• 한국도로학회논문집
• /
• 제15권3호
• /
• pp.31-36
• /
• 2013

PURPOSES: This study is to investigate a generated traffic noise when vehicle pass over a transverse rumble strip at toll plaza of highway. METHODS: To investigate traffic noise at toll plaza of highway, Pass-by method which is the most common used for measuring traffic noise was adopted and the traffic noise at toll plaza was measured for 10 min per hour for 11hours(13:00~24:00). RESULTS: The measured traffic noise by pass-by method was changed as function of the transverse rumble strip configuration. Generally, the maximum difference among three noise measurement sections was 7 dB(A). It might be related with traffic speed. Also, the measured traffic noise was strongly generated from a passenger car which was 2 axle. It means that the most of traffic noise on the road is generated at tire/pavement interface of the passenger car. CONCLUSIONS: The traffic noise was strongly related with vehicle speed and transverse rumble strip configuration on the road. For driver safety, the transverse rumble strip is definitely necessary. However, the complaints from residents near highway was increased by traffic noise from transverse rumble strip. Therefore, To satisfy both safety and reduction of traffic noise, the development of configuration of transverse rumble strip is necessary in the further study.

• 대한교통학회지
• /
• 제24권7호
• /
• pp.7-14
• /
• 2006

최근 개통되고 있는 고속도로는 설계속도 및 제한속도가 상향되고 있어 주행환경의 양호성 확보와 함께 이에 따른 다양한 안전시설물들이 설치되고 있다. 특히 양호한 선형으로 인한 졸음운전이나 야간 및 이상기후로 차로를 제대로 볼 수 없을 때 차량의 차로 이탈사고를 미리 방지할 수 있도록 하는 노면요철포장(rumble strip)의 설치가 꾸준히 증가하고 있다. 그러나 이러한 시설물이 운전자에게 미치는 효과의 크기가 얼마나 되는지에 대한 실질적인 연구가 미흡하여 명확한 효과를 제시하지 못하고 있는 실정이다. 본 연구에서는 운전 중인 운전자 뇌파를 측정하여 도로구간에서 적정한 데이터를 수집하고 수집된 자료로부터 노면요철포장(rumble strip)의 효과를 분석할 수 있는 방법 및 생체 신호 파라메터를 제시하였다. 분석결과 뇌의 중심엽 부위에서 추출된 세타파 값은 본선 2차로 주행구간에서 0.619, 노면요철포장(Rumble strip)구간에서 0.157으로 0.462가감소하여 본선 2차로 구간대비 약 74% 수치 감소를 보였으며 신뢰수준 95%에서 통계적으로 유의한 결과를 나타내었다. 이러한 수치의 감소는 운전자의 각성이 그 만큼 증가하였음을 의미하는 것으로 노면요철포장의 효과에 대한 운전자 측면의 수치적 해석이 가능함을 나타낸다

• 한국도로학회논문집
• /
• 제15권6호
• /
• pp.93-101
• /
• 2013

PURPOSES : The rumble strip installed at the highway near the tollgate has the purpose to reduce the vehicle velocity or prevent sleepiness by awakening people to the danger. These rumble strip has different vibration decibel from the rumble strip shapes, resulting in some fatigue damage to human because a driver suffers from a lot of stress and displeasure. In this connection, the objective of this paper is to analyze the vibration decibel perceived by a driver in the vehicle under some conditions. METHODS : The vibration decibel conveyed from the tire can be analyzed. The frequency analysis methods were used according to DFT (Discrete Fourier Transform) analysis, FFT (Fast Fourier Transform) analysis, CPB (Constant Percentage Bandwidth) analysis. But the frequency analysis method in this paper is the 1/24 OCT(Octave) band analysis because of the convenience of the analysis and the overall vibration amplitude along the frequency. RESULTS : By using the results of the vibration decibel after analyzing the 1/24 OCT band analysis, these results can be compared from some conditions (e.g., rumble strip shape, uniform velocity of a vehicle, road condition, mass of a vehicle). As a result, the numerical values of decibel are not directly proportional to the vehicle velocity. CONCLUSIONS : At the condition that a vehicle is passing by the rumble strip, the value of a vibration decibel at the rumble strip of the cylinder shape is smaller than the rumble strip of rectangular shape regardless of the rumble strip depth and width. At the mass condition, the more a vehicle is massive, the more the vibration decibel increases. At the road condition, the vibration decibel at the wet road is smaller than the value at dry road condition.

• 한국안전학회지
• /
• 제31권1호
• /
• pp.95-104
• /
• 2016

In general, the crash reduction effect of the rumble strip is reported to be about 30% in Korea, while it is about 40-60% in the United States. However, the effect is erroneously overestimated because the simple comparison was only made before and after the installation. Accordingly, this study will reassess the crash reduction effect of the rumble strip. The study will also examine the former's geometric characteristics as well as its effect on the causes of the crash. This study analyzed the crash effect while taking into consideration the changes in the horizontal and vertical alignment, including the width of pavement shoulders, using the crash data for two years before and after the installation of the rumble strip. The types of crash caused by the rumble strip were identified using the classification discriminant function. The crash effect on the rumble strip is estimated to be 28.3%, but the pure effect, with the exception of the effect by other elements, was analyzed to be 7.4%. For each expressway design element, the downhill section (2.0-3.0%), the section with less than 3,000 m and more than 10,000 m of the curve radius, and the section with less than 3.0 m of the pavement shoulder width were found to be effective in crash reduction. For each cause of crash, the rumble strip was analyzed to be effective in the reduction of crash caused by "not keeping the safe distance", "sleeping", "negligence in keeping eyes forward", and "excessive handle operation". In particular, the rumble strip was analyzed and seen to be especially effective in preventing crash caused by "not keeping a safe distance," and "sleeping". The installation of the rumble strip was found to be effective in the prevention of crash caused by "not keeping the safe distance" and "sleeping". The results of this study may thus be used in deciding the causes of crash and the installation location of the tailored rumble strip that would be suitable for the geometric characteristics of the roads. This study will also be helpful in the establishment of future traffic safety measures.

• 대한토목학회논문집
• /
• 제30권3D호
• /
• pp.289-294
• /
• 2010

럽블스트립은 교통사고 감소에 기여를 하는 것으로 국내외 논문을 통해 잘 알려져 있다. 본 논문은 도로의 기하구조와 럼블스트립의 설치효과 관계에 대하여 교통사고 감소통계를 이용하여 분석하였다. 고속도로 구간에서 럼블스트립 설치전후의 교통사고 통계를 비교하였고 럼블스트립 설치지점의 평면선형, 종단선형, 설치길이와 비교하였다. 분석결과, 종단선형이 하향(-)인 구간에서 럼블스트립 설치효과가 높은 것으로 나타났다. 평면선형상에서 우곡선구간에서 효과적임을 알 수 있었다. 또한 설치길이 면에서 상대적으로 설치길이가 작아도 교통사고 감소의 유의성이 높은 것으로 나타났다.

• 한국도로학회논문집
• /
• 제9권4호
• /
• pp.65-74
• /
• 2007

노면요철포장은 1950년대 처음 설치된 후 사고감소효과에 대하여 여러 가지 연구가 있어왔다. 대부분의 연구에서 주로 졸음과 부주의 사고를 예방하는 것으로 알려져 있다. 본 논문에서는 고속도로 377개소에서 4년 동안 수집한 교통사고를 바탕으로 노면요철포장 설치 전 후에 사고감소원인과 환경을 분석하였다. 분석결과 노면요철포장 설치 전 후 교통사고를 비교할 때 -200건/2년(-32.3%) 감소하여, 노면요철포장 설치시 사고감소 효과가 있는 것으로 나타났다. 세부교통사고 원인분석결과 노면요철포장 설치효과가 유의하다고 할 수 있는 교통사고원인 항목을 제시할 수 있었다. 졸음, 과속, 주시태만, 부주의, 차량결함, 안전거리 미확보 교통사고감소가 유의하였다. A, B, C 등급 사고의 경우 교통사고감소가 유의하였다. 기상 상태 원인분석결과 맑음, 비, 흐림 기상상태에서 노면요철포장으로 인한 교통사고감소가 유의하였다. 본 논문 결과는 그동안 졸음 혹은 부주의 교통사고우려에 대응하도록 한 기존 노면요철포장 설치기준보다 원인인자를 명확히 하고 확장하여 고속도로 교통사고감소에 기여할 것으로 생각된다.

• 한국도로학회논문집
• /
• 제11권1호
• /
• pp.177-186
• /
• 2009

국내 도로의 주행안전성을 확보하기 위하여 2000년에 처음으로 노면요철 포장을 도입하였다. 본 공법의 효과가 증명되면서부터 시공물량은 매년 증가하였다. 본 연구진은 기존형태를 개선하여 본선 콘크리트 포장부 시공 시 동시에 노면요철 포장을 설치하는 형식을 제안하였다 노면요철 포장 시공장비를 제작하여 평택${\sim}$음성 고속국도에 시험시공을 하였으며 그 효과를 분석하였다. AASHTO에서 제안한 식을 이용하여 횡방향 정지거리를 산출한 결과, 개선된 노면요철 포장의 횡방향 여유 폭이 0.5m 더 확보되어 기존형태보다 더 안전한 것으로 나타났다. 소음도 평가결과, 노면요철 포장이 없는 구간을 주행할때보다 약 $3.5{\sim}9dB(A)$까지 더 크게 소음이 발생하여 졸음을 예방하거나 운전자의 환경을 개선시키는 것으로 나타났다. 진동평가에서는 주로 사람의 안구에 영향을 주는 주파수 영역대의 진동이 지배적인 것으로 나타났다. 주행 후 운전자들의 설문조사 결과에서는 개선된 형태가 기존형태보다 소음이나 진동에서 큰 차이는 없지만 주행상의 안정감이 더 큰 것으로 나타났다. 따라서 개선된 공법을 도로에 확대 적용할 경우, 기존보다 교통사고 및 사망자수를 줄일 수 있을 것으로 평가된다.

• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.201-206
• /
• 2012

PURPOSES: This study evaluated a measuring technique for tire-pavement interaction noise that uses a noble close proximity (NCPX) method as well as for noise level measured inside of a car (e.g., Inside Noise Level) in term of rumble strips constructed at a tall gate. METHODS: According to the measurements of NCPX and inside noise level (INL), 1/3 octave band frequency analysis and overall noise level calculation were conducted in order to evaluate noise levels of NCPX and INL, depending on types of rumble strips. RESULTS: The tested sections of general concrete pavement surface and two different types of rumble strips were evaluated, using 1/3 octave band frequency analysis and overall noise level. From the analyzed results, it can be concluded that rumble strips generate a relatively huge noise levels when compared to the concrete pavement surface. CONCLUSIONS: Noting that above 3 dBA different noise levels can let drivers know that they are getting close to toll gate; therefore, they should apply their brakes. Thus, the noise levels of rumble strips are required to be reduced, based on considering the neighbors living near toll gates.

• 한국도로학회논문집
• /
• 제15권6호
• /
• pp.33-39
• /
• 2013

PURPOSES : This research investigates traffic noise characteristics as change the transverse rumble strips shape from rectangular to cylinder at toll plaza of highway. METHODS : The traffic noise was investigated at two different places at toll plaza of highway. One is modified grooving, another is employed cylinder shape of TRS instead of rectangular shape of TRS. A measurement of traffic noise was conducted at same location and time period. The traffic volume information was gotten from office of highway office and vehicle speed was measured by speed measuring device. The traffic noise measurement was conducted from 13:00 to 23:00 and by pass-by method. Also, the traffic noise was measured behind noise barrier. Various distance from noise barrier(7.5m, 30m, 50m) and different heights(1.2m, 3m, and 5m) were parameter for measurement of traffic noise in this study. RESULTS : The class 1 vehicle was contributed from traffic volume which was increased 1,500. However, the distribution of traffic speed didn't change compare to previous investigated period. From this study, It was found that the external traffic noise was changed as function of geometric shape of TRS. The external noise from modified grooving was less than 1.2dB(A) of the current TRS. A difference of traffic noise was 20dB(A) before and after barrier. It came from a noise barrier effect as reduction of traffic noise. According to investigate a traffic noise distribution near barrier, there is similar noise characteristic as function of height at 7.5m distance from noise barrier. Also, There is no different traffic noise between 30m and 50m from source of the noise of sound barrier. CONCLUSIONS : Based on this traffic noise investigation result, there is a clear characteristic difference as changed TRS shape. The traffic noise was reduced by changed TRS shape. Specially, traffic noise was decreased although the traffic volume was increase for same investigation time and period. It is implied that cylinder type of TRS significantly reduces the traffic noise. The specification of various TRS will be studied in the future.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 2007년도 제57회 학술발표회논문집
• /
• pp.412-417
• /
• 2007