DOI QR코드

DOI QR Code

Analysis of Debris Flow of Chun-cheon Landslide Area using Numerical Methods

수치해석을 통한 춘천 산사태지역 토석류 거동 분석

  • Choi, Junghae (Climate Change Mitigation and Sustainability Division, Korea Institute of Geoscience and Mineral Resources)
  • 최정해 (한국지질자원연구원, 전략기술연구본부)
  • Received : 2017.02.22
  • Accepted : 2017.03.06
  • Published : 2017.03.31

Abstract

The characteristic of recent rainfall pattern in Korea is concentrated in summer season and it is very different compare with former characteristic. In 2011, there was heavy rainfall in Chuncheon city of northern part of Korea. Because of rainfall in short time, many landslides were occurred in narrow area and many people were killed by these landslides at that time. The purpose of this study is to calculate run-out distance of debris flow and analyze the movement properties of debris flow according to the elapsed time using numerical analysis method at that time. The debris 2D program, which is developed by prof. Liu in National Taiwan University, was used in this study. Run-out distance of debris flow was calculated under different yield strength conditions which were controlled by rainfall amount. The results reveal that absolute maximum velocity of the debris flow is about 8.1 m/s and maximum depth of debris flow is about 7 m when debris flow was occurred. The run-out distance after 500 sec is about 300 m from end of the valley. It is very well similar with actual debris flow run-out distance. From these results, we can presume the maximum velocity and depth of debris flow at that time.

최근들어 발생하는 강우는 지금까지의 강우특성과 비교하여 여름철에 단기간 집중적으로 내리는 형태로 바뀌고 있다. 2011년 강원도 춘천지역에서는 이러한 집중강우로 인해 많은 산사태가 발생하였으며, 이로 인해 재산피해와 인명피해를 야기시켰다. 본 연구의 목적은 강우에 의한 산사태 물질의 이동에 대한 특성을 분석하기 위해서 현장 자료와 수치해석 자료를 활용하여 시간에 따른 특성의 변화 및 강우량에 따른 특성의 변화를 분석하는 것이다. 본 연구에서는 항복응력 값의 변화를 통해서 강우량을 재현하였으며, 이를 통해서 어떠한 거동 특성을 보이는지 해석하였다. 그 결과 많은 강우에 의해 항복응력 값이 낮아지는 경우가 빠른 속도의 이동형태를 보이고 동시에 넓은 지역에 걸쳐 확산되는 특성을 확인하였으며, 이러한 결과는 현장에서 확인된 토석류의 흔적과 매우 유사하다는 것을 확인하였다. 본 연구를 통해서 산사태 발생 당시의 토석류 최대 속도 및 최대 두께 등을 파악하는 것이 가능하다.

Keywords

References

  1. Julien, P. Y. and Lan, Y., 1991, Rheology of hyperconcentrations, Journal of Hydraulic Engineering ASCE, 117(3), 346-353. https://doi.org/10.1061/(ASCE)0733-9429(1991)117:3(346)
  2. Liu, K. F. and Huang, M. C., 2006, Numerical simulation of debris flow with application on hazard area mapping, Computational Geoscience, 10(2), 221-240. https://doi.org/10.1007/s10596-005-9020-4
  3. Hanson, G. J. and Simon, A., 2001, Erodibility of cohesive streambeds in the loess area of the midwestern USA, Hydrological Processes, 15(1), 23-38. https://doi.org/10.1002/hyp.149
  4. Hanson, G. J. and Cook, K. R., 2004, Apparatus, test procedures, and analytical methods to measure soil erodibility in situ, Applied Engineering in Agriculture, 20(4), 455-462.
  5. Nam, S., Petrie, J., Diplas, P., and Gutierrez, M., 2010, Effects of spatial variability on the estimation of erosion rates for cohesive riverbanks, International Conference on Fluvial Hydraulics (River Flow 2010), 8-10.
  6. Takahashi, T., 2007, Debris flow :Mechanics, Prediction and Countermeasures, Taylor & Francis, New York, USA, 448.
  7. Arattano, M. and Marchi, L., 2008, Systems and sensors for debris-flow monitoring and warning, Sensors 8, 2436-2452. https://doi.org/10.3390/s8042436
  8. Liu, K. F. and Hsu, Y. C., 2008, Study on the sensitivity of parameters relating to debris flow spread, In Proceedings of the International Conference, Debris Flows: Disasters, Risk, Forecast, Protection, Pyatigorsk, Russia.
  9. Liu, K. F. and Lee, F. C., 1997, Experimental analysis on impact mechanism of granular flow, Chinese Journal of Mechanics, 13(1) 87-100.
  10. Liu, K. F., Li, H. C. and Hsu, Y. C., 2009, Debris flow hazard assessment with numerical simulation, Natural Hazards, 49, 137-161. https://doi.org/10.1007/s11069-008-9285-8
  11. Liu, K. F., Wei, S. C., and Li, P. C., 2013, The influence of accumulated precipitation on debris flow hazard area, Journal of Chinese Soil and Water Conservation, 44(3), 225-233.
  12. Liu, K. F. and Wu, Y. H., 2010, The Assessment of Debris Flow Hazard in Korea Using Debris-2D, 2010-International Symposium in Pacific Rim, Taipei, Taiwan, 820-827.
  13. Liu, K. F. and Wu, Y. H., 2013, Introduction to Debris-2D - A Debris Flow Simulation Program, TXT-tool 3.886-1.1: In (Sassa K. eds.) ICL Landslide Teaching Tools (ISBN: 978-4-9903382-2-0), 238-246.