• 지질공학
• /
• 제29권3호
• /
• pp.237-249
• /
• 2019

본 연구에서는 지하수의 이동에 영향을 주는 암반의 균열에 대해서 고온하에서의 다단계 압력실험을 통해 균열면의 거칠기 변화에 대한 분석을 실시하였다. 연구에 사용된 시료는 지표에서 지하 500 m 구간에서 획득한 조립질 화성암과 세립질 화성암 시료 중 심도 약 40 m와 270 m의 시료를 실험에 사용하였다. 압력은 최대 120 MPa 까지 가압을 하였으며, 단계적으로 10 MPa씩 증가하면서 실험을 수행하였다. 각 단계에서의 표면 변화를 관측하기 위해서 고분해능 3차원 다초점 레이저 스캔 현미경(Confocal Laser Scanning Microscope, CLSM)을 사용하였으며, 이를 통해서 미세한 표면의 거칠기를 확인할 수 있었다. 거칠기의 변화에 대해서는 거칠기 인자값을 기준으로 변화된 양을 계산하였다. 본 실험에 사용된 시료는 $20{\times}40{\times}5mm$ 크기를 가지고 있으며, 가압장치는 나사방식으로 압력을 가할 수 있도록 제작한 챔버를 활용하여 실험을 수행하였다. 실험결과 단계적으로 압력이 가해지는 조건에서 압력에 따른 균열면의 거칠기는 입자의 크기에 따라 다른 변화를 보이는 것으로 확인되었으며, 이러한 자료는 추후 암석의 균열면을 따라 이동할 수 있는 지하수의 흐름에 대한 예측을 위한 기초자료로 활용 될 수 있을 것으로 기대한다.

• 한국환경과학회지
• /
• 제18권8호
• /
• pp.857-865
• /
• 2009

The physical properties of an atmospheric boundary layer in Wolryong, a west coastal region of Jeju, South Korea, in terms of the atmospheric stability and roughness length, is important and relevant to both engineers and scientists. The study is aiming to understand the atmospheric stability around this region and its effect on the roughness length. We calculate the Monin-Obukhov length(L) against 3 typical regions of the atmospheric condition - unstable regime (-5$-0.2{\leq}H/L{\leq}0.2$) and stable regime (0.2

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제31회 춘계학술대회
• /
• pp.243-250
• /
• 2000

In the partial lubrication regime, the roughness effects are most important due to the presence of interacting asperities. An average Reynolds equation using flow factors is very useful to determine effects of surface roughness on partial lubrication. In this paper, the pressure flow factors for Gaussian and non-Gaussian surfaces are evaluated in terms of kurtosis. The effect of kurtosis on pressure flow factor is investigated using random rough surface generated numerically. The pressure flow factor increases with increasing kurtosis in partial lubrication regime(h/$\sigma$<3). As h/$\sigma$increases, the pressure flow factor approach to 1 asymptotically regardless of kurtosis.

• 지질공학
• /
• 제25권2호
• /
• pp.165-178
• /
• 2015

Physical and chemical weathering degrades rock, affecting its structural properties and thus the stability of stone buildings or other structures. Confocal laser scan microscopy (CLSM) is used here to observe temporal changes in the surface roughness of rock samples under simulated accelerated weathering. Samples were pressurized to 50, 55, or 70 MPa using a pressure frame, and subjected to freeze/thaw cycling controlled by a thermostat. The temperature was cycled from -20℃ to 40℃ and back. After each 20 cycles, CLSM was used to assess the change in surface roughness, and roughness factors were calculated to quantify the progression of the surface condition over time. Variations in cross-section line-roughness parameters and surface-roughness parameters were analyzed for specific parts of the sample surfaces at 5× and 50× magnification. The result reveals that the highest and lowest values of the roughness factors are changed according to elapsed time. Freezing/thawing at high pressure caused larger changes in the roughness factor than at low pressure.

• 한국환경과학회지
• /
• 제22권5호
• /
• pp.563-570
• /
• 2013

Roughness coefficient was computed for review of applicability based on measurement of the representative grain diameter reflecting channel characteristics of Han Stream. After field survey, collection of bed material, and grain analysis on the collected bed material, roughness coefficient was computed using representative grain and existing empirical equation for roughness coefficient. Value of roughness coefficient calculated using equation by Meyer-Peter and Muller (1948) was 0.0417 for upstream, 0.0432 for midstream, and 0.0493 for downstream. As a result of comparing the computed roughness coefficient to other empirical equations for review of applicability, the coefficient was larger in Strickler (1923) equation by 0.006. Smaller coefficient was shown by Planning Report for River Improvement Works. Equation by Garde and Raju (1978) was larger by 0.004, and equations by Lane and Carlson (1953) and by Meyer-Peter and Muller (1948) were larger by 0.001. Such precise roughness coefficient is extremely important when computing the amount of flood in rivers to prevent destruction of downstream embankments and property damages from flooding. Since roughness coefficient is a factor determined by complicated elements and differs according to time and space, continued management of roughness coefficient in rivers and streams is deemed necessary.

• Tribology and Lubricants
• /
• 제20권5호
• /
• pp.284-291
• /
• 2004

We present a three-dimensional average flow model considering elastic deformation of pad asperities for chemical mechanical planarization. To consider the contact deformation of pad asperities in the calculation of the flow factor, three-dimensional contact analysis of a semi-infinite solid based on the use of influence functions is conducted from computer generated three dimensional roughness data. The average Reynolds equation and the boundary condition of both force and momentum balance are used to investigate the effect of pad roughness and external pressure conditions on film thickness and wafer position angle.

• 대한기계학회논문집A
• /
• 제30권11호
• /
• pp.1335-1347
• /
• 2006

Surface energies calculated from measured contact angles between several solutions and test samples, such as Si wafer, $Al_2O_3$, $SiO_2$, PTFE(Polytertrafluoroethylene), and DLC(Diamond Like Carbon) films, based on geometric mean method and Lewis acid base method. In order to relate roughness to adhesion force, surface roughness of test samples were scanned large area and small by AFM(Atomic Force Microscopy). Roughness was representative of test samples in large scan area and comparable with AFM tip radius in small scan area. Adhesion forces between AFM tip and test samples were matched well with order of roughness rather then surface energy. When AFM tips having different radius were used to measure adhesion force on DLCI film, sharper AFM tip was, smaller adhesion force was measured. Therefore contact area was more important factor to determine adhesion force.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.240-246
• /
• 2000

An in-process estimation of the ground surface roughness is a bottle-neck and an essential field in conventional grinding operation. We defined the dimensionless average roughness factor (D.A.R.F) that exhibits a roughness characteristics of ground surface. The D.A.R.F was composed easily of the absolute average and the standard deviation values which were the analytic parameters of the acoustic emission (AE) signal generated during the machining process. The theoretical equation between the surface roughness and the D.A.R.F has been derived from the linear regressive analysis and verified its availability through the experimentation on the surface grinding machine.

• 한국산업융합학회 논문집
• /
• 제2권2호
• /
• pp.147-153
• /
• 1999

An in-process extraction method of the ground surface roughness is a bottle-neck and essential field in conventional machining process. We define the D.A.R.F(Dimensionless Average Roughness Factor) that has a roughness characteristic of ground surface. D.A.R.F include the absolute average and the standard deviation values which are the analytic parameters of the AE(Acoustic Emission) signal generated during the grinding operation. The theoretical equation between the surface roughness and the D.A.R.F has been derived from the linear regressive analysis and verified its availability through the experimentation on the surface grinding machine.

• 한국생산제조학회지
• /
• 제7권1호
• /
• pp.34-40
• /
• 1998

Conductive metal matrix composite(MMC) material of 30% silicon carbide particulated based on aluminum matrix was machined by die sinking electrical discharge machining(EDM) process according to different current and duty factor for reverse polarity of electrode. Material removal rate(MRR) was examined by process under various operation conditions. The surface morphology was evaluated by surface roughness parameter and scanning electron microscopy(SEM) research. The MRR was suddenly increased over 11 ampere of current, and it was slightly changed over 0.3 of duty factor. The maximum surface roughness of EDMed surface was affected by the duty factor. The SEM photograghs of EDMed surface showed wide recast distribution region of melting materials as increased of current and duty factor.