• Journal of Advanced Research in Ocean Engineering
• /
• 제2권3호
• /
• pp.99-111
• /
• 2016

Seabed affected by scouring, sedimentation, and siltation occurrences often cause exposure, which induces risks to existing structures or crude oil or gas pipeline buried subsea. In order to prevent possible risks, more economical structure installation methodology is proposed in this study by predicting and managing the risk. Also, the seabed does not only consist of sandy material, but clayey soil is also widespread, and the effect of undrained shear strength should be considered, and by cyclic environmental load, pore water pressure will occur in the seabed, which reduces shear strength and allows particles to move easily. Based on previous research regarding sedimentation or erosion, the average value of external environmental loads should be applied; for scouring, a 100-year period of environmental conditions should be applied. Also, sedimentation and erosion are mainly categorized by the bed load and suspended load; also, they are calculated as the sum of bed load and suspended load, which can be obtained from the movement of particles caused by sedimentation or erosion.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.957-960
• /
• 1997

A complete quantitative understanding of DT has been difficult because the process represents such s broad field of research. The experimental measurement of tool force is a single area of DT which still covers a wide range of possibilities. Here are numerous parameters of the process which affect cutting forces. There are also many turnable materials of current interest. To obtain information toward a better understanding of the process, a few cutting parameters and materials were selected for detail study. It was decided that free-oxygen copper and 6061-T6 alloy aluminum would be the primary test materials. There are materials which other workers have also used because of there wide use in reflective applications. The experimental phase of the research project began by designing tests to isolate certain cutting parameters. The parameters chosen to study were those that affected the cross-sectional area of the uncut chip. The specific parameters which cause this area to vary are the depth of cut and infeed per revolution, or feedrates. Other parameter such a tool nose radius and surface roughness were investigated as they became relevant to the research.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.306-311
• /
• 2001

Effect of boundary layer thickness on the flow characteristics around a rectangular prism has been investigated by using a PIV(Particle Image Velocimetry) technique. Three different boundary layers(thick, medium and thin)were generated in the Atmospheric Boundary Layer Wind Tunnel at Pusan National University. The thick boundary layer having 670mm thickness was generated by using spires and roughness elements. The medium thickness of boundary layer$(\delta=270mm)$ was the natural turbulent boundary layer at the test section with fully long developing length(18m). The thin boundary layer with 36.5mm thickness was generated by on a smooth panel elevated 70cm from the wind tunnel floor. The Reynolds number based on the free stream velocity and the height of the model was $7.9{\times}10^3$. The mean velocity vector fields and turbulent kinetic energy distribution were measured and compared. The effect of boundary layer thickness is clearly observed not only in the length of separation bubble but also in the reattachment points. The thinner boundary layer thickness, the higher turbulent kinetic energy peak around the model roof. It is strongly recommended that the height ratio between model and approaching boundary layer thickness should be a major parameter.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.772-777
• /
• 2006

An acoustic finite element model of a bridge is developed to evaluate the noise generated by the traffic-induced vibration of the bridge. The dynamic response of a multi-girder bridge, modeled by a 3-dimensional frame element model, is analyzed with a 3-axle(8DOF) truck model and a 5-axle(l3DOF) semi-trailer. The flat plate element is used to analyze the acoustic pressure due to the fluid-structure interactions between the vibrating surface and contiguous acoustic fluid medium. The radiation fields of noise with a specified distribution of vibrating velocity and pressure on the structural surface are also computed using the Kirchhoff-Helmholtz integral. In an attempt to illustrate the influence of the structural vibration noise of a bridge to total noise level around the bridge, the random function is used to generate the vehicle noise source including the engine noise and the rolling noise interacting between the road and tire. Among the diverse parameters affecting the dynamic response of bridge, the vehicle velocity, the vehicle weight, the spatial distribution of the road surface roughness, the stiffness degradation of the bridge and the variation of the air temperature changing the air density are found to be the main factors that increase the level of vibration noise. Consequently, The amplification rate of noise increases with the traveling speed and the vehicle weight.

• 한국수자원학회논문집
• /
• 제33권1호
• /
• pp.39-50
• /
• 2000

일반적으로 동수역학 모형은 마찰인자(조도계수 또는 Chezy계수)와 와점성계수를 필요로 하고 수치계산에서 이들 계수의 갑은 통상 가정 또는 반복계산을 통하여 결정된다. 수치모형에서 와점성계수는 물리적인 확산뿐만 아니라 수치점성의 효과도 가지고 있어서 수치계산의 안정성에 영향을 미치므로 이들 계수의 일관된 결정방법이 필요하다. 수위 및 유량자료, 1차원 모형인 HEC-2와 NETWORK, 2차원 모형인 SMS를 이용하여 한강하류 구간에 대한 조도계수의 산정결과와 와점성 계수의 산정식이 제시되었으며 실측수위와 비교를 통해 검증되었다.

• 폴리머
• /
• 제24권1호
• /
• pp.23-28
• /
• 2000

Solvent 용접에 따른 무정형 고분자 폴리스티렌/폴리스티렌 계면의 접착강도의 변화를 butt joint실험을 통하여 살펴보았다. 폴리스티렌과 용해도 상수가 유사한 용매를 계면에 코팅함으로써 계면 분자쇄의 유동성 증가와 계면의 거침정도의 변화에 따른 접촉표면의 증가로 인하여 접착 강도가 증가함을 확인하였다. 사용용매의 비등점이 접착온도보다 높은 경우, 접착강도의 증가는 용매에 의한 분자쇄의 유동성 증가에 기인되는 반면 용매의 비등점이 접착온도에 비해 낮을 경우 접착강도의 증가는 용매에 의한 접촉표면의 증가에 의존함을 알 수 있었다. 접착온도가 높을수록, 접착시간이 길어질수록 접착강도는 증가되며, 사용용매가 접착강도에 미치는 영향은 감소함을 알 수 있었다.

• 한국정밀공학회지
• /
• 제27권12호
• /
• pp.15-21
• /
• 2010

Recently, there is a demand for a thermal imaging microscope in the medical field as well as the semi-conductor industry Although the demand of the advanced thermal imaging microscope has been increased, it is very difficult to obtain the technology of developing a thermal camera, because it is used for defense industry. We developed the ${\times}5$ zoom microscope which has $3\;{\mu}m$ spatial resolution to research the design and fabrication of the IR (Infrared) optical system. The optical system of the IR microscope consists of four spherical lenses and four aspheric lenses. We verified individual sensitivity of each optical parameter as the first order approach to the analysis. And we also performed structure and vibration analysis. The optical elements are fabricated using Freeform 700A. The measurement results of surface roughness and form accuracy using NT 2000 and UA3P are Ra 2.36 nm and P-V $0.13\;{\mu}m$. Finally we ascertained resolution power of $3\;{\mu}m$ using USAF (United State Air Force) 1951 IR resolution test chart.

• 한국정밀공학회지
• /
• 제16권10호
• /
• pp.35-44
• /
• 1999

The performance of interrupted cutting operations like milling is consideraly affected by cuter runout. In this study, cutter runout is selected as an important machining parameter for evaluation of machinability in ball-end milling and caused from misalignments of tool and holder, unbalanced mass of parts and tool deflection under machining. To evaluate the machinability due to cutter runout, the rotating accuracy of spindle, cutting force and surface roughness are measured. The rotating characteristics of spindle in each revolution speed were investigated by cutter runout in freeload. The predicted surface form of workpiece by measuring cutter runout data was compared with real surfaces. The results show that measuring runout with high response gap sensor is useful for studying the phenomenon of high-speed machining and the monitor surface form using in-process runout measurements in ball-end milling is possible.

• 대한후두음성언어의학회지
• /
• 제10권2호
• /
• pp.154-163
• /
• 1999

GRBAS scale, the tool fir the perceptual evaluation of voice, demands the experience of judges, and MDVP parameters of CSL, the tool for the objective measurements of voice quality demands the exact interpretation of the analyzed results. The two tools should be used as compensatory evaluation methods, so the experimental study was performed to investigate the correlation between GRBAS scales and MDVP parameters by using the pathologic voice of the 30 patients with vocal polyps, and to know the significant MDVP parameters which the inexperienced GRBAS scale judges should attend to. The 30 subjects voices, saved in MDVP of CSL were analyzed by its own analysis program, and three experienced voice therapists judged the same voices by using GRBAS scales. The correlations between them were analyzed by Spearman Rank Correlation Coefficient. As results, among the 29 MDVP parameters, 22 parameters showed statistically significant correlation with Grade(G) scale(p＜0.05). And it was found that Roughness(R) scale showed significant correlation with 18 parameters, Breathiness(B) scale with 17 parameters, Strain(S) scale with 12 parameters. In Asthenicity(A) scale, no parameter showed significant correlation. On the whole, significantly high correlation were found in the parameters related with pitch ind amplitude perturbation, especially, the amplitude perturbation.

• International Journal of Automotive Technology
• /
• 제2권1호
• /
• pp.9-16
• /
• 2001

The lifetime of power train components can be improved dramatically by finding crack initiation points with suitable software tools and optimization of the critical areas. With increasing capacities of computers the prediction of the lifetime for components by numerical methods gets more and more important. This paper discusses some applications of the outstanding fatigue simulation program FEMFAT supporting the assessment of uniaxially and multiaxially loaded components (as well as welding seams and spot joints). The theory applied in FEMFAT differs in some aspects from classical approaches like the nominal stress concept or the local one and can be characterized by the term "influence parameter method". The specimen S/N-curve is locally modified by different influence parameters as stress-gradient to take into account notch effects, mean-stress influence which is quantified by means of a Haigh-diagram, surface roughness and treatments, temperature, technological size, etc. It is possible to consider plastic deformations resulting in mean-stress rearrangements. The dynamic loading of power train components is very often multiaxial, e.g. the stress state at each time is not proportional to one single stress state. Hence, the directions of the principal axes vary with time. We will present the way how such complex load situations can be handled with FEMFAT by the examples of a crank case and a gear box.