• 한국분말재료학회지
• /
• 제19권6호
• /
• pp.416-423
• /
• 2012

This paper introduces an effect of a preparing $ZrO_2$-Ag composite on its mechanical properties and microstructure. In present study, $ZrO_2$-Ag was prepared by reduction-deposition route and wetting dispersive milling method, respectively. Two type of Ag powders (nano Ag and micron Ag size, respectively) were dispersed into $ZrO_2$ powder during wetting dispersive milling in D.I. water. Each sample was sintered at $1450^{\circ}C$ for 2hr in atmosphere, and then several mechanical tests and analysis of microstructure were carried out by bending test, hardness, fracture toughness and fracture surface microstructure. As for microstructure, the Ag coated $ZrO_2$ showed homogeneously dispersed Ag in $ZrO_2$ in where pore defect did not appear. However, $ZrO_2$-nano Ag and $ZrO_2$-micro Ag composite appeared Ag aggregation and its pore defect, which carried out low mechanical property and wide error function value.

• 보건행정학회지
• /
• 제21권4호
• /
• pp.541-564
• /
• 2011

This study aimed to investigate health outcome of acute myocardial infarction (AMI) patients such as mortality and length of stay in hospital and to identify factors associated with the health outcome according to the comorbidity index. Nation-wide representative samples of 3,748 adult inpatients aged between 20-85 years with acute myocardial infarction were derived from the Korea National Hospital Discharge Injury Survey, 2005-2008. Comorbidity index was measured using the Charlson Comorbidity Index (CCI). The data were analyzed using t-test, ANOVA, multiple regression, logistic regression analysis in order to investigate the effect of comorbidity on health outcome. According to the study results, the factors associated with length of hospital stay of acute myocardial infarction patients were gender, insurance type, residential area scale, admission route, PCI perform, CABG perform, and CCI. The factors associated with mortality of acute myocardial infarction patients were age, admission route, PCI perform, and CCI. CCI with a higher length of hospital stay and mortality also increased significantly. This study demonstrated comorbidity risk adjustment for health outcome and presented important data for health care policy. In the future study, more detailed and adequate comorbidity measurement tool should be developed, so patients' severity can be adjusted accurately.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권5호
• /
• pp.1790-1806
• /
• 2015

Utility-based routing is a special type of routing approach using a composite utility metric when making routing decisions in ad hoc and sensor networks. Previous studies on the utility-based routing all use fixed retry limit and a very simple distance related energy model, which makes the utility maximization less efficient and the implementation separated from practice. In this paper, we refine the basic utility model by capturing the correlation of the transmit power, the retry limit, the link reliability and the energy cost. A routing algorithm based on the refined utility model with adaptive transmit power and retry limit allocation is proposed. With this algorithm, packets with different priorities will automatically receive utility-optimal delivery. The design of this algorithm is based on the observation that for a given benefit, there exists a utility-maximum route with optimal transmit power and retry limit allocated to intermediate forwarding nodes. Delivery along the utility-optimal route makes a good balance between the energy cost and the reliability according to the value of the packets. Both centralized algorithm and distributed implementations are discussed. Simulations prove the satisfying performance of the proposed algorithm.

• 한국대기환경학회지
• /
• 제8권2호
• /
• pp.100-104
• /
• 1992

본 연구는 비교 위험도 평가 기법을 사용하여, 도시 고형 폐기물의 소각에 따른 대기 오염 중 발암성 금속이 호흡기를 통해 소각로 주변 주민에게 미치는 암 위험도를 다옥신과 비교해 평가하였다. 어떤 물질이 인체에 암을 유발할 가능성이 있는 경우, 이 발암성은 물질의 화학적 형태 및 피폭경로에 관련될 지도 모른다. 물질의 발암성에 대한 이러한 사실이 조사되었고 위험도 정량화에 고려되었다. 본 연구 결과, 도시 고형 폐기물의 소각시 방출되는 발암성 금속으로 인한 위험도는 디옥신으로 인한 위험도의 약 5배 정도로 평가되었고, 위험도의 측면에서 가장 중요한 금속은 6가 크롬과 카드뮴인 것으로 판명되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.831-839
• /
• 2009

An interlocking equipment of railway signalling systems is manufactured with electrical devices and electrical interlocking equipment has been substituted for existing interlock equipment(relay sequential logic type). But interlock conditions are still generated from rail diagram and used to make Interlock Table manually. In order to make EIS(Electrical Interlock System) operate, we should write interlock data which is made from interlock table. But, as the station is larger and more complicated, handwork may becomes a very tediou work and makes more mistakes. Therefore the development of CAD system for Interlocking System is very significant, if CAD can reduce the mistakes from handwork and help the configuring the interlocking system. In this paper, we first arrange some rules which can be used to extract route information automatically from rail diagram and interlocking rules. And then we propose "Search-And-Rollback" algorithm to extract route information and individual interlocking rules. The proposed algorithm is implemented and tested through the signal design process of the Hyundai-Steel private railway to carry melted pig iron from the blast furnace to the steel-making workshop. some cases. It shows that CAD for Interlocking system is very helpful in time saving aspect and system reliability.

• 한국컴퓨터정보학회논문지
• /
• 제11권1호
• /
• pp.147-155
• /
• 2006

네트워크 이동성 기본 솔루션(NEMO basic solution)의 비 경로 최적화의 문제점을 해결하기 위한 방안 중 하나로 HPD(Hierarchical Prefix Delegation) 프로토콜이 있다. 그러나 HPD는 미시적 이동성에 대한 지원을 하지 못하므로 이동네트워크노드(MNN)가 접촉점을 변경할 때마다 MIPv6 프로토콜에서와 같이 HA(Home Agent)와 통신노드(CNs)로 BU(Binding Update) 메시지를 보내야하는 문제점을 갖는다. 본 논문은 HPD에 HMIPv6 프로토콜 개념을 적용하여 nested NEMO에서의 미시적 이동성을 효과적으로 지원하는 알고리즘을 제안하였다. 이동네트워크노드는 MAP(Mobility Anchor Point) 영역 안에서 위치변경 시 가까운 곳에 위치한 MAP으로만 BU를 보냄으로써 핸드오프 과정에서 발생하는 서비스 중단이나 신호 부하를 감소시켜 HPD에서의 한계를 극복하였다.

• 항공우주기술
• /
• 제12권1호
• /
• pp.173-181
• /
• 2013

본 논문에서는 동적 공역 형상 관리상의 변경이 발생할 때에 대한 항공 교통 효율성 평가에 사용될 궤적기반 항공 교통량 분석 소프트웨어의 설계 결과를 기술한다. 본 소프트웨어는 비행계획서에 기초한 인천 FIR의 항공 교통에 대한 통계 자료를 산출하고, 비행계획서 상의 항공기 종류, 순항고도, 속도, 이동 경로 등으로부터 도출된 궤적 모델링 자료를 이용하여 항공로 이용율, 관제사 관제량을 분석하도록 설계되었다. 공역 설계 및 항공로 입력 정보와 함께 장기간에 걸친 궤적 모델링 자료를 한꺼번에 입력받아 일괄 처리하는 방식을 적용함에 따라, 본 소프트웨어는 공역 및 항공로 등의 수정 내용에 따른 교통량 변화를 빠르게 예측할 수 있는 장점을 가진다.

• 산업경영시스템학회지
• /
• 제36권3호
• /
• pp.71-78
• /
• 2013

An efficient vehicle routing heuristic for different vehicle moving times for forward and backward between two points is studied in this research. Symmetric distance or moving times are assumed to move back and forth between two points in general, but it is not true in reality. Also, various moving speeds along time zones are considered such as the moving time differences between rush hours or not busy daytimes. To solve this type of extremely complicated combinatorial optimization problems, delivery zones are specified and delivery orders are determined for promising results on the first stage. Then delivery orders in each zone are determined to be connected with other zones for a tentative complete delivery route. Improvement steps are followed to get an effective delivery route for unsymmetric-time-varing vehicle moving speed problems. Performance evaluations are done to show the effectiveness of the suggested heuristic using computer programs specially designed and developed using C++.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.343-350
• /
• 2004

LNG 운반선은 항해중 외부로부터 다량의 열 침임으로 인해 많은 BOG가 발생하며 통상 이는 선박엔진의 연료로 사용된다. 화주의 입장에서 이러한 BOG의 발생과 소비는 화물의 손실을 의미하며, 따라서 선주와 화주 사이에는 BOR(boil off rate)에 대해 만선항해를 기준으로 0.15％／day 이하가 되도록 운송계약을 체결한다. LNG 운반선의 항해사관 입장에서는 자신이 승무하고 있는 선박의 BOR에 대한 정확한 지식을 바탕으로 선박을 운항할 필요가 있으나 실제로는 막연한 경험에 의존하고 있는 실정이다. 따라서 본 연구에서는 선체온도분포 및 외부로부터의 침입열량에 관한 정밀 열설계 기술을 토대로 본선의 해기사들이 보다 간편하게 BOG를 예측할 수 있는 간단한 모델을 제시하였다. 그리고 개발된 모델을 사용하여 연구대상 선박의 실제 기상조건을 토대로 만선 및 공선항해에 대하여 각각 BOR을 계산하였으며 이를 실측자료와 비교, 검토하였다. 본 연구에서 제시된 BOG 예측방법은 현재 운항중인 LNGC에서 BOG를 관리하는 유용한 도구로 사용될 것으로 기대된다.

• 한국항해학회지
• /
• 제19권2호
• /
• pp.23-75
• /
• 1995

A major change occuring in the workplace is the willingness of union leaders, managers, and workers to experiment with various work schedules and to work toward the improvement in the QWL(quality of work life). In this study, the writer measures the level of QWL, embodies components of QWL, testifies the difference of QWL according to the demographical traits, and develops some scales to measure QWL in merchant ships. To achieve objectives of the paper, 11 hypotheses were established and a questionnaire was used, 894 proper data was obtained from 2, 910 Korean seamen working in merchant ships. Results of analyses are as follows : 1) The components of QWL in merchant ships are job, employee satisfaction, wage, welfare, working condition, supervise, colleague relations, initiative, and organization management. 2) Seamen of merchant ships are satisfied with job, supervise, colleague relations, and organization management. They are dissatisfied employee satisfaction, wage, welfare, and working condition. 3) According to demographical traits, the number of the factors significant difference(P<0.05) among components of QWL are 9 for type of ships, 8 ages of seamen, 7 for married or single, nationality of ships, and education level respectively, 5 for seamen career, for 4 rank on board and trading route of ships respectively, 2 for whether union or not and whether union involvement or not respectively, and 1 for department on board. 4) Results which tested hypotheses are as follows : For the components of QWL, married men are more satisfactory than an unmarried men, officers are more dissatisfactory than ratings, old men are more satisfactory than young men, men in high education level are more dissatisfactory than men in low education level, those who are much careers as a seaman are more satisfactory than those who are little careers as a seaman. There are significant differences in the components of QWL according to nationality and type of ships. There are insignificant differences in the components of QWL according to the shipboard department, whether union is or not, whether union involvement is or not, and trading route of ships.