• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.5
• /
• pp.889-896
• /
• 2007

Advances in wireless networking, micro-fabrication and integration, and embedded microprocessors have enabled a new generation of massive-scale sensor networks. Because each sensor node is limited in size and capacity, it is very important to design a new simple and energy efficient protocol. Among conventional sensor networks' routing protocols, the directed diffusion scheme is widely blown because of its simplicity. This scheme, however, has a defect in that sending interest and exploratory data messages while setting connection paths consumes much energy because of its flooding scheme. Therefore, this paper proposes a new sensor network routing protocol, called sequenced directed diffusion with a threshold control, which compromises the conventional directed diffusion scheme's defect and offers an energy efficient routing idea. With a computer simulation, its performance is evaluated and compared to the conventional directed diffusion scheme. Numerical results show that the proposed scheme offers energy efficiency while routing packets, and resolves ill-balanced energy consumption among sensor nodes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.12
• /
• pp.5744-5764
• /
• 2018

In Wireless Sensor Networks (WSNs) for Internet of Things (IoT) environment, fault tolerance is a most fundamental issue due to strict energy constraint of sensor node. In this paper, a robust energy saving data dissemination protocol for IoT-WSNs is proposed. Minimized energy consumption and dissemination delay time based on signal strength play an important role in our scheme. The representative dissemination protocol SPIN (Sensor Protocols for Information via Negotiation) overcomes overlapped data problem of the classical Flooding scheme. However, SPIN never considers distance between nodes, thus the issue of dissemination energy consumption is becoming more important problem. In order to minimize the energy consumption, the shortest path between sensors should be considered to disseminate the data through the entire IoT-WSNs. SPMS (Shortest Path Mined SPIN) scheme creates routing tables using Bellman Ford method and forwards data through a multi-hop manner to optimize power consumption and delay time. Due to these properties, it is very hard to avoid heavy traffic when routing information is updated. Additionally, a node failure of SPMS would be caused by frequently using some sensors on the shortest path, thus network lifetime might be shortened quickly. In contrast, our scheme is resilient to these failures because it employs energy aware concept. The dissemination delay time of the proposed protocol without a routing table is similar to that of shortest path-based SPMS. In addition, our protocol does not require routing table, which needs a lot of control packets, thus it prevents excessive control message generation. Finally, the proposed scheme outperforms previous schemes in terms of data transmission success ratio, therefore our protocol could be appropriate for IoT-WSNs environment.

• Journal of Korea Multimedia Society
• /
• v.12 no.11
• /
• pp.1593-1608
• /
• 2009

If a certain relay node in multi-hop wireless networks might become a malicious node that does not cooperate with other nodes or a selfish node, network throughput will be dramatically decreased. Most of existing ad hoc routing protocols assuming that the nodes will fully cooperate with other nodes do not resolve the problem of network performance degradation due to malicious and selfish nodes. This paper presents the CARE (Cooperative Ad hoc routing protocol based REputation) scheme incorporating the reputation management that can achieve a multi-hop wireless network with high throughput performance. The proposed scheme provides the horizontal cross-layer approach which can identify misbehaving malicious, selfish nodes dropped out of the hop-by-hop based packet processing in the network and then set up an optimal packet routing path that will detour misbehaving nodes. And the vertical cross-layer approach contained in the CARE scheme attempts to improve the quality of routing paths by exploiting the quality of link information received from the MAC layer. Besides, it provides high TCP throughput by exploiting the reputation values of nodes acquired from the network layer into the transport layer. A case study on experiments and simulations shows that the CARE scheme incorporating vertical and horizontal cross-layer approaches yields better performance in terms of the low rate of packet loss, fast average packet delivery time, and high TCP throughput between end-to-end nodes.

• Journal of KIISE:Information Networking
• /
• v.29 no.1
• /
• pp.65-76
• /
• 2002

QoS routing is a routing technique for finding feasible path that satisfies QoS requirements required by application programs. Since QoS routing determines such paths in terms of dynamic network state, it satisfies the requirement of applications and increases the utilization of the network. The overhead is, however, generated by routers to exchange the information of the dynamic state of network. In order to reduce this protocol overhead, a timer based update mechanism is proposed in which router checks the change of the network status periodically and network state information is exchanged if the change is greater than a certain value. Using large update period makes, though, routing performance irresponsive to the parameters which determine the update of the network state of the router. In addition to this, large update period may result in inaccurate network state information at routers and cause resource reservation failure. The resource reservation failure generates additional overhead to cancel the resource reservation of the part of the path. In this paper, we propose mechanisms enhancing the existing network state update policy with respect to these two problems. Performance of the proposed schemes are evaluated through a course of simulation.

• Journal of Computing Science and Engineering
• /
• v.11 no.2
• /
• pp.49-57
• /
• 2017

This paper proposes a new IPv6 networking paradigm as a counter answer to the rationale for locator/identifier separation. Instead of involving separate number spaces each for node identifiers and locators, the context of the IP address as a node identifier alone is utilized and no additional locators are incorporated. That is, there are only node addresses and no locators, and location information is indirectly derived from neighbor relations between nodes. In order to accomplish this, no subnet IDs are utilized; the ID value is set to zero for all subnets. The paper details how to construct this paradigm through novel choice of operational policies in various IPv6 protocols and some trivial modifications. Especially, inherent provision of intra-domain node- as well as subnet-mobility by use of standard link-state intra-domain routing protocols is discussed. A number of important advantages of this paradigm over the canonical IPv6 networking and various known solutions of locator/identifier separation are discussed. Tailoring for multi-area domains and IPv4 is left for further study.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.119-125
• /
• 2007

On account of limited resources and diverse topology change. it is difficult to manage MANET and guarantee QoS. In current MANET, QoS grantee is exceedingly significant. However, today's MANET are being concentrately worked on MAC protocols and routing protocols. Thus we proposed a framework for effective management of MANET and supporting QoS using policy based network management paradigm and active network technology. Since this framework employs the policy-based management approach in active network environment, it provides an abstract and autonomous management method to network managers.

• Journal of Internet Computing and Services
• /
• v.8 no.4
• /
• pp.81-91
• /
• 2007

Binding update for the routing optimization in MIPv6 can make the involved nodes vulnerable to various attacks. Therefore, secure binding update becomes an important research issue in MIPv6, and several protocols have been proposed for this purpose. In this paper, we compare several existing binding update protocols such as RR, SUCV and OMIPv6 and analyze the vulnerability of nodes to the possible attacks and drawbacks of address management and scalability and overhead of encryption operations. Then, we suggest the design requirements for the secure binding update and propose an advanced protocol based on the design principle. Through the analysis, we show that our protocol can achieve a higher level of security against the various attacks and enable better management of address, provide the location privacy and reduce the computational overhead of mobile nodes with constraint computational power.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.12
• /
• pp.5928-5947
• /
• 2019

Multicast Mesh based Mobile Ad-hoc NETworks (MANETs) provide efficient data transmission in energy restraint areas without a fixed infrastructure. In this paper, the authors present an improved version of protocol SLIMMER developed by them earlier, and name it SLIMMER-SN. Most mesh-based protocols suffer from redundancy; however, the proposed protocol controls redundancy through the concept of forwarding nodes. The proposed protocol uses remaining energy of a node to decide its energy efficiency. For measuring stability, a new metric called Stability of Node (SN) has been introduced which depends on transmission range, node density and node velocity. For data transfer, a weighted cost function selects the most energy efficient nodes / most stable nodes or a weighted combination of both. This makes the node selection criteria more dynamic. The protocol works in two steps: (1) calculating SN and (2) using SN value in the weighted cost function for selection of nodes. The study compared the proposed protocol, with other mesh-based protocols PUMA and SLIMMER, based on packet delivery ratio (PDR), throughput, end-to-end delay and average energy consumption under different simulation conditions. Results clearly demonstrate that SLIMMER-SN outperformed both PUMA and SLIMMER.

• 한국정보컨버전스학회:학술대회논문집
• /
• 2008.06a
• /
• pp.199-204
• /
• 2008

Sensor nodes have various energy and computational constraints because of their inexpensive nature and ad-hoc method of deployment. Considerable research has been focused at overcoming these deficiencies through faster media accessing, more energy efficient routing, localization algorithms and system design. Our research attempts to provide a method of improvement MAC performance in these issues. We show that traditional carrier-sense multiple access(CSMA) protocols like IEEE 802.11 do not handle the first constraint adequately, and do not take advantage of the second property, leading to degraded latency and throughput as the network scales in size, We present more efficient method of a medium access for real-time wireless sensor networks. Proposed MAC protocol is a randomized CSMA protocol, but unlike previous legacy protocols, does not use a time-varying contention window from which a node randomly picks a transmission slot. To reduce the latency for the delivery of event reports, it carefully decides a fixed-size contention window, non-uniform probability distribution of transmitting in each slot within the window. We show that it can offer up to several times latency reduction compared to legacy of IEEE 802.11 as the size of the sensor network scales up to 256 nodes using widely used simulator ns-2. We, finally show that proposed MAC scheme comes close to meeting bounds on the best latency achievable by a decentralized CSMA-based MAC protocol for real-time wireless sensor networks which is sensitive to latency.

• The KIPS Transactions:PartC
• /
• v.15C no.1
• /
• pp.51-60
• /
• 2008

Micro-mobility protocols have been developed to reduce the control message overhead due to movements of mobile nodes. With the spread of mobile devices, services using mobile nodes are increasing and multicast services are becoming more important in providing multimedia services. In this paper we propose a new multicast protocol suitable for micro-mobility environments. The proposed protocol is designed to maintain optimal multicast routing paths and continue to provide multicast services without disruption in spite of frequent handoffs due to movements of mobile nodes. We used simulation to evaluate the proposed protocol, compared its performance with existing multicast protocols for mobile environments including bi-directional tunneling, remote subscription, and MMA, and observed that the proposed protocol exhibited better performance in terms of transmission success ratio and overhead on the network.