• 한국소음진동공학회논문집
• /
• 제17권5호
• /
• pp.391-397
• /
• 2007

This paper presents active vibration control using a hybrid mount which consists of rubber element and the piezostack actuator. After identifying stiffness and damping properties of the rubber element and piezoelectric elements, a mechanical model of the hybrid mount is established. The mount model is then incorporated with the vibration system, and the governing equation of motion is obtained in a state space. A sliding mode controller and LQG controller are designed in order to actively attenuate the vibration of the system subjected to various frequencies and small magnitude excitations. Control responses such as acceleration and force transmission through the hybrid mount are evaluated by computer simulation.

• Computers and Concrete
• /
• 제25권3호
• /
• pp.267-272
• /
• 2020

This paper investigates the effect of crumb rubber (CR) on compressive behaviour of crumb rubber concrete filled steel tube (CRCFST) stub columns. Therefore, experiments on 16 stub columns subjected to axial loading are carried out. The results show that the failure modes of CRCFST stub columns with different CR replacement ratios and CR size are similar, manifested the buckling of the outer steel tube. The axial bearing capacity and stiffness both decrease with an increase in CR replacement ratio, and with decreasing CR size.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1578-1583
• /
• 2007

The suspension system of railway rolling-stock is composed of the primary and secondary suspension elements. Recently, a conical rubber spring is widely used as the primary suspension element due to the merits of the three directional stiffness characteristics. So, understanding the properties and characteristics of the conical rubber spring is very important from the viewpoint of vehicle stability and efficient maintenance. Thus, this study is started to acquire the basic data for maintaining spring elements efficiently. For this, we tested the conical rubber spring samples including a new and old specimen with aging. As a test result, we have obtained the property characteristics of the aged spring comparing with the new product and we describe the results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.742-748
• /
• 2003

As for marine propulsion shafting system using 4 stroke diesel engine, it is common to apply reduction gear box between diesel engine and shafting with a view of increasing mechanical efficiency, which inevitably require elastic coupling due to avoid chattering and hammering inside of gear box. In this study, optimum method of rectifying propulsion shafting system in case of 750ton fishing vessel specially in a view of torsional vibration, is theoretically studied. After exchange of diesel engine and gear box, analysis result of torsional vibration get worse and so some countermeasure are needed. The elastic coupling is modified from present block type rubber coupling showing relatively high torsional stiffness to rubber coupling with two series elements directly connected. The vibration measurement using two laser torsion meters was done during sea trial, whose results are compared to those of calculation and verified.

• 한국지진공학회논문집
• /
• 제20권5호
• /
• pp.311-318
• /
• 2016

The lead-rubber bearing (LRB) dissipates seismic energy through plastic deformation of lead core. Under large-displacement cyclic motion, the temperature increases in the lead core. The shear strength of a lead-rubber bearing is reduced due to the heating effect of the lead core. In this study, the seismic responses such as displacement increasing, shear strength and vertical stiffness degradations of LRB due to the heating effect are evaluated for design basis earthquake (DBE) and beyond design basis earthquake (150% DBE, 167% DBE, 200% DBE).

• Earthquakes and Structures
• /
• 제2권1호
• /
• pp.1-24
• /
• 2011

During very strong earthquakes, seismically isolated buildings may experience large horizontal relative displacements, which may lead to poundings if an insufficiently wide clearance is provided around the building. This paper investigates, through numerical simulations, the effectiveness of using rubber bumpers, which could be attached at locations where it is likely to have impacts, in order to act as shock-absorbers. For the simulation of the dynamic behavior of such rubber bumpers during impacts, a nonlinear force-based impact model, which takes into account the finite thickness of the rubber bumpers, has been developed. Subsequently, a series of parametric analyses are performed to assess the effect of the gap size, the earthquake characteristics and the thickness, compressive capacity and damping of the bumpers. The stiffness of the moat wall is also parametrically considered during poundings of a seismically isolated building, as another potential mitigation measure for poundings of seismically isolated buildings.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.124-131
• /
• 1999

The axle spring is used in primary suspension component of railway vehicles. The most important factor of axle spring is to have adequate spring constant for comfortable feeling of ride. The non-linear properties of rubber which were important parameter to evaluate of rubber components, were determined by the characteristic test. The finite element analysis of the axle spring are executed to predict the behavior of deformation and stiffness by using commercial FEA code.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.193-199
• /
• 2001

In this study, the carbody design of the rubber tired AGT(Automated Guide-way Transit System) under development by KRRI was numerically analysed to evaluate its structural strength according to the standard specifications for Korean LRT (Light Rail Transit). The numerical results showed that the detail design of the carbody was strong enough to satisfy the specifications with respect to the axial compression strength, the vertical strength and the vertical stiffness(natural frequency). However, the carbody design had some problems on the fatigue strength by twist loadings. So, it was recommended that the carbody design should be modified to improve the twisting strength by reinforcing the front end structures.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.662-665
• /
• 2004

In this paper, based on shaking table test results on a seismically isolated bridge model, an inelastic numerical model is refined by using Bouc-Wen model representing the hysteretic behavior of isolators. Seismic responses of isolated bridges are numerically investigated varying with relative stiffness ratios, which is a ratio of the effective stiffness of isolator to the lateral stiffness of bridge pier. From the results, it is found that an adequate range of relative stiffness ratio could be defined for seismic design of isolated bridges without considering the flexibility of piers.

• 한국산학기술학회논문지
• /
• 제13권3호
• /
• pp.967-976
• /
• 2012

본 논문은 자동차 환경규제에 따른 CO2 감소 및 연비향상을 위하여 Stop&Go 기능을 적용한 소형 승용차에 대한 파워트레인 마운트 (Powertrain Mount) 의 진동 소음 최적화 방향을 제시하였다. 이를 위해 현재 "A" 차량에 적용중인 파워트레인 마운트 시스템을 분석한 후 다구찌 기법을 활용하여 파워트레인 마운트에 적용된 고무 동특성에 대한 다양한 변수를 제시하였고, 고무의 동특성 변수에 의해 만들어진 테스트 제품을 AHP(Analytic Hierarchy Process)기법을 적용하여 Stop&Go 기능에 적합한 진동 소음의 최적화 정도를 검증하였다. 이와 같은 시스템을 파워트레인 마운트의 초기 디자인 검증에 적용함으로써, 파워트레인 마운트의 고무 동특성에 대한 엔지니어링 노하우 (Engineering Know-How) 없이도 엔진의 움직임으로 야기되는 진동 소음의 문제점을 파악하고 이를 효과적으로 제어하는데 큰 역할을 할 것으로 예상된다.