• Journal of the Korea Fashion and Costume Design Association
• /
• v.24 no.3
• /
• pp.63-71
• /
• 2022

This paper aims to compare and verify the antibacterial effects of cotton fabrics naturally dyed with extracts of Ulmus davidiana var. japonica Nakai, Caesalpinia sappan, Saururus chinensis, and Artemisia princeps against antibiotic-resistant strains of bacteria. After natural dyeing of the test fabric, Al, Cu, Fe mordants were used. The color fastness against washing, rubbing, and perspiration of the cotton fabrics dyed with the 4 types of extracts were mostly excellent. However, the color fastness against light showed poor results for all four types. As for the antibacterial test method, MRSA (ATCC 33591) was applied to the cotton fabrics dyed with the four kinds of extracts and cultured for 24 hours. After that, the bacteria that proliferated on the fabrics were collected and spread on a solid medium. The bacteria were measured to find out the bacteriostatic reduction rate for the antibiotic-resistant strains. As a result of the analysis, all four extracts showed a high bacteriostatic reduction rate of more than 99% when the copper mordant was used. Even with the lack of a mordant, the bacteriostatic reduction rate was high, at 99.9% for Caesalpinia sappan and 94.6% for Saururus chinensis.

• Textile Coloration and Finishing
• /
• v.35 no.2
• /
• pp.67-81
• /
• 2023

This study aims to examine the possibility of using dried Dondropanax morbiferus extract as a functional dye. The leaves and branches of were extracted with distilled water and 30% ethanol, and the dyeability and functionality of silk fabrics were examined according to the color characteristics of the extract and dyeing conditions. As a result of analyzing the ultraviolet and visible light absorption spectrum of the extract, it was possible to confirm the peak of flavonoid belonging to polyphenol, and the peak of riboflavin expressing yellow color was confirmed. Adsorption equilibrium was observed at 4% dyeing concentration and 60 minutes of dyeing time, and as the temperature increased, dyeing amount increased without color change of Y-series. Aluminum mordanting also increased the yellow color. The color fastness of washing and UV irradiation was low, but the color fastness of rubbing was evaluated as relatively good. The silk fabric dyed with the distilled water extract of the leaves showed a 99.9% bacteriostatic reduction against Staphylococcus aureus and Klebsiella pneumoniae, showing excellent antibacterial properties.

• Journal of the Korean Home Economics Association
• /
• v.42 no.6
• /
• pp.43-53
• /
• 2004

The purpose of this paper is to investigate the dyeability, antibacterial activity, and deodorization of cotton and silk fabrics dyed with extracted solution from Chrysanthemum boreale. The results are as follows： 1. The optimum conditions of dyeing temperature and time for the cotton fabrics were 90$^{\circ}C$ and 60minutes, while those of the silk fabrics were 60$^{\circ}C$ and 30 minutes respectively. 2. The K/S values of cotton fabrics were slightly higher than those of silk fabrics. The K/S values of both fabrics were slightly increased by mordanting with Cr but were decreased by mordanting with Cu and Fe 3. The colors of the cotton and silk fabrics changed from GY to Y. In both cases, the values of the fabric colors were lowered, and the values of the colors continued to be lowered with Cu and Fe. The chroma and color difference of both fabrics were high and were further increased by mordanting with Cu. 4. The fastness to dry-cleaning and rubbing of the cotton and silk fabrics was very good. The fastness to washing of both fabrics was good except when mordanted with Fe. The fastness to perspiration of both fabrics was fairly good, but the fastness to acid perspiration was poorer than that to the alkaline perspiration. The fastness to light of both fabrics was very poor. 5. The cotton and silk fabrics showed excellent antibacterial activity. Both fabrics mordanted with Cu showed perfect antibacterial activity. 6. The deodorization of the silk fabrics was very good, and that of the silk fabrics mordanted with Cu and Al was excellent, while the deodorization of the cotton fabrics was fairly good.

• The Research Journal of the Costume Culture
• /
• v.26 no.5
• /
• pp.754-763
• /
• 2018

This study examined the color reproducibility and color fastness of digital textile printing for nylon sublimation transfer. After measuring the temperature and time suited to nylon sublimation transfer, the researchers conducted various tests for comparison and analysis including polyester transfer paper on polyester fabric to check dyeing characteristics, color change, sharpness, and the rubbing fastness of the dyeing samples for nylon sublimation transfer. These tests produced the following results. At $185^{\circ}C$ and $187^{\circ}C$, the sublimation transfer dyeing characteristics of nylon were similar to those of polyester and the researchers even observed superior color development in some colors; at a low temperature of $180^{\circ}C$, the sample that was worked on had the lowest level of color development. The examination of color difference (${\Delta}E$), which compared $L^*a^*b^*$ values, showed that the ${\Delta}E$ value of magenta was 10.34, that of yellow was 24.70, and that of black was 15.28. These results highlight the important role of heat treatment temperature and time on color development in nylon sublimation transfer. Concerning sharpness, the samples subjected to higher temperature heat treatment exhibited fewer color spreading phenomena around lines. Thus, dyeing properties and fastness can be enhanced by elongating time at low temperatures and shortening time at high temperatures; however, considering production time constraints as well as the need to produce industrially marketable quantities, the findings of this study suggest that the heat treatment temperature most suitable for nylon sublimation transfer is $187^{\circ}C$ for a duration of 50 seconds.

• Fashion & Textile Research Journal
• /
• v.13 no.5
• /
• pp.778-789
• /
• 2011

The natural dyeing of silk fabrics with guava leaf extract was investigated. Mixed components of flavonoid and tannin seem to be the components of guava leaf extract. The temperature and time for dyeing of silk fabrics with guava leaf extract were $40^{\circ}C$ and $90^{\circ}C$ for eighty minutes, respectively. The dyeing equilibrium was shown at the fourth time of repeated dyeing. The highest K/S value was recorded at pH 3. Fe-mordanted fabrics showed the highest K/S value. High K/S values were shown in the post-mordanting of dyed fabrics at $40^{\circ}C$ and the pre-mordanting of dyed fabrics at $90^{\circ}C$. After repeated dyeing and mordanting, various color change occurred with mordant treatment. Surface colors were changed to YR color in alkaline water extract and to Y color in acidic water and ethanol extract, respectively. The washing fastness was level 3-4 for Sn-mordanted fabrics and level 4 for Fe-mordanted fabrics, and the dry cleaning fastness also showed very excellent result with level 4-5. The rubbing fastness was satisfactory with level 3-4. The light fastness was above level 4 only when Fe-mordanting was conducted, and the rest of dyed fabrics was not fast enough. In the antibacterial activity, the powder of guva leaf extract showed 99.9% of high antibacterial activity and Staphylococcus aureus showed 99.6% in dyed fabric. All dyed fabrics showed higher deodorization and UV protection rate than control fabric.

• Fashion & Textile Research Journal
• /
• v.16 no.3
• /
• pp.492-498
• /
• 2014

Lotus(Nelumbo nucifera gaertn) is intimate plant to many people that it has clean and noble characteristics despite growth in the mud. Especially Lotus seedpods, byproduct of lotus, are rich in oligometric procyanidins and could be a new source of procyanidins. Procyanidins, also known as condensed tannins, are a class of polyphenols. In other words lotus seedpod contains plenty of tannins. Commonly tannins colorants could increase adsorption and fastness properties in fabric dyeing. This study was made to investigate colorants characteristics of lotus seedpod and various colorfastness properties of dyed silk fabrics. The wavelength of maximum absorption of lotus seedpod solution appeared at 273.5 nm from UV-vis spectrophotometer. From the results of FT-IR spectra measurements, IR absorption band of lotus seedpod colorants appeared at $3415cm^{-1}$, $2900cm^{-1}$ and $1620cm^{-1}$ by tannin structure. And tannin ingredient contents was the highest at pH 9 and flavonoid at pH 11. Lotus seedpod colorants showed relatively good affinity at pH 3 on silk fabrics and optimum dyeing temperature and time for silk was for 50 min, at $80^{\circ}C$. K/s of Light fastness according to different washing method was the highest at process including ironing and ${\Delta}E$ was the lowest. All of fastness(Light rubbing laundering perspiration dry cleaning) showed excellent results over 4 or 4-5 grades.

• Fashion & Textile Research Journal
• /
• v.21 no.4
• /
• pp.509-514
• /
• 2019

Cotton fabrics were treated with gelatin to enhance dyeability and color strength when using Caesalpinia sappan dye. Gelatin was used as the protein and a pad-dry- cure method was used for the treatment process (2, 4, 6, 8, 10, 12, 14g/l concentration). Pretreated fabrics were mordanted with 10% alum. Fabrics were then dyed with freeze-dried sappan wood water extract powder form. Dyed samples were assessed in regards to dyeing behavior and color fastness. Comparing untreated and gelatin treated samples from the SEM images indicated that the Gelatin treatment (10g/l) resulted in an enhanced surface roughness that was relative to that of untreated cotton. Padding cotton with gelatin at 6g/l concentration afforded dyed fabrics with a 2 times increase in the K/S value over that of untreated fabrics. All dyed samples were red color with a significant enhancement in the sample color strength (K/S) being observed for pretreated samples. pH values favor dye absorption with pH 7 yielding the highest color strength. Dyeing at an elevated temperature resulted in a lower color strength and reddish-dull color. Longer dyeing times created greater color strengths for untreated and gelatin treated cotton. Increased dye concentrations resulted in higher K/S values for both gelatin treated and untreated cotton. As for color fastness, gelatin treated and untreated cotton fabrics dyed with sappan wood extract showed a relatively low rating in washing fastness (color change 1 rating), light fastness (1 rating), and rubbing fastness (wet:1-2, dry:3-4 rating).

• Journal of Fashion Business
• /
• v.15 no.5
• /
• pp.43-54
• /
• 2011

Digital Textile Printing(DTP) is appropriate for quick response system(QRS) and is closely connected with high value added fashion industry. Fashion products of high price are mainly silk and cotton. For high quality DTP products, it is important to optimize the parameters of media, pre and after-treatment, ink, printer, etc. DTP for these two fiber materials is also accompanied certainly with steaming as after-treatment process for coloration. Role of steam is like water in exhaustion dyeing. Steam can diffuse dye or ink in printing paste to fiber. Quality of DTP products depend on after-treatment processes such as steaming, washing, drying. Current production amount of DTP is smaller than one of conventional textile printing. However conventional after-treatment system has been using so far. This is mismatched with DTP in terms of process efficiency, spot work of small lot, quality control. In this study, continuous after-treatment system has been suitably designed for DTP that washing and drying are available after steaming. So, It is possible to improve efficiency of DTP process. Especially, the effects of after-treatment process, such as temperature of heat drum, steaming time on printability, color difference, color fastness were examined. Two types of samples(cotton knit and silk fabrics) were used. The results were obtained as follows : First, there is no a wide difference between the K/S values of cotton and silk treated with continuous after-treatment system and those of sample treated with conventional printing after-treatment method. So it is more effective to use the continuous after-treatment system than conventional printing after-treatment system in case of the daily throughput of 1,000 yards below. Second, after continuous after-treatment for DTP, K/S values were increased and lightness($L^*$) values were decreased. ${\Delta}E$ values were below 2.3. Third, DTP samples treated with continuous after-treatment system were tested for fastness(washing, light, rubbing). Grades of fastness(washing, light, rubbing) were above 3 grade.

• Fashion & Textile Research Journal
• /
• v.12 no.2
• /
• pp.224-232
• /
• 2010

The natural dyeing of fabrics with persimmon juice(astringent persimmon, sweet persimmon, astringent and sweet persimmon mix) was investigated. After dyeing of cotton and silk fabrics with persimmon juice, we evaluated the dyeability of persimmon juice, the observation of fabric surface with high magnification video microscope, physical properties and color fastness with the conditions of repeating times of dyeing and variables of mordants. The results obtained from this study were as follows: The fabrics dyed with astringent persimmon have shown the highest color difference, while the fabrics dyed with sweet persimmon and the fabrics dyed with astringent and sweet persimmon mix have shown similar color differences. With the increase of repeating times of dyeing, the brightness of fabric decreased. However, $a^*$ value increased gradually, so that it became dark brown color. The $a^*$ and $b^*$ values of dyed fabrics with Fe-mordant have dropped significantly, so that they have shown achromatic colors. But the fabrics treated with other mordants have shown yellowish brown colors. On the surface of the fabrics, threads were bonded together by the viscosity of persimmon juice. Regardless of the types of persimmon juice, stiffness was increased after dying, while crease resistance was decreased. The water repellency of silk fabrics were improved than cotton fabrics after dyeing with sweet persimmon juice, but in case of cotton, it hasn't changed. Washing fastness was improved with the EM(Effective Microorganism)-fermented liquid treatment, and rubbing fastness of two fabrics was better in dry condition than in wet condition.

• Fashion & Textile Research Journal
• /
• v.16 no.3
• /
• pp.476-484
• /
• 2014

The purpose of this study was to investigate the dyeing properties and anti-microbial ability of silk and wool fabrics dyed with Terminalia chebula Retzius(TCR) extract using two extraction solvent, hot water and methanol. Dyeing properties of fabrics were studied by investigating the characteristics of colorant, changes in dye uptake under different dyeing conditions, and by investigating color change when mordants were applied. Also, color fastness, and antimicrobial activity of dyed fabrics were estimated. Regardless of extraction solvent type, colorant showed maximum absorption wavelength at 280 nm and 578 nm, which implied that tannin was the major pigment component of TCR. Also, through FT-IR spectrum result, it was confirmed that tannin of TCR methanol extract was hydrolysable tannin. But for the hot water extract, it was only assumed that its tannin was condenced tannin. Fabric dyed with hot water solvent extract showed higher dye uptake than fabric dyed with methanol solvent extract, dye uptake increasing by higher concentration of the dye, longer dyeing time and higher dyeing temperature. And the absorption curve between TCR extract and protein fiber was shaped in the form of Langmuir adsorption isotherm. Fabric dyed without mordant was yellow in color, and when dyed with mordant, fabric showed various colors depending on mordant types except Sn. Color fastness to washing was generally fine and color fastness to light was moderate. But color fastness to rubbing and dry cleaning was outstanding. Lastly, dyed fabrics showed very good antimicrobial activity of 99.9% against Staphylococcus aureus and Kiebsiella pneumoniae.