• 한국염색가공학회지
• /
• 제26권1호
• /
• pp.53-62
• /
• 2014

This study examined the dyeability, color fastness and functionality of cotton fabrics dyed with residual parts of cultivated Pteridium aquilinum. UV-Vis absorption spectrum, TLC and FT-IR spectra analysis showed that colorants of Pteridium aquilinum are a mixture of pyrogallol tannin and catechol tannin. Optimum dyeing conditions was confirmed colorant concentration of 500% at $100^{\circ}C$ for 60 minutes. Color fastness followed to washing, rubbing, perspiration and light as 4-5, 5, 4-5(acidic), 3-4(alkaline) and 2, respectively. Deodorization rates of ammonia($NH_3$) and acetic acid ($CH_3COOH$) were analyzed 88.8% and 78.0%. UV protection rate was 94.2% of UV-A and 96.8% of UV-B. UV protection factor(UPF) was 27. Therefore residual parts of cultivated Pteridium aquilinum could be used for a new functional colorant.

• 한국염색가공학회지
• /
• 제28권3호
• /
• pp.156-163
• /
• 2016

The 6 novel super hydrophobic bluish-green dyes, showing the maximum absorption at 600~650nm, were synthesized to dye polyolefin fibers such as polypropylene and high strength polyethylene fibers. Their absorption spectra appeared almost the same at visible range, which meant the length of alkyl substituents did not affect on color appearance of the dyes. The optimum length of alkyl group was determined as hexyl substituents from the practical point of view. From the dyeing results, the optimum dyeing condition was $130^{\circ}C$ for 1 hour. The good fastness ratings to washing, rubbing were obtained showing 4-5 for both fibers. Light fastness was obtained also good rating 4 for both fibers.

• 한국염색가공학회지
• /
• 제24권2호
• /
• pp.106-112
• /
• 2012

As a subsequent research of the previously reported$^{9)}$, a series of diaminoanthraquinoid blue dyes having hexyl, heptyl and octyl substituents were newly synthesized in order to investigate dyeability toward polypropylene fibers. As the length of alkyl groups introduced to the chromophore increased, the dyeability of the dyes toward polypropylene fibers also increased and then gradually decreased. From the result of dyeing, the hexyl-substituted dye showed the highest color strength and deep shade on pure polypropylene fibers. The good fastness rates to wash, rubbing and light were also obtained for all of the synthesized dyes.

• 한국염색가공학회지
• /
• 제23권1호
• /
• pp.21-27
• /
• 2011

The natural dyeing of cotton fabric with gardenia blue powder was studied. Cotton fabrics were treated with chitosan in order to increase K/S values and colorfastness. K/S values were increased with increasing the concentration of gardenia blue powder, dyeing time and temperature, and the lower pH of dye bath. In case of chitosan finishing, K/S values were increased, and ${\lambda}_{max}$ shifted to 600nm at 400nm. The wash fastness was improved, but the abrasion fastness was lowered in the case of wet rubbing.

• 한국염색가공학회지
• /
• 제32권3호
• /
• pp.128-134
• /
• 2020

Heat and flame protecting cloth is usually made of meta aramid fiber because of its own properties. But the high inter molecular hydrogen bonding and high Tg is the reason of the difficulty to dye meta aramid fiber. Recently, it was commercialized that the easily dyeable meta aramid fiber(AMD) for improving dyeability. In this study, the dyeing properties of AMD dyed with cationic dyes were investigated. The K/S values of AMD were 5~10% higher than these of general meta aramid fiber(AM) in the case of 1%owf caused by the lower crystallinity of AMD. The difference between K/S values of AMD and AM was increased as increasing dyeing concentration. The washing and rubbing fastness grade of AM and AMD were similar and good to very good.

• 한국염색가공학회지
• /
• 제15권3호
• /
• pp.168-175
• /
• 2003

Ultramicrofiber(UMF) PET knitted fabric and regular PET plain woven fabric as reference sample were impregnated with waterborne polyurethane(PU) in a two-step process with dyeing/PU treatment and PU treatment/dyeing to investigate the effect of the treatment sequence. The waterborne PU impregnated fabrics were dyed with two kinds of vat and disperse dyes to investigate the dyeing properties and the dyeing fastnesses. In vat dyeing the rank of color strength(K/S) was in order of dyeing/PU impregnation > dyeing only > PU impregnation/dyeing, whereas in case of disperse dyeing, the order was dyeing/PU impregnation > PU impregnation/dyeing >dyeing only. Wash fastness of vat dyeing showed a higher 2-3 grade than disperse dyeing, while rubbing and light fastnesses were not good for disperse dyes.

• 한국염색가공학회지
• /
• 제32권4호
• /
• pp.226-231
• /
• 2020

This study investigated effect of particle sizes of polymer binders for digital textile printing(DTP) pigment inks on touch of fabrics. The polymer binders were synthesized via miniemulsion polymerization of methyl methacrylate(MMA), butyl acrylate(BA), N-ethylolacrylamide(NEA) and methacrylic acid(MAA). The prepared binders were applied to black pigment inks and those black pigment inks were used to dye cotton fabrics. Then, color strength, rubbing fastness, stiffness, surface and bending properties of the dyed fabrics were investigated. Depending on the particle size of the polymer binder used, color strength, friction fastness, stiffness, surface and bending properties change. Generally, the larger the particle size of the polymer binder, the softer properties.

• 한국의류학회지
• /
• 제21권6호
• /
• pp.1051-1059
• /
• 1997

The objectives of this study were to investigate the effects of mordants and dyeing: on the dyeability and color fastness of the fabrics dyed with the extract from Turmeric. The following results were drawn from the data obtained. 1. The wavelengths of the strongest absorption band of Turmeric extract were 400 nm respectively and the wavelengths were 440 nm after the mordants were added in the color extract. The bands of Turmeric extract shifted to long wave length side as pH increased. In all cases, the abosorbancies were increased as pH increased. 2. The main color substance in extract from Turmeric were expected to be curcumin respectively by spectrophotometric and HPLC studies. 3. As to the concentration of color extract for dyeing, about 20 g/L was the optimum concentration to dye silk and cotton fabrics with extract. 4. The K/S values of dyed fabrics were increased gradually as the concentration of mordants increased, and the highest K/S values were obtained at 5∼10%. When using the mordanting methods, silk fabric by premordanting and cotton fabric by premordanting and synmordanting had influenced upon K/S valse. 5. The color fastness of fabrics dyed with Turmeric extract against dry cleaning, washing, rubbing and perspiration was improved 1 level or so but light fastness was remained.

• 한국생활과학회지
• /
• 제22권5호
• /
• pp.461-476
• /
• 2013

This study aims to provide practical information of both color and hands of cotton fabrics dyed with persimmon dye powder for natural dyeing fashion industries by investigating dyeing behavior and color gamut, by testing mechanical properties depending on color characteristics, and finally by evaluating dyeing fastness. As results, the persimmon dye powder obtained by extracting the fruits to final solid powder was found as containing tannin and it partially coated between and on fibers similarly to traditionally dyed one. The K/S values of non-mordanted fabric and two differently mordanted ones with Fe and Cu seemed to reach their equilibrium from 800, 800, and 600% (owf), respectively. Yellow-red was the only one hue shown while tones were various as pale (p), light grayish (ltg), soft (sf), dull (d), grayish (g), and dark grayish (dkg). In mechanical properties, the dyed fabrics with p and ltg tended to be less altered than undyed ones whereas d and d kg by higher bath concentrations could be applied to boxy silhouette owing to their increased stiffness and less stretchability. Although fastness to dry cleaning and stain was good, color change by washing and rubbing needed to be improved.

• 복식문화연구
• /
• 제24권5호
• /
• pp.577-587
• /
• 2016

Natural dye extracted from Salicornia bigelovii was applied to silk fabrics by dip dyeing process. The dyeing properties and the functionalities of the silk fabrics were determined. Factors affecting the dyeing properties such as dyestuff concentration, temperature, time and pH were studied. The colorimetric parameters $L^*$, $a^*$, $b^*$, and H, V/C values were measured to select the optimal mordanting conditions. The color-fastnesses of the dyed and mordanted fabrics were estimated for practical use; in addition, the antibacterial property, ultraviolet protection properties were evaluated. The dyeabilities of silk increased depending on the increasing dye concentration, dyeing time, and dyeing temperature. And optimum dyeing results were achieved when dyeing with 300% (o.w.f.) of dye concentration at $90^{\circ}C$ for 100 minutes and at pH 3. The dyed silk fabrics without mordants produced yellow (Y) color and showed yellow (Y) or green yellow (GY) colors depending on the mordants type. The light fastness of dyed and Al mordanted silk fabrics were found to be excellent, and the drycleaning and rubbing fastness were good. The dyed silk fabrics showed no antibacterial property, but Al and Cu mordanted silk fabrics showed 99.9% reduction rate. The ultraviolet protection properties of the dyed silk fabric was improved. And the ultraviolet protection properties of mordanted samples showed very good ultraviolet protection properties.