• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9B
• /
• pp.795-801
• /
• 2008

Wireless Mesh Networks (WMNs) are popular due to their low cost and rapid deployment. Currently, many WMN researchers often considers the use of ad-hoc routing protocols because WMNs are similar to the ad-hoc networks. Some of currently deployed WMNs consider to use on-demand routing protocols such as Ad-hoc On-demand Distance Vector (AODV) and Dynamic Source Routing (DSR). But, AODV are not appropriate for Wireless Mesh Networks (WMNs), because flooding-based route discovery is both redundant and expensive in terms of control message overhead. In this paper, we propose a directional AODV (D-AODV) routing protocol based on hop count to a gateway. We implement the D-AODV routing protocol and evaluate the performance of the D-AODV on the testbed. The measurement results show that the D-AODV can enhance the network throughput by reducing the routing overhead.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.6 s.336
• /
• pp.23-32
• /
• 2005

This paper proposes a new algorithm for the energy constraint ad-hoc network which efficiently spread the energy usage over the network through the backup route scheme in order to increase the network lifetime. Recently, the various energy-efficient routing algorithms based on On-demanding method are proposed. Among them, PSR(Power-aware Source Routing) increased the network lifetime through the periodical route alternation depended on the use of the battery while DSR(Dynamice Source Routing) uses only the route selected during the route discovery phase. But PSR has a problem that it increases the route overhead because of the frequent flooding for the route alternation. For solving this problem, we propose HPSR(Hierarchical Power-aware Source Routing) which uses the backup route set during the route discovery in order to alternation the route without the flooding. HPSR increases the network lifetime due to the frequent route alternation using backup route while it decreases the routing overhead due to the reduced flooding. In this paper, we also prove the performance of HPSR through the simulation using OPNET.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.6
• /
• pp.1063-1079
• /
• 2010

Vehicle ad hoc networks (VANET) are one of the most important technologies to provide various ITS services. While VANET requires rapid and reliable transmission, packet transmission in VANET is unstable because of high mobility. Many routing protocols have been proposed and assessed to improve the efficiency of VANET. However, topology-based routing protocols generate heavy overhead and long delay, and position-based routing protocols have frequent packet loss due to inaccurate node position. In this paper, we propose a position-based routing repair algorithm to improve the efficiency of VANET. This algorithm is proposed based on the premise that AODV (-PGB) can be used effectively in VANET, if the discovery, maintenance and repair mechanism of AODV is optimized for the features of VANET. The main focus of this algorithm is that the relay node can determine whether its alternative node exits and judge whether the routing path is disconnected. If the relay node is about to swerve from the routing path in a multi-hop network, the node recognizes the possibility of path loss based on a defined critical domain. The node then transmits a handover packet to the next hop node, alternative nodes and previous node. The next node repairs the alternative path before path loss occurs to maintain connectivity and provide seamless service. We simulated protocols using both the ideal traffic model and the realistic traffic model to assess the proposed algorithm. The result shows that the protocols that include the proposed algorithm have fewer path losses, lower overhead, shorter delay and higher data throughput compared with other protocols in VANET.

• International journal of advanced smart convergence
• /
• v.7 no.2
• /
• pp.22-32
• /
• 2018

In VANET, frequent movement of nodes causes dynamic changes of the network topology. Therefore the routing protocol, which is stable to effectively respond the changes of the network topology, is required. Moreover, the existing cluster-based routing protocol, that is the hybrid approach, has routing delay due to the frequent re-electing of the cluster header. In addition, the routing table of CBRP has only one hop distant neighbor nodes. PCBRP (Paired CBRP), proposed in this paper, ties two clusters in one pair of clusters to make longer radius. Then the pair of the cluster headers manages and operates corresponding member nodes. In the current CBRP, when the cluster header leaves the cluster the delay, due to the re-electing a header, should be occurred. However, in PCBRP, another cluster header of the paired cluster takes the role instead of the left cluster header. This means that this method reduces the routing delay. Concurrently, PCBRP reduces the delay when routing nodes in the paired cluster internally. Therefore PCBRP shows improved total delay of the network and improved performance due to the reduced routing overhead.

• Journal of the Korea Society for Simulation
• /
• v.15 no.3
• /
• pp.79-86
• /
• 2006

This paper proposes a new protocol to enhance the routing performance and applies our proposal to AODV (Ad hoc On-demand Distance Vector routing) protocol, which is a typical on-demand routing protocol in MANET. In general, when a route repair procedure is performed due to the transfer or failure of a node, the source node re-initiate a route discovery procedure in most routing protocols of MANET. This causes to increase the control traffic overhead largely and degrade the routing performance. The main idea of our study is to provide a methodology that can minimize the control traffic overhead and enhance the performance by initiating a route repair procedure at destination node and utilizing the previous routing information maximumly. To evaluate the performance of the our mechanism, we have performed a series of simulations. The simulations include comparisons with AODV and AODV with local repair. The simulations have been executed under simulation environments taking into account mobility speed and network site. The simulation results show that our proposal overall outperforms the existing protocols.

• Journal of Communications and Networks
• /
• v.5 no.3
• /
• pp.266-274
• /
• 2003

One of the major issues in current on-demand routing protocols for ad hoc networks is the high resource consumed by route discovery traffic. In these protocols, flooding is typically used by the source to broadcast a route request (RREQ) packet in search of a route to the destination. Such network-wide flooding potentially disturbs many nodes unnecessarily by querying more nodes than is actually necessary, leading to rapid exhaustion of valuable network resources such as wireless bandwidth and battery power. In this paper, a simple optimization technique for efficient route discovery is proposed. The technique proposed herein is location-based and can be used in conjunction with the existing Location-Aided Routing (LAR) scheme to further reduce the route discovery overhead. A unique feature of our technique not found in LAR and most other protocols is the selective use of unicast instead of broadcast for route request/query transmission made possible by a novel reuse of routing and location information. We refer to this new optimization as the UNIQUE (UNIcast QUEry) technique. This paper studies the efficacy of UNIQUE by applying it to the route discovery of the Dynamic Source Routing (DSR) protocol. In addition, a comparative study is made with a DSR protocol optimized with only LAR. The results show that UNIQUE could further reduce the overall routing overhead by as much as 58% under highly mobile conditions. With less congestion caused by routing traffic, the data packet delivery performance also improves in terms of end-to-end delay and the number of data packets successfully delivered to their destinations.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12
• /
• pp.1-8
• /
• 2021

In Mobile Ad-Hoc Network (MANET) Application, routing protocol is essential to ensure successful data transmission to all nodes. Ad-hoc On-demand Distance Vector (AODV) Protocol is a reactive routing protocol that is mostly used in MANET applications. However, the protocol causes Route Request (RREQ) message flooding issue due to the broadcasting method at the route request stage to find a path to a particular destination, where the RREQ will be rebroadcast if no Request Response (RREP) message is received. A scalable neighbor-based routing (SNBR) protocol was then proposed to overcome the issue. In the SNBR protocol, the RREQ message is only rebroadcast if the number of neighbor nodes less than a certain fix number, known as drop factor. However, since a network always have a dynamic characteristic with a dynamic number of neighbor nodes, the fix drop factor in SNBR protocol could not provide an optimal flooding problem solution in a low dense network environment, where the RREQ message is continuously rebroadcast RREQ message until reach the fix drop factor. To overcome this problem, a new broadcasting method as Dynamic SNBR (DSNBR) is proposed, where the drop factor is determined based on current number of neighbor nodes. This method rebroadcast the extra RREQ messages based on the determined dynamic drop factor. The performance of the proposed DSNBR is evaluated using NS2 and compared with the performance of the existing protocol; AODV and SNBR. Simulation results show that the new routing protocol reduces the routing request overhead, energy consumption, MAC Collision and enhances end-to-end delay, network coverage ratio as a result of reducing the extra route request messages.

• Journal of Digital Convergence
• /
• v.11 no.5
• /
• pp.279-284
• /
• 2013

This paper proposes a new cluster-based routing protocol for assuring the service lifetime of wireless multimedia sensor networks. The proposed protocol performs the intra-cluster routing and inter-cluster routing to reduce the energy consumption and service lifetime in the wireless sensor multimedia computing environment, and the proposed mechanism enhances the routing reliability, and it minimizes the packet loss, overhead, and energy consumption. The simulation results show that the proposed mechanism outperforms DSR and AODV.

• Journal of information and communication convergence engineering
• /
• v.22 no.3
• /
• pp.207-214
• /
• 2024

In wireless sensor networks, the implementation of routing protocols is crucial owing to their limited computational capacities. Tree routing is a suitable method in wireless sensors owing to its minimal routing overhead. However, single-hop metric schemes, such as hop count, cause congestion at specific nodes, whereas multiple metric schemes cannot control dynamically changing network environments. To address these issues, we propose a scheme to implement enhanced tree routing with adaptive metrics based on hop count. This approach assigns different weights to metrics to select suitable parent nodes based on hop count. The parent-selection algorithm utilizes hop count, buffer occupancy, and received signal strength indicator (RSSI) as metrics. This study evaluates the performance through simulation scenarios to analyze whether improvements can be made to address problems encountered in traditional tree routing. The performance metrics include packet delivery speed, throughput, and end-to-end delay, which vary depending on the volume of network traffic.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.213-215
• /
• 2003

Multimedia has to carry data of heterogeous types. Multicast communication techniques can supply the most appropriate infrastructures to such multimedia. Of many multicast protocols, the core based tree (CBT) protocol is the most concentrative studies are conducted on. The CBT places a core router at center of the shared tree and transfers data through the tore router. However, the CBT has two problems due to centralizing all network traffics into a core router. First it can raise bottleneck effect at a core router. Second, it is possible to make an additive processing overhead when core router is distant from receivers. To cope with the problems, this paper proposes an intelligent anycast routing protocol. The anycast routing attempts to distribute the centralized traffic into plural core routers by using a knowledge-based algorithm. The anycast routing estimates the traffic characteristics of multimedia data far each multicast source, and achieves effectively the distributing that places an appropriate core router to process the incoming traffic based on the traffic information in the event that request of receivers are raised. This method prevent the additional overhead to distribute traffic because an individual core router uses the information estimated to multicast sources connected to oneself and the traffic processing statistics shared with other core neuters.