• Journal of Communications and Networks
• /
• v.5 no.3
• /
• pp.266-274
• /
• 2003

One of the major issues in current on-demand routing protocols for ad hoc networks is the high resource consumed by route discovery traffic. In these protocols, flooding is typically used by the source to broadcast a route request (RREQ) packet in search of a route to the destination. Such network-wide flooding potentially disturbs many nodes unnecessarily by querying more nodes than is actually necessary, leading to rapid exhaustion of valuable network resources such as wireless bandwidth and battery power. In this paper, a simple optimization technique for efficient route discovery is proposed. The technique proposed herein is location-based and can be used in conjunction with the existing Location-Aided Routing (LAR) scheme to further reduce the route discovery overhead. A unique feature of our technique not found in LAR and most other protocols is the selective use of unicast instead of broadcast for route request/query transmission made possible by a novel reuse of routing and location information. We refer to this new optimization as the UNIQUE (UNIcast QUEry) technique. This paper studies the efficacy of UNIQUE by applying it to the route discovery of the Dynamic Source Routing (DSR) protocol. In addition, a comparative study is made with a DSR protocol optimized with only LAR. The results show that UNIQUE could further reduce the overall routing overhead by as much as 58% under highly mobile conditions. With less congestion caused by routing traffic, the data packet delivery performance also improves in terms of end-to-end delay and the number of data packets successfully delivered to their destinations.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.9
• /
• pp.39-45
• /
• 2009

When Mobile IPv6 is deployed in commercial network, a mobile node needs AAA services for an authentication, authorization and accounting. AAA and Mobile IPv6 are protocols which are operated independently. Then schemes which merge these protocols have been emerged. These schemes can enable a mobile node to establish a security association between the mobile node and a home agent and to perform a binding update for the home agent using AAA authentication request. But these schemes introduce many signal messages and long handover latency during the handover, since Route Optimization mode for Mobile Ipv6 is performed using Return Routability procedure. To solve this problem, we propose a scheme for Route Optimization mode that the home agent performs the binding update for a correspondent node via the AAA infrastructure between the home agent and the correspondent node instead of Return Routability procedure. For performance evaluation, we analyze signal message transmission costs and handover latencies during handover. We show performance improvement of the proposed scheme which reduces handover latency as 61% compared with the existing scheme.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.7
• /
• pp.59-66
• /
• 2010

In this paper, we compare the performance of proposals for route optimization handover, which provides optimized communication to mobile node, presented in IETF (Internet Engineering Task Force). For comparison, we consider the architecture with two MAGs (Mobile Access Gateways) and single LMA (Local Mobility Anchor), and analyze the signaling cost, handover latency, and packet loss. Evaluation results show that they are changed depending on the involved component, the number of route optimization messages and performance factor that each proposal targets.

• Journal of Internet Computing and Services
• /
• v.9 no.1
• /
• pp.9-19
• /
• 2008

This paper propose the issue of connecting nested NEMO (Network Nobility) networks to global IPv6 networks, while supporting IPv6 mobility. Specifically, we consider a self-addressing including topology information IPv6-enabled NEMO infrastructure. The proposed self-organization addressing protocol automatically organized mobile routers into free architecture and configuration their global IPv6 addresses. BU(binding update) to MR own HA and internal rouging, hosed on longest prefix matching and soft state routing cache, are specially designed for IPv6-based NEMO. In conclusion, numeric analysis ore conducted to show more efficiency of the proposed routing protocols than other RO (Route Optimization) approaches.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.11 no.4
• /
• pp.9-17
• /
• 2007

Network Mobility basic support protocol (NEMO Basic) extends the operation of Mobile IPv6 to provide uninterrupted Internet connectivity to the communicating nodes of mobile networks. The protocol uses a mobile router (MR) in the mobile network to perform prefix scope binding updates with its home agent (HA) to establish a bi-directional tunnel between the HA and MR. This solution reduces location-update signaling by making network movements transparent to the mobile nodes (MNs) behind the MR. However, delays in data delivery and higher overheads are likely to occur because of sub-optimal routing and multiple encapsulation of data packets. To manage the mobility of the mobile network, it is important to minimize packet overhead, to optimize routing, and to reduce the volume of handoff signals over the nested mobile network. This paper proposes en aggregate router-assisted route optimization (ARARO) scheme for nested mobile networks support which introduces a local anchor router in order to localize handoff and to optimize routing. With ARARO, a mobile network node (MNN) behind a MR performs route optimization with a correspondent node (CN) as the MR sends a binding update message (BU) to aggregate router (AGR) via root-MR on behalf of all active MNNs when the mobile network moves. This paper describes the new architecture and mechanisms and provides simulation results which indicate that our proposal reduces transmission delay, handoff latency and signaling overhead. To evaluate the scheme, we present the results of simulation.

• Structural Engineering and Mechanics
• /
• v.88 no.4
• /
• pp.323-334
• /
• 2023

The submerged floating tunnel (SFT) infrastructure has been regarded as an emerging technology that efficiently and safely connects land and islands. The SFT route problem is an essential part of the SFT planning and design phase, with significant impacts on the surrounding environment. This study aims to develop an optimization model considering transportation and structure factors. The SFT routing problem was optimized based on two objective functions, i.e., minimizing total travel time and cumulative strains, using NSGA-II. The proposed model was applied to the section from Mokpo to Jeju Island using road network and wave observation data. As a result of the proposed model, a Pareto optimum curve was obtained, showing a negative correlation between the total travel time and cumulative strain. Based on the inflection points on the Pareto optimum curve, four optimal SFT routes were selected and compared to identify the pros and cons. The travel time savings of the four selected alternatives were estimated to range from 9.9% to 10.5% compared to the non-implemented scenario. In terms of demand, there was a substantial shift in the number of travel and freight trips from airways to railways and roadways. Cumulative strain, calculated based on SFT distance, support structure, and wave energy, was found to be low when the route passed through small islands. The proposed model helps decision-making in the planning and design phases of SFT projects, ultimately contributing to the progress of a safe, efficient, and sustainable SFT infrastructure.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.871-874
• /
• 2008

이동성을 제공하기 위한 프로토콜 중 오랜 기간 많은 연구로 표준화가 된 Mobile IPv6 (MIPv6)가 있다. MIPv6는 호스트 기반 이동성 제공 프로토콜로서 이동 단말이 이동성에 필요한 시그널링을 직접수행한다. 한편, 최근에 표준화 작업이 진행 중인 Proxy Mobile IPv6 (PMIPv6)는 네트워크 기반 이동성 제공 프로토콜로서 이동 단말이 아닌 네트워크 자체에서 이동성을 제공한다. PMIPv6는 MIPv6에서 Home Agent와 같은 역할을 하는 Local Mobility Anchor 와 이동 단말이 수행하던 시그널링을 대신하는 Mobile Access Gateway를 정의하여 이동성을 제공한다. PMIPv6의 기본 동작 과정에 대한 표준화가 진행됨에 따라 프로토콜의 최적화에 대한 이슈가 부각되고 있다. Route Optimization은 이러한 최적화 이슈 중 하나로서 패킷 전송 시 최적화 된 경로를 설정하고 발생할 수 있는 전송 지연을 최소화하는 기법이다. 본 논문에서는 PMIPv6에서의 Route Optimization을 적용하기 위해 Liebesch 인터넷 드래프트에서 제안 한 기법의 동작 과정을 살펴보고 PMIPv6의 기본 전송 과정과 비교하여 그 성능을 분석하였다.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.4
• /
• pp.246-252
• /
• 2012

The piping route of hydraulic hose is designed with avoiding interferences to surrounding components. However, in a real practice, the piping route is mostly decided with an expert's experiences on site due to the complexity of design. Thus, this paper proposes a design methodology of the optimized route of a hose. We use NURBS representation to describe the piping route, which is possible to be locally modified, and an energy minimization method is applied to avoid interferences to the surroundings. In other words, the NURBS curve describing a piping route is modified to meet the desired positions from minimizing the perturbation of the control points, and the strain energy of the curve is then optimized to make the curve natural. The proposed method is implemented and its feasibility is validated using the commercial CAD software, CATIA V5.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1A
• /
• pp.82-89
• /
• 2011

The Proxy Mobile IPv6 is a network-based localized mobility management protocol. In the PMIPv6, Mobile Nodes are topologically anchored at a Local Mobility Anchor, which forwards all data packets for registered Mobile Nodes. Since all data packets destined for the Mobile Nodes a1ways traverse the Mobile Nodes's Local Mobility Anchor, the LMA might be bottleneck and the end-to-end de1ay are increased. Therefore, in this paper, we proposed an enhanced Route Optimization scheme in Multiple Local Mobility Anchors environment. In order to rapid1y detect Route Optimization, we designed Domain Information Table in Mobility Access Gateway. Furthermore, we use Correspondent Binding Cache in Local Mobility Anchor to maintain Route Optimization information during Mobile Nodes's handover. To solve packet loss and reodering problems during handover, we propose a new buffering and forwarding scheme.

• Journal of KIISE:Information Networking
• /
• v.30 no.6
• /
• pp.677-684
• /
• 2003

IETF's Mobile IP protocol allows Mobile Node(MN) to keep connection to Correspondent Node(CN) no matter what the MN changes its point of attachment to the Internet. However, the protocol incurs triangle routing problem, because all packets for the MN are routed through its Home Agent(HA). Route optimization mechanism is proposed by IETF in order to resolve triangle routing problem, but it requires that any node in the Internet should also implement route optimization mechanism. In this paper, we propose a new route optimization algorithm. With the algorithm, routers between HA and CN are considered as Intermediate Agent(IA), and packets transmitted by CN are not forwarded to HA but intercepted by IA and tunneled to MN directly.