• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.177-180
• /
• 2011

In practice, it is well known that geographical and/or location based routing is highly effective for wireless sensor network. Here, electing some landmarks on the network and forwarding data based on the landmark is one of the good approaches for a vast sensing field with holes. In the most previous works, landmarks are elected without considering the residual energy on each sensor. In this paper, we propose an Energy aware Landmark Election and Routing (ELER) protocol to establish a stable routing paths and reduce the total power consumption. The proposed protocol makes use of each sensor's energy level on electing the landmarks, which would be utilized to route a packet towards the target region using greedy forwarding method. Our simulation results illustrate that the proposed scheme can significantly reduce the power dissipation and effectively lengthen the lifetime of the network.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.1
• /
• pp.91-100
• /
• 1986

The nonlinear rate equations are solved analytically by using the singular perturbation method to study effects of the spontaneous emission factor and the photon lifetime on the primary resonance and the first subharmonic generation(i.e., the onset of the periocd-doubling route to chaos). By large signal modulation of Hitachi CSP laser HLP 1400, the resonance frequency shift than 100 ps with 1 GHz repetition rate are generated. The experimental observations are in reasonable agreement with the theoretical results obtained using measured parameters of the rate equations.

• Journal of KIISE
• /
• v.42 no.10
• /
• pp.1268-1279
• /
• 2015

In order to manage a large number of devices connected to the Internet of Things (IoT), the Internet Engineering Task Force (IETF) proposed the IPv6 Routing Protocol for Low Power and Lossy Networks (RPL). The route of the RPL network is generated through the use of an Objective Function (OF) that is suitable for the service that is required for the IoT network. Since the route of the RPL network is conventionally simply chosen only by considering the link quality between the nodes, it is sensible to seek an OF that can also provide better Quality of Service (QoS). In previous studies, the end-to-end delay might possibly be sub-optimal because they only deal with problems related to the reduction of energy consumption and not to the link quality on the path to the sink node. In this study, we propose a scheme that reduces the end-to-end delay but also gives full consideration to both the quality on the entire route to the destination and to the expected lifetime of nodes with bottlenecks from heaped traffic. Weighting factors for the proposed scheme are chosen by experiments and the proposed scheme can reduce the end-to-end delay and the energy consumption of previous studies by 20.8% and 10.5%, respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.469-472
• /
• 2008

Hierarchical routing in Wireless Sensor Network lowers the amount of a memory used and energy consumption so that the network lifetime longer. But, When Node Failure is occurred, Hierarchical routing do not look for another route. This is the problem of Hierarchical routing. To solve the problem, we would study other hierarchical routings. There are typically hierarchical routing protocols which can be used in WSN, such as the hierarchical routing of Zigbee and HiLow protocol which is submitted as draft to IETF 6LoWPAN WG. Also, there is SCRO algorithm which be able to assign short-cut routing path. This paper explains how to solve the Node Failure in each Zigbee hierarchical routing and HiLow protocol. And we suggest how to solve the Node Failure in SCRO protocol. SCRO protocol is able to assign new routing path rapidly when Node Failure is occurred. Because the strong of SCRO protocol is to assign Short-cut routing path.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.3 s.357
• /
• pp.18-25
• /
• 2007

In sensor networks, sensor nodes have limited computational capacity, power and memory. Thus energy efficiency is one of the most important requirements. How to extend the lifetime of wireless sensor networks has been widely discussed in recent years. However, one of the most effective approaches to cope with power conservation, network scalability, and load balancing is clustering technique. The function of a cluster head is to collect and route messages of all the nodes within its cluster. Cluster heads must be changed periodically for low energy consumption and load distribution. In this paper, we propose an energy-aware cluster head selection algorithm and Distance Estimation-based distributed Clustering Algorithm (DECA) in wireless sensor networks, which exchanges cluster heads for less energy consumption by distance estimation. Our simulation result shows that DECA can improve the system lifetime of sensor networks up to three times compared to the conventional scheme.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.21-29
• /
• 2010

In Ad-Hoc Networks, the limited energy is the key issue for longer network operation time. To solve this problem, various energy-aware routing techniques have been proposed including PSR (Power-aware Source Routing), HPSR (Hirachical Power-aware Source Routing), and etc. Those techniques generally select the most adequate route considering the energy consumption so that the energy efficiency can be improved. However, There are problems in those techniques that traffic can be concentrated in some specific area in a network. In this paper, a new energy aware routing technique called MPSR is proposed to achieve longer network lifetime and fewer rerouting attempts.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.4
• /
• pp.15-24
• /
• 2008

In this paper, we propose a Cross-Layer Transmission Architecture (CLTA) to support power saving high-speed multimedia services in mobile ad-hoc wireless sensor networks(MAWSN). The main goals of this paper are in showing and proposing how the routing routes are decided on route stability based on mobility of mobile nodes to increase the operational lifetime of routes as well as how the transmit power can be saved in mobile ad-hoc wireless sensor networks. To obtain these goals, we propose a cross-layer architecture strategy which combines network layer technology with physical layer technology to get synergy effects in the view of transmission power saving. We consider a realistic approach, in the points of view of the MAWSN, based on mobile sensor nodes as well as fixed sensor nodes in sensor fields while the conventional research for sensor networks focus on mainly fixed sensor nodes. The performance evaluation of the proposed CLTA is performed via simulation and analysis.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.327-332
• /
• 2016

The routing protocol for low-power and lossy networks (RPL) is an internet protocol based routing protocol developed and standardized by IETF in 2012 to support a wide range of applications for low-power and lossy-networks (LLNs). In LLNs consisting of resource-constrained devices, the energy consumption of battery powered sensing devices during network operations can greatly impact network lifetime. In the case of inefficient route selection, the energy depletion from even a few nodes in the network can damage network integrity and reliability by creating holes in the network. In this paper, a composite energy-aware node metric ($RER_{BDI}$) is proposed for RPL; this metric uses both the residual energy ratio (RER) of the nodes and their battery discharge index. This composite metric helps avoid overburdening power depleted network nodes during packet routing from the source towards the destination oriented directed acyclic graph root node. Additionally, an objective function is defined for RPL, which combines the node metric $RER_{BDI}$ and the expected transmission count (ETX) link quality metric; this helps to improve the overall network packet delivery ratio. The COOJA simulator is used to evaluate the performance of the proposed scheme. The simulations show encouraging results for the proposed scheme in terms of network lifetime, packet delivery ratio and energy consumption, when compared to the most popular schemes for RPL like ETX, hop-count and RER.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.106-113
• /
• 2008

In this paper, we propose an Entropy-based Cooperative-Aided Routing Protocol (ECARP) in Mobile Ad-hoc fireless Sensor Networks (MAWSN). The main contributions and features of this paper are as follows. First, the entropy-based cooperative routing protocol which is based on node mobility is proposed for supporting stable routing route construction. Second, cooperative data transmission method is used for improving data transmission ratio with the improved SNR. Third, we consider a realistic approach, in the points of view of the MAWSN, based on mobile sensor nodes as well as fixed sensor nodes in sensor fields while the conventional research for sensor networks focus on mainly fixed sensor nodes. The performance evaluation of the proposed routing protocol is performed via simulation and analysis.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.29-45
• /
• 2017

Ad hoc sensor network is characterized by decentralized structure and ad hoc deployment. Sensor networks have all basic features of ad hoc network except different degrees such as lower mobility and more stringent energy requirements. Existing protocols provide different tradeoffs among some desirable characteristics such as fault tolerance, distributed computation, robustness, scalability and reliability. wireless protocols suggested so far are very limited, generally focusing on communication to a single base station or on aggregating sensor data. The main reason having such restrictions is due to maximum lifetime to maintain network activities. The network lifetime is an important design metric in ad hoc networks. Since every node does a router role, it is not possible for other nodes to communicate with each other if some nodes do not work due to energy lack. In this paper, we suggest an experimental ad-hoc on-demand distance vector routing protocol to optimize the communication of energy of the network nodes.The load distribution avoids the choice of exhausted nodes at the route selection phase, thus balances the use of energy among nodes and maximizing the network lifetime. In transmission control phase, there is a balance between the choice of a high transmission power that lead to increase in the range of signal transmission thus reducing the number of hops and lower power levels that reduces the interference on the expense of network connectivity.