• Elastomers and Composites
• /
• v.50 no.2
• /
• pp.103-109
• /
• 2015

In this study, epoxy/anhydride mixing ratio for the highly silica filled compounds with chromium (III) octoate catalyst was investigated at a low curing temperature ($71^{\circ}C$ for 40 hr) by evaluating the compressive strength with the weight ratio ranges from 0.3/1.0 to 1.0/1.0 of epoxy part (Part A)/anhydride part (Part B). In case of epoxy/anhydride compounds used surface unmodified silica by coupling agent, these compounds need excess anhydride unlike the weight ratio in the conventional epoxy/anhydride compounds. In curing behavior, the epoxy/anhydride compounds containing chromium (III) octoate showed high conversions at $71^{\circ}C$ for 40 hr, even if a dipropylene glycol (DPG) was not used as a polymerization initiator. Also, DPG leads to a poor epoxy network structure. In conclusion, the appropriate weight ratio of Part A/Part B of highly silica filled epoxy/anhydride compounds with chromium (III) octoate catalyst is 0.5/1.0 and the maximum amounts of silica is 1470 phr of epoxy resin.

• Elastomers and Composites
• /
• v.48 no.2
• /
• pp.125-132
• /
• 2013

In this work, we have discussed new engineering systems for preparing carbon master batch composed by carbon black and various organic compounds. In general, polymer resin, which applied for automobile tire, household items, and various industry items, is used with the fillers including carbon black and silica to control the color or properties. Domestic part and material industry has been remarkably developed in that the development of materials including the compounding of raw materials. Meanwhile, the engineering technique for mass production has not reached to a requirement of industry due to slow technique development and high dependence on foreign. Thus, we will focus on the introduction of new engineering technique developed by domestic company for preparing carbon master batch.

• Elastomers and Composites
• /
• v.47 no.3
• /
• pp.210-215
• /
• 2012

Whitening phenomena of the EPDM composites with different inorganic filler compositions which were aged at $90^{\circ}C$ for 7 days in air and tap water atmospheres, respectively, were investigated. The aged samples in tap water containing stearic acid exhibited severe whitening phenomena, while all the samples aged in air did not show any whitening. Depending on the filler compositions, there was no big difference in the whitening phenomena. The whitening materials were analyzed using gas chromatography/mass spectrometry (GC/MS), image analysis, energy-dispersive X-ray spectroscopy (EDX), and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR). The whitening materials were identified to be salts of stearic acid. The salts of stearic acid were formed by reaction of metal cation in tap water and stearic acid in the sample.

• Elastomers and Composites
• /
• v.44 no.4
• /
• pp.408-415
• /
• 2009

Iron-loaded activated carbon fibers (Fe-ACF) supported titanium dioxide ($TiO_2$) photocatalyst (Fe-ACF/$TiO_2$) was synthesized using a sol-gel method. Three different types of Fe-ACF/$TiO_2$ were obtained by treatment with different precursor of Fe, and characterized using BET, SEM, XRD and EDX analysis. The photocatalytic activity of Fe-ACF/$TiO_2$ was investigated by the degradation of Rhodamine B (Rh.B) solution under UV irradiation. From the experimental results, it was revealed that Fe-ACF/$TiO_2$ composites show considerable photocatalytic ability for the removal of Rh.B by comparing non-treated ACF/$TiO_2$ composites. And photo-Fenton reaction with Fe element was incoordinately influenced due to different precursor of Fe. It clearly indicates that Fe-ACF/$TiO_2$ composites prepared using $FeCl_3$ provided the highest photo-Fenton activity, then, which was affected by pH changes on the degradation of Rh.B.

• Elastomers and Composites
• /
• v.40 no.3
• /
• pp.196-203
• /
• 2005

In this work, the engine oil resistant evaluation and breakdown analysis of room temperature vulcanizing silicone adhesives were performed through the surface properties, thermal stabilities, adhesive strength, and morphology measurements. As a result, the permeation of engine oil into adhesive specimens was carried out from surface to center in the specimens. And the oil content in the adhesive specimens was increased and the Si-O-Si bond of the adhesives was decomposed with increasing the aging time. The TGA results indicated that the thermal degradation was mainly occurred at under and surfaces of the specimens. The tensile strength, elongation, and adhesive strength of the adhesives were significantly decreased after the engine oil resistant tests, which could be attributed to the initial lose of adhesive properties resulting from the engine oil absorption and thermal aging. And the failure mode of the adhesive specimens was changed from cohesive failure to interfacial failure.

• Elastomers and Composites
• /
• v.46 no.3
• /
• pp.204-210
• /
• 2011

In this study, Jute fibers reinforced polypropylene (JFRP) composites were manufactured by injection molding technique. In order to improve the affinity and adhesion between fibers and thermoplastic matrices during manufacturing, Maleic anhydride (MA) as a coupling agent have been employed. Untreated and treated surfaces of jute fibers were characterized using SEM and Fourier transform infrared (FTIR). Physical properties like water absorption rate were studied. Tensile and flexural tests were carried out to evaluate the composite mechanical properties. Tensile test and bending test indicated that JFRP composites show higher strength and modulus than pure PP. In addition, strength and modulus were found to be influenced by the variation of MAPP content (1%, 2%, and 3%). Tensile fracture surfaces were examined using scanning electron microscope. It ensures better interfacial adhesion between fibers and matrix by increasing the percentage of MAPP.

• Elastomers and Composites
• /
• v.47 no.3
• /
• pp.231-237
• /
• 2012

This study measured the mechanical and damping properties of EPDM compounds including fillers. Semi-reinforcing furnace black (SRF), high abrasion furnace black (HAF) and acetylene black were used as fillers. Dicumyl peroxide (DCP) were used as curing agents. The measurements were conducted using a moving die rheometer (MDR), durometer, universal testing machine (UTM), compression set and dynamic mechanical analysis (DMA). The tensile strength and elongation at break increased with increasing SRF contents in EPDM compounds. However, they decreased with increasing the amount of acetylene black. In the inspecting temperature range, EPDM compound filled acetylene black had stable storage modulus. Furthermore, the tan ${\delta}$ of the EPDM compounds obtained was enhanced by compounding with acetylene black.

• Journal of Environmental Health Sciences
• /
• v.43 no.5
• /
• pp.360-369
• /
• 2017

Objectives: The organizational culture of small-scale enterprises is influenced by a lack of awareness of industrial accidents and a business-oriented culture. Therefore, the purpose of this study is to establish a correlation between chemical awareness and worker safety, which is the reason why a company's safety environment is responsible for human factor accidents. Methods: The research model established the organizational culture, human relationships, organizational relationships, workplace culture, safety climate, and safety parameters, all of which affect the perception of chemical substances, then established safety rankings, communication, safety regulations, and safety support. Results: In order to derive the results of this study, the satisfaction level was mostly derived from the degree of engagement (+) depending on the number of years worked, in the hierarchical regression analysis. During work with chemicals, the number of years spent on the level of the service was determined by the influence of the chemical (-). Based on this company, the occurrence of chemical accidents caused by chemical materials was felt to be felt at the risk of causing the hazard to be felt, the absence of physical damage was excluded from the variables. The other variables detected in the variables were $62.8{\pm}24.4$. Conclusion: As a result, it is necessary to develop a statistical model for the verification of the hierarchical regression analysis, and the relationship between safety and awareness of the dangers of chemicals and biological agents requires periodic safety training. Job satisfaction was found to be higher if the level of awareness was sufficient.

• Elastomers and Composites
• /
• v.36 no.2
• /
• pp.94-101
• /
• 2001

In this work, the effect of NE plasma treatment generated by radio-frequency was investigated in acid-base surface values, ion adsorption characteristics, and surface free energies of carbon blacks. As the results, it was clearly found that the obvious improvement of the treatment is in the London dispersive component (${\gamma}s^L$) of surface free energy of carbon blacks. Also both electron-acceptor ( ${\gamma}s^+$) and -donor (${\gamma}s^-$) parameters for the specific component (${\gamma}s^{sp}$) were also increased with increasing the treatment time, resulting in increasing the surface functional groups of the carbon blacks studied, together with a consequence of the increases of acidic and basic surface functional groups, ion exchange, zeta potential, and ion mobility.

• Elastomers and Composites
• /
• v.34 no.2
• /
• pp.113-120
• /
• 1999

Nobody doubts to say that one of the most important performance polymers is a conductive polymer. The manufacturing process of the commercial conductive polymers has been known by mixing with the conductive materials, but it doesn't noticeably appear of a conductive function. One of the reasons is the lack of comprehension In compounding a carbon black with polymer rosins. This paper involves the understanding of compounding technology of the conductive carbon black filled composite. Our experimental results indicate that the fibrous shaped carbon black was hard to process but appeared of a superior conductivity compared to a stick or a sphelulite shaped carbon black. Therefore, it was processed with a processing oil in compounding, which led to a better processability and a better conductivity. This study was accomplished that the solution process compared to the melting process.