• Journal of Korean Institute of Industrial Engineers
• /
• 제24권3호
• /
• pp.367-379
• /
• 1998

This paper considers two modes of partially accelerated life tests for items having Weibull lifetime distributions. In a use-to-acclerated mode each item is first run at use condition and, if it does not fail for a specified time, then it is run at accelerated condition until a predetermined censoring time. In an accelerated-to-use mode each one is first run at accelerated condition and, if it does not fail for a specified time, then it is run at use condition. Maximum likelihood estimators of the parameters of the lifetime distribution at use condition, and the 'acceleration factor' are obtained. The stress change time for each mode is determined to minimize the asymptotic variance of the acceleration factor, and the two modes are compared. For selected values of the design parameters the optimum plans are obtained, and the effects of the incorrect pre-estimates of the design parameters are investigated. Minimizing the generalized asymptotic variance of the estimators of the model parameters is also considered as an optimality criterion.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2007년도 제6회 추계학술대회 및 정기총회
• /
• pp.85-91
• /
• 2007

• Proceedings of the Korean Information Science Society Conference
• /
• 한국정보과학회 2001년도 봄 학술발표논문집 Vol.28 No.1 (A)
• /
• pp.388-390
• /
• 2001

본 논문은 변형성과 재 사용성이 우수한 컴포넌트 기반의 어플리케이션 서버 플랫폼을 구현하는데 필수적인 기술인, 워크플로우 관리 기술의 Built-Time 부분의 설계 및 구현을 다룬다. 워크 플로우 관리 시스템의 기능은 크게 Build-Time 부분과 Run-Time 부분으로 나누어서지는데, Build-Time 부분은 워크플로우프로세스를 사용하기 전에 정의하는 관점에서 기능을 수행하고 Run-Time 부분은 설정된 워크플로우 프로세스 정의에 따라 프로세스를 실제로 동작시키는 관점에서 기능을 수행한다. Run-Time 부분은 워크플로우 관리 시스템의 핵심 부분인 워크플로우 엔진 모듈을 포함하고 있다. 본 논문은 Build-Time 부분을 다룬다. 본 논문에서는 우리가 구현한 워크플로우 관리 시스템의 다양한 형태의 프로세스를 지원하는 프로세스 정의 모델과 그에 대한 XML 구조의 설계 및 프로세스 정의에 대한 객체를 설계하고 구현하였다.

• Membrane and Water Treatment
• /
• 제11권2호
• /
• pp.141-149
• /
• 2020

Prechlorination could increase the removal efficiency of Synedra, but there was no significant effect of increasing the amount of chlorine added. However, a removal efficiency of greater than 80% was noted when ozone was injected at concentrations greater than 2 mg/L. Also, it was found that on addition of polyamine, a removal efficiency of 80% or more could be achieved. As a result of the analysis of field operation data from the water treatment plants G and B, it was found that at water treatment plant G, the filter run time decreased to 10 hours or less when only coagulant was injected, but the filter run time increased to around 40 hours when polyamine (3 mg/L) was also injected. The Synedra population in the raw water subsequently increased to 2,340 cells/mL, and the filter continued running for more than 20 hours. At water treatment plant B, the average Synedra removal efficiency was 56% when only coagulant was injected, and the filter run time decreased drastically with the increasing population of Synedra in the raw water. However, the removal efficiency of Synedra reached 79% when polyamine was injected together with the coagulant, 90% when ozone was also injected, and 95% when polyamine and ozone were injected together and the filter continued running for over 50 hours. The filter run time was maintained at 60 hours when a Synedra population of 6,890 cells/mL flowed into the Paldang water source, but the filter run time with Synedra at 1,960 cells/mL decreased rapidly from 65 hours to 35 hours when the ratio of the size of the individual Synedra reaching 250 ㎛ or more, increased from 38% to 94%. Therefore, the size of the Synedra is considered to be a factor that significantly influences filter clogging, as well as the size of the Synedra population.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.247-250
• /
• 2006

Maximizing the productivity in reactive ion etching, early detection of process equipment anomaly became crucial in current high volume semiconductor manufacturing environment. To address the importance of the process fault detection for productivity, support vector machines (SVMs) is employed to assist the decision to determine process faults in real-time. SVMs for eleven steps of etching runs are established with data acquired from baseline runs, and they are further verified with the data from controlled (acceptable) and perturbed (unacceptable) runs. Then, each SVM is further utilized for the fault detection purpose utilizing control limits which is well understood in statistical process control chart. Utilizing SVMs, fault detection of reactive ion etching process is demonstrated with zero false alarm rate of the controlled runs on a run to run basis.

• Korean Journal of Applied Biomechanics
• /
• 제24권4호
• /
• pp.359-365
• /
• 2014

A study was conducted to investigate the possible effects of fatigue which was resulted from increased running time on the stability during a prolonged run. The purposes of this study were twofold: first, to determine the discrete and non-linear variability of GRF (ground reaction force) components between running times to know the body stability, and second, to determine the pattern between discrete and non-linear variability. Nineteens healthy young adult males served in this study as subjects who ran at their preferred running speed. GRF data for twenty strides were collected at 5, 65, and 125 minutes during run. Variance coefficient and Lyapunov Exponent techniques on the GRF data were used to calculate variability index for each of the running time conditions. There were no difference between discrete variabilities of three components of GRF, but non-linear variability of the Fz component of GRF was decreased by increasing running time (p<.01). No relationship was found between discrete and non-linear variability.

• Journal of the Korean Statistical Society
• /
• 제15권1호
• /
• pp.31-45
• /
• 1986

It is often necessary to obtain some run orders in factorial designs which have a small number of factor level changes and a small linear time trend. In this paper we propose an algorithm to find optimal or near-optimal run orders for $2^4, 2^5, 3^2$ and $2\cdot 3^2$ factorial designs under the criterion that the number of factor level changes and the linear time trend should be simultaneously small.

• Korean Journal of Exercise Nutrition
• /
• 제14권2호
• /
• pp.63-68
• /
• 2010

This study evaluated the effects of high pressured red ginseng(HRG) and ginseng berry(GB) supplementation on lipid profiles and run to exercise time in SD rats. Five weeks-old male rats were randomly assigned into six groups, ie. control group(AC: n = 8), exercise group(AE: n = 7), general extracted red ginseng group(C: n = 8), HRG group(high density D: n = 8, low density E: n = 7), and HRG + GB group(F: n = 7). The AC and AE groups had a supplementation of AIN-93G, and AE group performed 40 min treadmill exercise five times per week for five weeks. E, C, D, and F groups had a supplementation composed of general extracted red ginseng(GRG), HRG(250 mpk and 500 mpk), and HRG(250 mpk) + GB(167 mpk) in the AIN-93G. Main results of the study were as follow 1) the duration of running time to exhaustion was higher in exercise group compared to other groups. HRG had no effect on run to exhaustion time, but, GRG and HRG + GB showed longer run time than control groups. 2) Blood TC, TG, HDL-C and liver TG showed no difference between groups, but, liver TC showed lower level in the HRG groups than other groups. It was concluded that the 5 weeks of supplementation of HRG extract would have positive effects on liver cholesterol, and GRG and HRG + GB have a positive effect on exercise performance tested run to exhaustion time, but, we can not find a positive effect of supplementation of HRG on exercise performance.

• Proceedings of the Korean Information Science Society Conference
• /
• 한국정보과학회 2007년도 한국컴퓨터종합학술대회논문집 Vol.34 No.1 (B)
• /
• pp.255-260
• /
• 2007

내장 실시간 시스템은 논리적 정확성과 시간적 정확성을 모두 만족해야 하는 내장 시스템이다. 시스템의 시간적 정확성을 위해서는 해당 시스템에서 동작하는 태스크들의 스케줄링 가능성을 검사해야 한다. 스케줄링 가능성을 분석하기 위해서는 태스크의 실행 시간 분석이 선행 되어야 한다. 하지만 태스크의 실행 시간은 실행 시점에 따라 가변적이기 때문에 태스크의 정확한 실행 시간을 알아내기는 힘들다. 따라서 가능한 모든 경우를 고려하여 해당 태스크를 구성하는 코드 경로 중 최악의 경로일 경우의 실행 시간인 최악 실행 시간을 이용한다. 기존의 정적 최악 실행 시간 분석을 하는 도구의 경우 동적인 상황의 정보 부재로 인해 최악 실행 시간의 과대 측정 비율이 높다는 문제점이 있다. 본 논문에서는 정적 최악 실행 시간 분석 시 과대 측정 비율을 줄이기 위해 대상 기기에 실행 정보를 적용한 RunInfo(WCET analysis tool using the Run-Time Information) 분석 도구를 설계하고 구현한다. 실행 정보를 정의하고, RunInfo 분석 도구의 구조에 대해 설명한다. 그리고 실행 정보를 적용할 때, 고려할 점에 대해 알아본다. 성능 평가를 위해 RunInfo 분석 도구의 과대 측정 비율을 기존의 분석도구와 비교한다.

• The KIPS Transactions:PartA
• /
• 제10A권4호
• /
• pp.295-304
• /
• 2003

Active object is an Independent runnable unit which is scheduled by CPU in creation time. In this paper, we define the active object and suggest ART(Active object RunTime support systems) which controls creation and execution of the active object. ART can Provide users locational transparency and support easy method call mechanism. We also designed a communication model among active objects and implemented a communication method to make the distributed programing possible. The implementation target platform of ART is an embedded system which has only limited resources and runs in the distributed computing environment.