the US.

• 한국식생활문화학회지
• /
• 제19권6호
• /
• pp.630-639
• /
• 2004

Korean households' expenditures on foodservices are on the steady increase. This paper aims to examine the foodservice expenditures of salary and wage earners's households by income decile group. This is analysed through comparing foodservice expenditures with private education expenditures because households' expenditures are likely to be weighted in favor of eating-out rather than private education. We also model the consumption function in terms of income and price, examining the responsiveness of private education demand and eating-out demand to changes in income and price using econometric methods such as regression, rolling regression and impulse response. This paper show that foodservice demand increases more than the private education does in the long-run. The result indicates that households are likely to evaluate the desire for foodservice more important than private education contrary to our expectations in the long-run. The impulse response analysis, however, suggests that households tend to increase private education expenditures rather than eating-out expenditures in the short-run.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.956-959
• /
• 2004

Recently the monitoring system of tool setting in high speed precision machining center is required for manufacturing products that have highly complex and small shape, high precision and high function. It is very important to reduce time to setup tool in order to improve the machining precision and the productivity and to protect the breakage of cutting tool as the shape of product is smaller and more complex. Generally, the combination of errors that geometrical clamping error of fixing tool at the spindle of machining tool and the asynchronized error of driving mechanism causes that the run-out of tool reaches to 3$^{\sim}$20 times of the thickness of cutting chip. And also the run-out is occurred by the misalignment between axis of tool shank and axis of spindle and spindle bearing in high speed rotation. Generally, high speed machining is considered when the rotating speed is more than 8,000 rpm. At that time, the life time of tool is reduced to about 50% and the roughness of machining surface is worse as the run-out is increased to 10 micron. The life time of tool could be increased by making monitoring of tool-setup easy, quick and precise in high speed machining tool. This means the consumption of tool is much more reduced. And also it reduces the manufacturing cost and increases the productivity by reducing the tool-setup time of operator. In this study, in order to establish the concept of tool-setup monitoring the measuring method of the geometrical error of tool system is studied when the spindle is stopped. And also the measuring method of run-out, dynamic error of tool system, is studied when the spindle is rotated in 8,000${\sim}$60,000 rpm. The dynamic phenomena of tool-setup are analyzed by implementing the monitoring system of rotating tool system and the non-contact measuring system of micro displacement in high speed.

• 지질공학
• /
• 제27권1호
• /
• pp.59-66
• /
• 2017

최근들어 발생하는 강우는 지금까지의 강우특성과 비교하여 여름철에 단기간 집중적으로 내리는 형태로 바뀌고 있다. 2011년 강원도 춘천지역에서는 이러한 집중강우로 인해 많은 산사태가 발생하였으며, 이로 인해 재산피해와 인명피해를 야기시켰다. 본 연구의 목적은 강우에 의한 산사태 물질의 이동에 대한 특성을 분석하기 위해서 현장 자료와 수치해석 자료를 활용하여 시간에 따른 특성의 변화 및 강우량에 따른 특성의 변화를 분석하는 것이다. 본 연구에서는 항복응력 값의 변화를 통해서 강우량을 재현하였으며, 이를 통해서 어떠한 거동 특성을 보이는지 해석하였다. 그 결과 많은 강우에 의해 항복응력 값이 낮아지는 경우가 빠른 속도의 이동형태를 보이고 동시에 넓은 지역에 걸쳐 확산되는 특성을 확인하였으며, 이러한 결과는 현장에서 확인된 토석류의 흔적과 매우 유사하다는 것을 확인하였다. 본 연구를 통해서 산사태 발생 당시의 토석류 최대 속도 및 최대 두께 등을 파악하는 것이 가능하다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1066-1069
• /
• 2004

Recently the monitoring system of tool setup in high speed precision machining tool is required for manufacturing products that have highly complex and small shape, high precision and high function. It is very important to reduce time to setup tool in order to improve the machining precision and productivity and to protect the breakage of cutting tool as the shape of product is smaller and more complex. Generally, the combination of errors that geometrical clamping error of fixing tool at the spindle of machining center and the asynchronized error of driving mechanism causes that the run-out of tool reaches to 3∼20 times of the thickness of cutting chip. And also the run-out is occurred by the misalignment between axis of tool shank and axis of spindle and spindle bearing in high speed rotation. Generally, high speed machining is considered when the rotating speed is more than 8,000 rpm. At that time, the life time of tool is reduced to about 50％ and the roughness of machining surface is worse as the run-out is increased to 10 micron. The life time of tool could be increased by making monitoring of tool-setting easy, quick and precise in high speed machining center. This means the consumption of tool is much more reduced. And also it reduces the manufacturing cost and increases the productivity by reducing the tool-setup time of operator. In this study, in order to establish the concept of tool-setting monitoring the measuring method of the geometrical error of tool system is studied when the spindle is stopped. And also the measuring method of run-out, dynamic error of tool system, is studied when the spindle is rotated in 8,000 ∼ 60,000 rpm. The dynamic phenomena of tool-setup is analyzed by implementing the monitoring system of rotating tool system and the noncontact measuring system of micro displacement in high speed.

• 한국해양공학회지
• /
• 제16권3호
• /
• pp.40-45
• /
• 2002

In this study, the effects on hydraulic characteristics are discussed as the permeable underlayer thickness of the rubble mound structure changes. A series of hydraulic experiments were performed and wave run-up, reflection and set-up were investigated. Result indicated that wave run-down was affected by the water out from the permeable underlayer during down-rush. As the thickness increased, relative wave run-up decreased.

• 경영과정보연구
• /
• 제25권
• /
• pp.83-114
• /
• 2008

We examine whether spinoffs improve long-run stock returns and analyze the factors of long run stock returns. The measures of long run stock returns are CAR(Cumulative Abnormal Returns) and BHAR(Buy and Hold Abnormal Returns). The expected factors of abnormal returns are methods of spinoffs, size, BV/MV, administrative costs, cashflow and Herfindahl index. We find that long-run returns of the case such as carve-out methods, small size, high BV/MV, low administrative costs, low cashflow and low Herfindahl index are larger than those of other cases. We show positive relationship between spinoffs and long-run stock returns(CAR and BHAR). The results supports spinoffs, as the methods of focusing on core business, are very usefulness of corporate restructuring.

• 멤브레인
• /
• 제20권3호
• /
• pp.241-248
• /
• 2010

$0.4\;{\mu}m$의 세공크기를 갖고 있는 평막이 침지된 연속회분식 반응기에서 유입 유기물 농도가 영양염류 제거에 미치는 영향을 조사하였다. 분리막의 여과성능과 영양염류 제거효과를 규명하기 위하여 유입 유기물의 농도를 200 mg/L (Run-1), 400 mg/L (Run-2) 및 800 mg/L (Run-3)로 연속적으로 변화시키면서 실험하였다. COD/N 및 COD/P의 비가 증가할수록 T-N 및 T-P의 제거율은 모두 증가하였다. Run-1, Run-2 및 Run-3에서 T-N의 평균 제거율은 각각 28.1, 32.6 및 90.4%이었으며, 투과수의 T-N 평균 농도는 각각 32.0, 30.0 및 4.3 mg/L 이었다. 또한 Run-1, Run-2 및 Run-3에서 T-P의 평균 제거율은 각각 13.6, 35.3 및 93.1%이었으며, 투과수의 T-P 평균 농도는 각각 3.11, 2.33 및 0.25 mg/L이었다.