• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.596-604
• /
• 2020

Previous studies on pipe auto-routing algorithms generally used such algorithms as A*, Dijkstra, Genetic Algorithm, Particle Swarm Optimization, and Ant Colony Optimization, to satisfy the relevant constraints of its own field and improve the output quality. On the other hand, this study aimed to significantly improve path-finding speed by applying the Jump Point Search (JPS) algorithm, which requires lower search cost than the abovementioned algorithms, for pipe routing. The existing JPS, however, is limited to two-dimensional spaces and can only find the shortest path. Thus, it requires several improvements to be applied to pipe routing. Pipe routing is performed in a three-dimensional space, and the path of piping must be parallel to the axis to minimize its interference with other facilities. In addition, the number of elbows must be reduced to the maximum from an economic perspective, and preferred spaces in the path must also be included. The existing JPS was improved for the pipe routing problem such that it can consider the above-mentioned problem. The fast path-finding speed of the proposed algorithm was verified by comparing it with the conventional A* algorithm in terms of resolution.

• 한국CDE학회논문집
• /
• 제10권1호
• /
• pp.40-48
• /
• 2005

A hydraulic hose is an important part of the hydraulic system which transmits power using pressurized fluids. It allows relative motion between components at each end of the hose assembly, and it is much easier to route a hose assembly than it is to bend and install a rigid tubing assembly. Unnecessary loads, which drop the hose's pressure capability and shorten service life, depend on a hose-routing. Therefore, the Hydraulic system designers must be aware to consider unnecessary load does not affect the here. For this consideration in an early stage of the design process, CAD system must support the hose assembly routing design function which is to generate routing path and design fitting angle properly. This paper proposes 2 methods. One is to generate curves that are similar to routing paths of the real hose assembly using the energy minimization method and the optimization method. The other is to design fitting angles that are important design elements of a hose assembly using the Parallel Transport Frame. To implement the proposed methods above, commercial CAD software, CATIA has been integrated with our program.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.772-776
• /
• 2004

This paper proposes an interference avoidance approach for Constraint-Based Routing (CBR) algorithm in the Multi-Protocol Label Switching (MPLS) network. The MPLS network itself has a capability of integrating among any layer-3 protocols and any layer-2 protocols of the OSI model. It is based on the label switching technology, which is fast and flexible switching technique using pre-defined Label Switching Paths (LSPs). The MPLS network is a solution for the Traffic Engineering(TE), Quality of Service (QoS), Virtual Private Network (VPN), and Constraint-Based Routing (CBR) issues. According to the MPLS CBR, routing performance requirements are capability for on-line routing, high network throughput, high network utilization, high network scalability, fast rerouting performance, low percentage of call-setup request blocking, and low calculation complexity. There are many previously proposed algorithms such as minimum hop (MH) algorithm, widest shortest path (WSP) algorithm, and minimum interference routing algorithm (MIRA). The MIRA algorithm is currently seemed to be the best solution for the MPLS routing problem in case of selecting a path with minimum interference level. It achieves lower call-setup request blocking, lower interference level, higher network utilization and higher network throughput. However, it suffers from routing calculation complexity which makes it difficult to real task implementation. In this paper, there are three objectives for routing algorithm design, which are minimizing interference levels with other source-destination node pairs, minimizing resource usage by selecting a minimum hop path first, and reducing calculation complexity. The proposed CBR algorithm is based on power factor calculation of total amount of possible path per link and the residual bandwidth in the network. A path with high power factor should be considered as minimum interference path and should be selected for path setup. With the proposed algorithm, all of the three objectives are attained and the approach of selection of a high power factor path could minimize interference level among all source-destination node pairs. The approach of selection of a shortest path from many equal power factor paths approach could minimize the usage of network resource. Then the network has higher resource reservation for future call-setup request. Moreover, the calculation of possible path per link (or interference level indicator) is run only whenever the network topology has been changed. Hence, this approach could reduce routing calculation complexity. The simulation results show that the proposed algorithm has good performance over high network utilization, low call-setup blocking percentage and low routing computation complexity.

• 융합신호처리학회논문지
• /
• 제3권2호
• /
• pp.89-95
• /
• 2002

글로벌 라우팅(global routing)은 VLSI 설계 과정중의 하나로, 네트리스트의 모든 네트들을 연결하기 위하여 각 네트들을 라우팅 영역(routing area)에 할당시키는 문제이며, 글로벌 라우팅에서 최적의 해를 얻기 위해 maze routing 알고리즘, line-probe 알고리즘, shortest path 기반 알고리즘, Steiner tree 기반 알고리즘등이 이용된다. 본 논문에서는 라우팅 그래프에서 최단 경로 Steiner tree 탐색방법인 weighted network heuristic(WNH)과 이를 기반으로 하는 글로벌 라우팅 유전자 알고리즘(genetic algorithm; GA)을 제안하였으며, 제안한 방식을 시뮬레이티드 어닐링(SA) 방식과 비교, 분석하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.257-260
• /
• 2001

Routing region modeling methods for PCB auto-routing system in Shape based type(non-grid method) used region process type and the shape located in memory as a individual element, and this element consumed small memory due to unique data size. In this paper we design PCB(Printed Circuit Board) auto-routing system using the auction algorithm method that 1) Could be reached by solving the shortest path from single original point to various destination, and 2) Shaped based type without any memory dissipation with the best speed. Also, the auto-routing system developed by Visual C++ in Window environment, and can be used in IBM Pentium computer or in various individual PC system.

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.326-332
• /
• 2020

본 논문은 듀티사이클 기반의 무선센서네트워크에서 에너지 효율성을 높이고 시간 지연을 줄일 수 있는 경로설정을 위해 새로운 라우팅 메트릭을 고안하고 이를 활용한 라우팅 프로토콜을 제안한다. 듀티사이클을 고려한 새로운 라우팅 메트릭인 EDW 메트릭을 사용함으로써 에너지 효율적이며 저지연의 경로를 설정할 수 있다. 본 논문에서는 새로운 라우팅 메트릭을 적용하는 크로스레이어 기반의 다중경로 라우팅 프로토콜을 제안하고 실험을 통해 낮은 전송 지연시간과 적은 에너지소비를 확인하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.65-69
• /
• 2001

네트웍 관리는 메일, 화상회의, 웹, 데이터베이스 소프트웨어 등이 작동하는 네트웍 환경에서 더욱 중요한 문제가 되고 있다. 데이터를 전송하는 브리지 또는 라우터가 네트웍 디자인의 관점에서 비효율적인 패스로 전송할 수 있다. 이 논문에서는 네트워크상에서 발생할 수 있는 우회 경로 패스를 발견하는 문제를 논의한다. SNMP MIB로부터의 정보를 사용하여 계층적 네트웍 구조 분석을 기반으로 우회경로 패스를 발견하는 새로운 알고리즘을 제시한다. 제안된 알고리즘을 증명하기 위해 미리 선언된 데이터를 가지고 시뮬레이션 한 결과 우회 경로를 발견함을 알 수 있다.

• 스마트미디어저널
• /
• 제11권9호
• /
• pp.39-46
• /
• 2022

The WK-recursive network proposed by Vecchia and Sanges[1] is widely used in the design and implementation of local area networks and parallel processing architectures. It provides a high degree of regularity and scalability, which conform well to a design and realization of distributed systems involving a large number of computing elements. In this paper, the routing of a message is investigated on the WK-recursive network, which is key to the performance of this network. We present an efficient shortest path algorithm on the WK-recursive network, which is simpler than Chen and Duh[2] in terms of design complexity.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.702-704
• /
• 2010

무선 LAN(Local Area Network) 환경에서 QoS를 지원하기 위해 IEEE 802.11 Working Group은 IEEE 802.11e를 표준화하였다. IEEE 802.11e EDCA는 우선순위가 높은 트래픽의 채널 접근 기회를 확률적으로 높임으로써 QoS를 지원한다. 이는 우선순위가 높은 트래픽이 우선순위가 낮은 트래픽에 비해 채널 접근을 반드시 먼저 하는 것이 아니다. 따라서 모든 트래픽이 같은 채널, 같은 routing path를 가진다면, 우선순위가 낮은 트래픽은 우선순위가 높은 트래픽의 성능에 지속적인 영향을 미친다. 결과적으로 EDCA는 음성이나 비디오와 같은 멀티미디어 응용에 QoS를 보장하기에 무리가 따른다. 본 논문에서는 이러한 문제점을 해결하기 위해 Multi-Interface를 이용한 Multi-Path Routing Algorithm을 제안한다. 각 Interface 마다 IEEE 802.11e EDCA에서 사용하는 Access Category별로 각각의 Routing Path를 다르게 함으로써 높은 우선순위의 트래픽에 QoS를 보장한다.

• Journal of information and communication convergence engineering
• /
• 제6권2호
• /
• pp.117-121
• /
• 2008

In ad hoc network, the scarce energy management of the mobile devices has become a critical issue in order to extend the network lifetime. Therefore, the energy consumption is important in the routing design, otherwise cluster schemes are efficient in energy conserving. For the above reasons, an Energy conserving Context aware Clustering algorithm (ECC) is proposed to establish the network clustering structure, and a routing algorithm is introduced to choose the Optimal Energy Routing Protocol (OERP) path in this paper. Because in ad hoc network, the topology, nodes residual energy and energy consuming rate are dynamic changing. The network system should react continuously and rapidly to the changing conditions, and make corresponding action according different conditions. So we use the context aware computing to actualize the cluster head node, the routing path choosing. In this paper, we consider a novel routing protocol using the cluster schemes to find the optimal energy routing path based on a special topology structure of Resilient Ontology Multicasting Routing Protocol (RODMRP). The RODMRP is one of the hierarchical ad hoc network structure which combines the advantage of the tree based and the mesh based network. This scheme divides the nodes in different level found on the node energy condition, and the clustering is established based on the levels. This protocol considered the residual energy of the nodes and the total consuming energy ratio on the routing path to get the energy efficiently routing. The proposed networks scheme could get better improve the awareness for data to achieve and performance on their clustering establishment and messages transmission. Also, by using the context aware computing, according to the condition and the rules defined, the sensor nodes could adjust their behaviors correspondingly to improve the network routing.